The turn signal on the rear drivers side will not work. Front flasher blinks quickly (is not bulbs as they were all changed). Can not find where problem may be and local mechanics cannot fix...don't want to take to local KIA dealer as they are known to pad work orders with unnecessary services.
If no power to rear indicator on one side and all the rest work ok then if bulb is ok then wireing feed to that bulb cant think of any other souce take a long piece of wire from front indicator adt touch on conector at the rear bulb if works then is wireing if not its a bad earth
SOURCE: how to change rear disc brake pads on a 2007 kia
First take of the caliper. Once you do that, take off the old pads. To get the piston pushed back, you have to turn the piston clockwise and push it in simataniously.
SOURCE: having problem changing rear brake pads on 2006 kia spectra
yes ... its a tool that you can buy at any well stocked auto parts store. Its cubed shaped, about an inch on each side, Its used to screw in the caliper piston
SOURCE: How do you replace a Drivers side headlight bulb 2006 kia spectra
Helps to remove the battery, but small ahbds can do it.
Directly behind the lens is a big round cap ... twist it off. The bulb is held in place with a spring that locks in to a notch in the holder. When handling the new bulb, don't touch the glass. The oil from your skin will cause it to shatter when turned on.
SOURCE: auto transmission hold light flashes and wont
well what i would do first is smell the transmission fluid if it smell burnt the transmission must come out,if not drop the valve body and check for a stuck valve or a check ball stuck in the separator plate try that over and out joe cool
405 views
Usually answered in minutes!
×