Question about 2000 Ford Focus

1 Answer

Installation of the heater blower motor

Do i have to take the dash out to replace the motor?
i have already changed the thermal fuse

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,041 Answers

Yes remove the lot,sorry to bring you such good news

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change heater blower motor in a 1996 pontiac grand am.


under dash but first check fuses ,switch and relay. Big job to pull the heater out from under dash.

Aug 09, 2014 | Pontiac Grand Am Cars & Trucks

1 Answer

99 maxima gle heater blower motor resister or amp


This sounds like the blower motor is burned out or the built in thermal fuse is popped in the blower motor resistor module in which case both the blower motor and the blower motor resistor should be replaced as one repair..

Apr 27, 2012 | Cars & Trucks

1 Answer

1992 323 mazda want blow heat out


REPLACE THERMOSTAT.IF ALREADY DONE.CHECK HEATER BLOWER MOTOR SEE IF POWER GOING TO HEATER BLOWER MOTOR.IF YES BLOWER MOTOR BAD.IF NO POWER GOING TO BLOWER MOTOR CHECK AC AND HEATER CONTROL FUSE AND CHECK BLOWER MOTOR FUSE AND RELAY IF ALL IS GOOD CHECK SEE IF POWER GOING TO AC AND HEATER CONTROL SWITCH IF YES THE AC AND HEATER CONTROL SWITCH COULD BE BAD.

Nov 10, 2011 | 1991 Mazda 323

2 Answers

Does that hole dash and heater box have to come out to replace the blow motor on my 2001 grand caravan?


No it does not,you should just have to take the bottom dash panel off on the passenger side.

Feb 02, 2011 | 2001 Dodge Grand Caravan

1 Answer

Hi, i need to remove and replace the blower motor for the a.c./ heater, and dont know where it is located. can you please help?


Blower Motor Removal & Installation To Remove:
  1. Remove the insulator from under the right side of the dash.
  2. Disconnect the electrical connector from the blower motor.
  3. Remove the blower motor retaining screws.
  4. Remove the blower motor.
To Install:
  1. Install the blower motor.
  2. Install the blower motor mounting screws.
  3. Connect the electrical connector to the blower motor.
  4. Install the under dash insulator.
prev.gif next.gif

Dec 10, 2010 | 1999 Pontiac Grand Prix

3 Answers

I have a 2006 Grand vitara and the A/C or Heater does not blow air. What part is responisble for this.


FIRST CHECK HVAC FUSE AND BLOWER MOTOR FUSE AND RELAY.IF BOTH CHECK OUT OKAY PROBLEM COULD BE HVAC CONTROL SWITCH OR MODULE OR THE BLOWER MOTOR IS BAD.TO KEEP FROM SPENDING ALOT OF MONEY.THE HVAC CONTROL MODULE CONTROL SWITCH VERY EXPENSIVE.IT COULD COST $300.00 TO $400.00 DOLLARS.WHAT I WOULD DO IS REMOVE BLOWER MOTOR IN THE LEFT REAR TRIM PANEL.HOT WIRE TO BATTERY USING JUMPER WIRES.IF BLOWER MOTOR RUNS ITS THE HVAC SWITCH.IF BLOWER MOTOR DONT RUN REPLACE IT.IF THE HVAC IS BAD BEST FOR DEALERSHIP TO CHECK IT OUT.BECAUSE YOUR DASH HAS AIR BAGS IN IT. WHICH WOULD BE DANGEROUS.

Mar 18, 2010 | 2006 Suzuki Vitara

1 Answer

Heater fan motor quit working already checked all fuses and relays


check the fan switch in the dash and the fan motor connector for burning, if u find burned connectors replace them and the heater blower switch.

Mar 08, 2010 | 2003 GMC Sierra 1500

2 Answers

My blower is not working for my heater


first off! check the heater blower fuse in the fuse box if it is good? then check the power lead to the heater motor itself as well as the ground wire to it to insure proper connection if that all checks out satifactory then take a jumper wire from the B+ side of the battery straight to the heater motor if the motor fails to run then change the motor if it does run? then check / change the blower motor relay

Jan 24, 2010 | Fiat 124 Cars & Trucks

5 Answers

The fan does not blow. Both fuses are good [40 amp under hood & 20 amp under dash]. Heat does come through when driving but the motor does not blow. I have read to check the cable to the heater coil...


Normally, blower resistor for aircond car can be fuse blow. (Thermal fuse type). In my case, civic 1.7 ex 2002, i take out a part (DENSO 077800-0682) and open the black cover. inside there, have electronics board with some components. The Thermal fuse is paraller with Power FET. If you can't get the thermal fuse to change (checking using ohm meter to confirm it has cut off), just take a small wire and soldering between to leg of the thermal fuse. Then, try reassemble your blower resistor denso 077800 and try on your aircond.

Jan 08, 2010 | 2004 Honda Civic

Not finding what you are looking for?
2000 Ford Focus Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...