Question about 1999 Lincoln Town Car

1 Answer

1999 lincoln washer light stays on battery light goes on and off

The wind shield washer light stays on the tank is full of cleaner. The battery light comes on and goes off.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 449 Answers

Disconnect the battery for 10 seconds but you might need the code for the radio after you disconnect the battery.

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wind shield washer fluid leaking


The washer pump seal is bad in the washer tank, line has come off, or there is a hole in the tank.

Sep 07, 2014 | 2005 Ford Escape

1 Answer

2005 lincoln navigator wind sheild washer does not work


check fuse then check pump motor in the washer tank

Oct 29, 2012 | 2001 Lincoln Navigator

1 Answer

Front wind shield washer not working (back does)


WINDSHIELD WASHER PUMP, USUALLY LOCATED AT OR AROUND THE WASHER FLUID TANK. SHOULD BE ABLE TO PURCHASE AT LOCAL AUTO PARTS STORE.

CHECK TO SEE IF THE HOSE IS DISCONNECTED FROM THE PUMP BEFORE REPLACING THE PUMP.

Jul 10, 2011 | 2008 Toyota Sienna

1 Answer

Wher would the wind shield wiper fuse be located on a lincoln 98 towncar


Hello! Under the hood...Near the battery...Fuse #16 (30A)...

Guru........Saailer

Sep 08, 2010 | 1999 Lincoln Town Car

1 Answer

I HAVE A '99 LINCOLN NAVIGATOR WITH A ELECTRICAL PROBLEM. NEW BATTERY AND ALTERNATER AS OF YESTERDAY. APPEARS TO BE CHARGING BY THE INSTRUMENT GAUGE BUT AS I WAS DRIVING TO WORK THE BATTERY SYMBOL DASH...


Items to check:
Try wiring behind alternator.may be full of corrosion.
One of the accessories maybe shorting out and draining battery.
(Techns know how to find this out)

Aug 24, 2010 | 1999 Lincoln Navigator

1 Answer

Wind shield wiper fliud will not squirt out


if the pump is operating,go to a place that has compressed air and without full force air pressure pressurize the washer fluid tank,sometimes they get a slug of dirt in the line,careful with the pressure so you dont blow off hoses

Feb 27, 2010 | 1999 Saturn SL

1 Answer

99 Windstar: back blinker lights stay on after exiting car,


some of the wind star had bad wireing in the back. ive towed a bunch of the in for that and then towed them to the ford dealer to get fix.good luck

Apr 14, 2009 | 1999 Ford Windstar

1 Answer

1997 Lincoln Town Car washer fluid light on panel.


replace fluid tank. might find it cheap in a junkyard

Apr 01, 2009 | 1997 Lincoln Town Car

1 Answer

Can a shade tree mechanic change the clutch in '97 mitsubishi 3000?


Removal (3000GT AWD)
1. Remove air cleaner cover, air hoses and vacuum pipe. Remove air cleaner, intake hose, battery, battery
tray and washer tank.
2. Disconnect transaxle control cables and speedometer cable. Raise and support vehicle.
3. Remove both inner fender splash shields. Remove clutch tube bracket and disconnect clutch release
cylinder (including clutch damper assembly on FWD models) and wire aside. Support transaxle assembly
with jack and disconnect upper transaxle mount. Remove mount, bracket, plug and stoppers.
4. Remove transaxle assembly upper coupling bolts. Disconnect tie rod ends and lower arm ball joints.
Remove right support member, starter cover (if equipped) and starter.
5. Remove left side bearing bracket mounting bolts and pry left axle shaft from transaxle. Wire left axle
shaft and inner shaft assembly aside. Pry right axle shaft from transaxle and wire aside.
6. Remove front bank side and rear bank side transaxle stays. Support transaxle assembly with a
transmission jack. Remove transaxle assembly lower coupling bolts and lower transaxle from vehicle.
7. Insert a clutch alining tool to prevent pressure plate and clutch disc from falling. Loosen pressure plate
bolts gradually in a crisscross pattern to avoid warping pressure plate flange. Remove pressure plate and
clutch disc.

May 14, 2008 | 1999 Mitsubishi 3000GT

Not finding what you are looking for?
1999 Lincoln Town Car Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...