Question about 1988 Daihatsu Charade

1 Answer

Eng.t/plant 1.6 applause into g100 3cyl

Looking for ChasDaihard if your in NSW Aust would like to meet you. anyway any thourghts on eng. mounts?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 98 Answers

It's doable. Some of G100 series (G100, G101, G102) had the fours fitted, so you should be able to do a cut and shut from a donor car.

The 1.6 HDE engine is pretty much the same physical dimensions as the 1.3 HCE and 1.5 HEE. The HDEG is the Detomaso version, which includes a different cam profile, higher compression and extractors.

Beware the infamous G100 chassis cracks around the front suspension, if you decide to raise the ponies..

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Change a thermals stat on my Hyundai applause 1993 model

Trace the top black radiator hose from the radiator to where it mounts on the engine. Chances are, that is where it is located.

Jan 07, 2015 | Hyundai Cars & Trucks

1 Answer

Eng has new top end new bottom end except crank has peck in bottom end why new eng except crank

If the journals look good and meet wear tolerances, it is an unnecessary expense to replace the crank.

Oct 10, 2013 | Cars & Trucks

1 Answer

Handle part for daihatsu applause

Why not admit defeat and scrap her then?

Dec 19, 2012 | 1993 Daihatsu Applause

1 Answer

1999 Chevrolet Lumina radiator replace

there are 2 13mm bolt on above radiator and 1 facing in front take those off,
loosen two 15 mm on eng side and move it up, back towards eng

when you open the second one ENG shift back few inch
but don't worry, you can easily pull it back to position by hand when you are done
unplug the passenger side fan and take it out

driver side is tricky to unplug,I unbolted it first kind of twist it to get a better look use the pick tool topull the tab and unplug it

don't forget to unplug coolant level sensor on passenger side just below radiator cap

May 19, 2012 | 1999 Chevrolet Lumina

2 Answers

Is my motor a 350 the intake number is 14102182

yes it is. i checked through the GM database,and it shows that is a 350 engine,and in case your wondering,that is a factory original intake,not an aftermarket..and was cast in the Flint Michigan plant on machine number 2, and on second shift.
thanks for giving me something to give me a reason to get in that database!!!!

May 01, 2010 | 1988 Chevrolet K2500

1 Answer

How many motor mounts on a 2000 ford focus

1 motor mount right front side, then there's a trans mount left front & torque strut mount. I checked out a nice Poly set (eng & trans) on eBay at about 28.00 includes shipping. Item #170433115996

Jan 30, 2010 | 2000 Ford Focus

2 Answers

Distributor replacement

Not really.

I have had success on various units retrofitting with the Handi Van innards.

See here

Dec 14, 2008 | 1988 Daihatsu Charade

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers


Level 3 Expert

61249 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides