Question about 2006 GMC Envoy Xl

1 Answer

Headlight switch My friend has a 2006 Envoy and the headlight now has only high beam regardless which setting the switch is on. She usually keeps the switch in the running light posistion, but now she has no low beams. I see on the net where this is a problem for others but no solutions offered, One person said they replace the swich but no change. Please help....... Thank You, KT

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Take it to da dealer

Posted on Apr 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Hyundai Tycson GL Headlight Problems


Could be a defective headlight relay, Located in the fuse block in engine compartment,

Nov 29, 2012 | Cars & Trucks

1 Answer

High beam headlights stuck on replaced switch same problem


It can be issue with headlight switch,but as its already been replaced.Try disconnecting high beam headlight wiring from headlight assembly and reconnect direct external wire from headlight switch to headlight assembly,then by switch see if headlight is getting off and turning on or not.
See below related help links,similar to your issue.Click the link below:----
Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

----------------
Only high beams working on GMC Savana?---------- High beams stopped working but headlights still work? http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html
---------- Working of Headlight switch? ----------

Both headlight bulbs blow together?
----------

Car headlight bulbs don't last long?

------------ Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------
these will help.
Thanks.

Nov 06, 2012 | 2007 Chevrolet Tahoe

1 Answer

2006 Volkswagon Beetle, drivers side headlight, high beam not working


Instructions
    • Turn the headlight switch on and inspect the headlights. Make sure to check both low- and high-beam lights, and then note the position of the bulb in the headlight assembly. Low-beams are in the top cavity of the assembly and high-beams are in the lower cavity.
    • 2Turn off the headlight switch and then remove the keys from the ignition.
    • 3
    • Open the hood and locate the seam to the headlight assembly and the side fender. Locate the headlight assembly release lever and push in on it slightly to unlock it and then pull it all the way up until it stops.
    • 4Place a blanket or pillow on the ground in front of the headlight assembly. Push the assembly outward from behind with one hand while being ready to catch the assembly with the other. The New Beetles use an adhesive sealant to protect the back of the headlights from exposure to moisture, so you'll have to give the assembly a push from behind.
    • 5Pull the wire harness plugs off from both the high- and low-beam blades of the respective bulbs.
    • 6Place the assembly on the blanket or pillow. Release the wire clip to the faulty headlight and then remove the headlight bulb.
    • 7Open the package of the new H1 bulb replacement without touching the glass portion of the bulb with your bare skin. Oils in human skin will damage the bulb. Handle it only by the metal base of the bulb insert.
    • 8Insert the new bulb in the appropriate headlight-assembly cavity and reattach the bulb retaining clip to lock the bulb in place.
    • 9Lift the assembly up and plug the wire harness plugs back into the respective blades of the bulbs.
    • 10Push the headlight assembly into its cavity, but before locking it in place, check the lights by turning on the headlight switch.

Sep 17, 2012 | 2006 Volkswagen New Beetle

1 Answer

Change 04 envoy bulb


Headlight Replacement (Envoy)

Lift hood, at top of each headlight assembly look for two L-shaped tabs. Pull these tabs straight up, this will release the headlight assembly. Lift assembly forward to gain access to rear of assembly. There two rubber caps, the top one is for access to the low beam and the bottom for the high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side of socket, install new bulb, DO NOT touch bulb glass with fingers. Reverse steps to re-assemble.

Jun 18, 2012 | 2004 GMC Envoy

1 Answer

2004 envoy xuv low beams dont work switched fuses 45 and 46 still nothing any ideas


Other possibilities are; the bulbs themselves, burnt or corroded bulb sockets, or a bad headlight selector switch.

Dec 11, 2011 | 2004 GMC Envoy

1 Answer

2002 gmc envoy has no low beam headlight both.is the problem would be a headlight switch.how to replace a headlight switch..thank you..;.


it might only be a blown fuse, check the fuses in the fuse box, HIGH & LOW beams usually have their own fuses.....hope this helps......cheers.

Sep 24, 2011 | GMC Envoy Cars & Trucks

1 Answer

2006 GMC Envoy low beam headlights dont work. All fuses, and bulb filements, are fine.


Hello, try to start by checking the headlight relay and headlight fuse. You also may want to check to make sure the bulbs aren't blown out. If those parts check out to be fine and in working order, you may need to replace the turn signal assembly in the steering column. This part controls the hi/low beams. This may sound crazy but, when GM wired their older trucks, they wired the headlights to go from the battery, to the hi/low beam switch, then to the headlight switch (to the left of the steering wheel) then out to the light bulbs. You can kind of test to see if this part is good by making a fist and (with your headlights on) gently hitting the plastic cover for your steering column that is right behind your actual steering wheel. This could cause your headlights to flicker on and off.

Thanks

Aug 09, 2010 | 2004 GMC Envoy

1 Answer

Both low beam headlights are out and i need to check the fuses and i need a fuse giagram


The headlights do not have a fuse,check to see if they are just burned out,use a test light ,cheap at the parts store,and check where the headlight plugs in at,turn the headlights on,see if it will light the test light,,if it does,then the head lights are burned out,if it does not,then if the high beams work,then the dimmer switch is bad.

Apr 28, 2010 | 2006 GMC Envoy

1 Answer

2003 GMC Envoy Low beam headlights will not work.


I would start by checking the headlight relay and headlight fuse.  You also may wanna check to make sure the bulbs aren't blown out.  If those parts check out to be fine and in working order, you may need to replace the turn signal assembly in the steering column.  This part controls the hi/low beams.  This may sound crazy but, when GM wired their older trucks, they wired the headlights to go from the battery, to the hi/low beam switch, then to the headlight switch (to the left of the steering wheel) then out to the light bulbs.  You can kind of test to see if this part is good by making a fist and (with your headlights on) gently hitting the plastic cover for your steering column that is right behind your actual steering wheel.  This could cause your headlights to flicker on and off.  It's not 100% guarenteed that this method will work, but it may.  
Any questions, just ask!

Feb 02, 2009 | 2003 GMC Envoy

1 Answer

Headlights


well if you have a beam!!! that means fuse are okay if you have a spare bulb try it and see if this gives you back a low beam as well as hi beam if not look under hood in fuse cluster open lid diagram shows witch is the head light relay good place to start.John

Dec 29, 2008 | 2006 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...