Question about 1999 Chrysler 300M

2 Answers

Had to get my 1999 chrysler 300m jump started because i left my lights on all day yesterday. everything worked until i cut it off later i notice i needed another jump and it toke a little longer to start this time but it did i allo the car to run for a while and turn it off and now it will not start the lights are on as if the car would start

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 35 Answers

Not to be smart but how about It's time for a new battery. Just had to replace one in a 2000 300M.
Interior and head lights worked but would not start. Thought it was the engine immobilizer. The car would sometimes start and not others.

Posted on Dec 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You need to lock and un lock the doors with the key fob to reset the security codes and then it will start.

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 300m stalls unless i step on gas pedal


Check for black crusty tarnish in the throttle body

Apr 05, 2014 | 1999 Chrysler 300M

1 Answer

Check engine light


If you get the computer scanned for trouble codes you'll probably find one for the speed sensor in the transmission.
The sensor and circuit would need to be tested.

Apr 29, 2013 | 1999 Chrysler 300M

1 Answer

2000 Chrysler Sebring w/year old battery.  Advise, what could have occurred when AAA jump me???  Left tiny interior light on under my mirror--battery dead.  After AAA came, I let it run


I doubt the service person did anything wrong. In today's cars with both engine and body computers, jump starting a car can be risky.
You're better off having the battery charged for an hour or so then trying to start it.
You may have to have the body computer scanned and possibly flashed to get everything working again. The body computer controls everything you mentioned. It could have lost some of the factory programming when the system was dead.

Sep 19, 2012 | 2000 Chrysler Sebring

2 Answers

My 1999 chrysler 300m is always stalling while driving i bought brand new batt. Could it be a sensor that cause it to keep cutting off.


Battery probably not the problem. If it is stalling while driving, is there a service engine soon or check engine light that goes on before it stalls? If so, there is likely a code or codes stored in the computer that should point you in the correct 'sensor' direction, or tell you why it is stalling.

Nov 04, 2011 | 1999 Chrysler 300M

1 Answer

My 99 chrysler 300 wont start its making a clicking noise and lights on the dash are flicking on an off. Shop replaced battery alternator and the wire connecting the battery to the alternator. When you...


Dirty connections or corroded cables. Clean and/or replace what you can on the + and - side. + to the battery and the +starter position, and especially the - from the engine to the ground The ground is VERY important to look at here, since it is a jump start that makes it go. Let us know.

Jul 16, 2011 | 1999 Chrysler 300M

1 Answer

Our car worked just fine yesterday, went to start it today and it won't turn over. What should we do? It's a 2001 chrysler 300m


battery weak? if is if you have a charger or jump it off ,then go have battrey checked..may need new one, it's winter time!!!!!!!!!!!

Dec 20, 2010 | 2001 Chrysler 300M

1 Answer

Chrysler sebring 1999


Sounds like you fried something when you jumped it. Make sure all the cables and wires are good and not burnt. Check fuses, and replace as necessary.

Jun 04, 2009 | 1999 Chrysler Sebring

1 Answer

1999 chrysler 300m stalls when coming to stop and low power


Change the Cam Position Sensor.. It done the same thing on mine. The sensor runs about
40. to 60.00 at most parts stores Your gonna have to take off the upper intake or plenum to
get access to it. Top of the engine right side, you'll see it

Nov 28, 2008 | 2004 Chrysler 300M

1 Answer

1999 Chrysler 300M overheating


I am having the same prob. on 04 300m 83,000 mi. I am a chrysler tech and another tech at my shop had the same problem a week ago. Mine started when i Was on the thruway my guage crept up to 3/4 so i kicked the heat on and it went normal. After stopping I found the water pump went and was leaking bad. I replaced the waterpump timing belt and tensioner pulley. thought it was good untill on a long trip. Noticed temp goin up no leaks this time, coolant full. doesnt overheat with heater on. Actuated fans with DRB3 and both work and are working when car says its overheating. Replaced thermostat and bleed system. thought it was ok untill drove 35mi. suspecting bad wiring plugged radiator or coolant temp sensor. Still driving with heat on low to keep from overheating. any others fix this problem yet?

Nov 03, 2008 | 2000 Chrysler 300M

Not finding what you are looking for?
1999 Chrysler 300M Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...