Question about 2005 Chrysler Pacifica

2 Answers

2005 Pacifica Tail light side marker bulb replacement

How do I get to the bulb?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You have to remove the headlight unit.Detailed instruction in owner manual pg 321-322. If you do not have the manual, it can be downloaded from chrysler web site, owners section.

Posted on Dec 25, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

If it is in the back open the tail gate you will see to black screws seperated from each other about 3 to 4 inches apart take the screw off and the taillight should comeright off they might be oxzidized a little but when you put the tail light back dont tourq it to hard for this will cause the screw to strip the plastic on the tail light

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing backup bulbs on 2005 buick rendevous


TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT

REMOVAL PROCEDURE

1. Open the liftgate.
2. Remove the screws from the tail amp.
3. Slide the tail lamp rearward in order to disengage it from the retainers on the rear body panel.
4. Disconnect the electrical connector from the tail lamp wiring harness.
5. Remove the tail lamp and side marker lamp sockets from the tail lamp, depressing the locking tab and turning counterclockwise.
6. Remove the bulbs from the tail lamp and the side marker lamp sockets, if replacing the bulbs.

INSTALLATION PROCEDURE

1. Install the bulbs to the tail lamp and side marker lamp sockets, if removed.
2. Install the tail lamp and side marker lamp sockets to the tail lamp, turning clockwise until the locking tab is fully seated.
3. Connect the tail lamp electrical connector to the wiring harness.
4. Position the tail lamp retainer slots to the tabs on the rear body panel.
5. Install the tail lamp to the rear body panel, pressing into place until fully seated.
6. Install the tail lamp screws to the Taillamp.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the tail lamp screws to 2 N.m (18 lb in).

7. Close the liftgate.

Apr 16, 2017 | Buick Cars & Trucks

1 Answer

Having trouble with headlight and tail light


It sounds like a fuse problem. You don't state what make of car but some have a fuse for each headlamp and tailight located in the box under the hood. Good luck.

May 31, 2016 | 2005 Chrysler Pacifica

1 Answer

Replace marker light


Removal Procedure
  1. Open the hood.
  2. Remove the headlamp. Refer to Headlamp Bulb Replacement .
  3. Rotate the bulb and socket counterclockwise in order to remove the bulb and socket from the housing. Remove the side marker bulb (3) or turn signal/park bulb (4) from the socket.

Oct 01, 2015 | 2005 GMC Envoy

1 Answer

Rt tail light and front marker lights not working, bulbs fine, no fuses. Whats the problem?? 2004 chrysler pacifica


My 2004 chrysler pacifica , lift gate is not open , not closing ,and i tray remote to open dosen,t work ,using by the hand nothing ,i check everything ,and i dont know wher the problem is ?????????

BEKIM

Apr 02, 2011 | 2004 Chrysler Pacifica

2 Answers

My rear marker/ running lights are out and i need to know how to get to them


Signal and Marker Lights Removal & Installation To Remove:
  1. Remove or disconnect the following:
    • Screw from the side marker lamp.
    • Side marker lamp from the front and/or rear bumper fascia.
    • Bulb/socket from the side marker lamp.
    • Bulb from the socket.
To Install:
  1. Install or connect the following:
    • Bulb to the socket.
    • Bulb/socket to the side marker lamp.
    • Side marker lamp to the front and/or rear bumper fascia.
    • Screw to the side marker lamp. Tighten to 2 N.m (18 lb in ).
prev.gif next.gif

Jan 08, 2011 | 2002 Pontiac Sunfire

1 Answer

Why after changing the brake light the icon on the dashboard does not go away


make sure you replaced it with the correct bulb number, some bulbs look identical but run at a different wattage and can trick the system. Also, check all the brake and tail lights, even the small side marker lights can turn this on. Also, if it is a brake light turning the icon on, it wont' come on until you step on the brakes, if it comes on right away, i'ts probably a tail/marker light

Oct 16, 2010 | 2001 Lexus RX 300

1 Answer

The right rear tail light and side marker lights stopped working ... bulbs and fuse replaced but still not working ... what do I check next?


I had the same exact issue to happen just last week as well. Passenger side front sidemarker/ and right rear tail both out, as well as my dashboard lights. Replaced fuses and bulbs but nothing. Stange thing is Signal light still works,,and its the same bulb. Any answers would be appreciated. 1989 MBZ 300e

Sep 08, 2010 | 1994 Mercedes-Benz E-Class

1 Answer

Marker lights on the right side of my Jetta are out


Find out which relay controls the lights and replace it.

Jan 10, 2010 | 2002 Volkswagen Jetta TDI

1 Answer

Need to replace right rear brake light bulb. can't get into the area.


Is it the rear tail light itself, or the side marker? I may have the same issue if its the side marker. However, the tail light itself is simple, remove the panel in the trunk side, and there are three seperate light fixtures, the bottom being the main tail light, the middle is the signal indicator and the top is the upper brake light.

Mar 16, 2009 | 2005 Scion xB

2 Answers

Tail Lights, Marker Lights, Air Conditioner lights out


it seems to be a wiring problem .get the wiring checked.

May 22, 2008 | 2005 Pontiac Vibe

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...