Question about 1992 Buick Park Avenue

1 Answer

Regarding my 92 Park Ave. Thank you- one more question

I sure appreciate your help! I need to mention though, that the car nowseems to run fine while it is cold...once it warms up, this is when allthe problems of dying are now happening. Do you still believe I shouldconsider the Crank sensor and / or the map sensor after this? I'mcurrently trying to find a picture of the crank shaft sensor on thedampner / pulley bracket to help me recognize the actual item. Being adisabled mom and "use to be" back yard mechanic, lol. These newervehicles are a huge puzzle to me.
Thank you again for everything!

Posted by on

  • patti33b Dec 21, 2008

    The picture was a huge help, although I've discovered that the absolute problem was the O2 sensor after all. I just unplugged it, to see if it was the problem, (didn't even really know what it was at first, then once I unplugged it, I figure the map sensor would take over. So far it works great. The car runs like new. No probs what so ever! If you hadn't mentioned the map sensor was on top, I wouldn't even have noticed the 02 sensor at all. Thanks again for all your help.


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

Here is a picture of a crank senosr and its approximate location.http://www.vortexbuicks-etc.com/crank%20sensor.jpg I would change the map sensor first thats the most likely cause of your problemand its on top. Godd Luck

Posted on Dec 18, 2008

  • O Mclean Dec 22, 2008











































    YOU ARE WELCOME































    you

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Park brake light stays buick century


if the fluid is brown and dirty it maybe effectn the abs module-can ruinit but u stil hav regular brakes--get car scanned at a partsplace fora readout and clear the lite--modules can cost 1000$ but remembr their just a luxury--good drivers dont need antilock brakes

Sep 11, 2013 | Cars & Trucks

1 Answer

92 park ave AC won't go to auto stays on economy


If the freon level is ok, you have an electrical problem somewhere. The system will not activate because the control module "thinks" the freon level is low or because of another problem. It could be the module too.
You'll need a shop manual to get the test procedures for climate control ac to check the components and circuits.

Jun 11, 2013 | Cars & Trucks

1 Answer

My signal lights wont blank...on my 92 bucik park ave...which ones do i replace


be sure and check the flasher unit , the bulbs with 2 filaments are the turn signal bulbs, normally each bulb needs to be checked , your bulbs will be an 1157 bulb and you can get those at any parts store

Jul 06, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

Reset climate control on 92 park ave , just blinks


try disconnecting the battery for 5 minutes, also make sure the system has a full charge, a low refridgerent charge will trigger this blinking light.

Aug 09, 2009 | 1992 Buick Park Avenue

1 Answer

Try to locate body control module on a 94 buick park ave


BCM --The Body Control Module is located on the right side of the vehicle and positioned under the instrument panel. In order to gain access to the module, it will be necessary to first remove the trim panel.

Jun 23, 2009 | 1994 Buick Park Avenue

1 Answer

95 buick park ave car running radio off,igniton on accradio works


Who ever took the radio out is guilty. The power wires must have been reversed. One is supposed to have power all the time, (memory)and the other just when your ignition is on. Apparently, they got mixed up.

May 18, 2009 | 1995 Buick Park Avenue

1 Answer

92 buick park ave security light on car wont start


Someone put the wrong key (resistor value) in the ignition lock, you will have to disconect the battery for 3 min. Make sure you have the right key. Very important! Make sure the climate control is off before disconecting/conecting the battery.

Apr 18, 2009 | 1992 Buick Park Avenue

1 Answer

Buick park ave hood emblem


Do you still need info on this?

Jun 13, 2008 | 1995 Buick Park Avenue

Not finding what you are looking for?
1992 Buick Park Avenue Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...