Question about 1991 Oldsmobile Cutlass Ciera

3 Answers

1991 olds wont start

Have a 1991 olds cutlass ciera belive there is a broken wire in the ignition somewhere, have a chiltons with wiring diagrams in it but no diagram for the ignition wiring, help.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have no spark. Changed the CSS and still no spark. I also changed the Coil packs with a junk yard 1. Does anything else control spark other then ECM?
Thanks

Posted on Jun 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Change the crankshaft sensor mine did that too. fixed it for good.

Posted on May 01, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Why does my 1991 cutlass quit running after about 30 minutes of operation,and why do i have to weight about 15-39 minutes before it will start again?

Posted on Apr 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you check the timing on a 1988 oldsmobile cutlass ciera 3.8


images for 1988 oldsmobile cutlass ciera 3.8 wiring

Need diagram for 88 olds 3.8 engine`firing order - Fixya

www.fixya.com/.../t9979847-need_diagram_88_olds_3_8_engine_firin...
Aug 3, 2011 - need diagram for 88 olds 3.8 engine`firing order - Oldsmobile 1988 Cutlass Ciera question.

Sep 24, 2015 | Oldsmobile Cars & Trucks

1 Answer

Cutlass ciera radio diagram


go to the book that came with the car. what r u looking 4 in the diagram? r u Trying to wire this into the car? lol.

Apr 27, 2014 | 1991 Oldsmobile Cutlass Ciera

1 Answer

1991 cutlass ciera wont start when it is damp outside


When it starts try this.

get a spray bottle and fill it with soapy water. Start the engine and systematically start spraying the spark plug wires. If you hear or see arcing from the wires replace them.

Feb 03, 2012 | 1991 Oldsmobile Cutlass Ciera

1 Answer

1991 cutlass ciera wont start when it is damp outside


When it starts try this.

get a spray bottle and fill it with soapy water. Start the engine and systematically start spraying the spark plug wires. If you hear or see arcing from the wires replace them.

Feb 03, 2012 | 1991 Oldsmobile Cutlass Ciera

1 Answer

I am wondering where the ignition control module is located on my 1991 Olds Cutlass Cruiser SL?


I will assume it is a 2.5 liter. The control module is bolted to the back of the block underneath the intake manifold. The assembly incorporates the crank sensor, module and coils. Just follow the spark plug wires and you will find it.

Sep 06, 2011 | 1991 Oldsmobile Cutlass Ciera

1 Answer

I have 1991 Oldsmobile Cutlass Ciera, I am trying to do the turn up by my self. But I am not to sure What the turn up consist of. Can You please help?


If you are referring to a "tune-up", then for a complete tune-up for your vehicle you will need to replace the ignition wires (spark plug wires), spark plugs, air filter, the fuel filter, and also the pcv valve. There is no distributor in your vehicle so that is all that a complete tune-up for your vehicle will consist of. Here is a firing order diagram for both engines that were available for that vehicle to help assist you replace the ignition wires, and let me know if you require any further assistance.

2.5 Liter Engine

ee19917.jpg

3.3 Liter Engine

f5ea610.jpg

Aug 04, 2010 | 1991 Oldsmobile Cutlass Ciera

2 Answers

92 Olds Cutlass Ciera ignitian code needed


i dont have it but if you register at www.autozone.com you can get it for free and registering is free and they have all kinds of free help and diagrams for you

Sep 01, 2009 | 1991 Oldsmobile Cutlass Ciera

2 Answers

1991 olds cutlass calais - will not start - no fire to spark plugs - is there a rotor or coil?


depends on the engine. most of these cars are computer controlled and use crankshaft and camshaft sensors to properly send timing and fire info to allow the car to start and run. Coils in these engine are usually a pack bolted on the left side of engine (sparkplugs will feed from them to the sparkplugs.

Crankshaft and Camshaft sensor for GM are usually mounted at the harmonic ballancer, the sensor have three to four wires in them check for old rubbery wire and broken insulation first, if alot of oil or antifreeze is on the wire it will break down the plastic covering. If wire is bad replace the wire. If wire is good then change the sensors and all should be good.

Sep 01, 2009 | 1991 Oldsmobile Cutlass Ciera

1 Answer

Need to see wiring diargam for cutlass ciers olds 1995 engine


To get the most accurate diagrams, purchase a Chilton's, or Haynes manual for your car. They have ALL of the wiring diagrams for every system of your vehicle and they're very easy to follow. The books can be purchased online, or at most auto parts stores for around $15

Jun 07, 2009 | 1995 Oldsmobile Cutlass Ciera

1 Answer

1991 olds cutlass supreame 3.1,no power to starter


The wires going to the starter, are fuseable links one might be broken. pull slighty if the wire streaches then the link is blown. Replace.

Apr 12, 2009 | 1991 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1991 Oldsmobile Cutlass Ciera Logo

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...