Question about 1996 Chevrolet Caprice Classic

1 Answer

What tool do I use to remove the bolts from a passenger mirror on a 1996 chevrolet caprice?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

Normally it is a 10-12 millimeter socket or wrench sometimes both if it is a power mirror you may have to remove the door panel

Posted on Jan 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the front passenger door panel on a 1996 chevy caprice?


There are either screws holding it on,Or clips that hold it on,,Remove the arm rest first, There should be two screws hold the arm rest on, The rest is pretty bassic to do, Just use common sence end a lot of (Patience

Nov 03, 2012 | 1996 Chevrolet Caprice Classic

1 Answer

How to install replacement passenger mirror on 2003 Chevy Trailblazer? I already have mirror.


There is a small triangular door panel piece near the mirror. Remove it and remove the 2 or 3 bolts holding the mirror. Remove inside door panel. Unplug/replug electrical connection.Reinstall in reverse order.
Should be easy even if you're not a dexter with tools.

May 21, 2010 | 2003 Chevrolet TrailBlazer

1 Answer

Need instructions to remove and replace the manual remote controled outside drivers mirror on a 95 Chevrolet Caprice


Remove the door panel. Mirror is attached near door post usually with just a few screws. Electric screw motor attached to base of mirror. Be careful as mirror pops in and out and it breaks really easy

Mar 09, 2010 | 1995 Chevrolet Caprice

1 Answer

Need to replace passenger side mirror assembly on 1996 Ford GL Wagon.


1. remove the door panel by pulling lightly on the door panel.
2. remove the tweeter (small black thing in the corner of the door in front of the mirror).
3. unplug mirror if electric
4. remove the 3 mirror retaining bolts
5.replace with new mirror and reverse these steps

Feb 02, 2010 | 1996 Ford Taurus

1 Answer

Need to remove passenger mirror. How do I?


You need to remove the inside door panel to get to the three bolts that hold the passenger side mirror to the door frame. Good luck and buy extra door panel clips, there common to break. 

Sep 30, 2009 | 2002 Chevrolet Impala

2 Answers

Need to replace Mirror Assembly, 03 suburban


Your going to have to remove the inside door panel to get to the three bolts that hold the out side mirror assembly. Once you have the door panel off you'll see the three bolts that hold the mirror assembly, just un-bolt and un-clip the wire harness to the electric/heated mirror. To install the new mirror assembly, just do everything in reveres. Go to Auto Zone and by extra door panel clips, there is a good chance of breaking some of the retainer clips and Auto Zone will have the step by step instructions to replacing the mirror assembly and the removal to the door panel. Good luck and keep me posted. Be glad to help.

Jun 22, 2009 | 2001 Chevrolet Suburban

1 Answer

What tool to use for removing 96 caprice side mirror


sheesh... you tell us...your looking at it.... my guess is a T30 torx

Dec 18, 2008 | 1996 Chevrolet Caprice Classic

1 Answer

How to take off a powersteering column a 1996 chevy caprice


the bolts are all visable but you have to pull the pully off the pump because there is a bolt behind the pully you can get a pully puller at any parts store

Nov 24, 2008 | 1996 Chevrolet Caprice Classic

1 Answer

Driver and passenger mirrors on my 1996 Caprice Classic


THIS IS THE FIRST TIME I HEARD THIS. THE MRRORS MUST BE SHAKED A LOT BEFORE TO RELEASE THAT WAY. IF YOU NOTED IT YOU COULD FIX ON TIME

Aug 26, 2008 | 1996 Chevrolet Caprice Classic

1 Answer

Passenger side mirror


This is a simple job You must remove the door panel. Then from the inside of the door there is 3 bolts that hold it on pull these bolts and unpluge the connector and thats it.

James

May 26, 2008 | 1996 Mercury Grand Marquis

Not finding what you are looking for?
1996 Chevrolet Caprice Classic Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...