Question about 2002 Ford F250 Super Duty SuperCab

1 Answer

Signals/hazards Turn signals-hazards quit working. Not even a light on the dash indicating that a bulb would be burnt out for the signals. Both quit working at the same time. Looked in the book, but didn't give any info.

Posted by on

  • Anonymous Dec 22, 2008

    trailer light don't work

  • Anonymous Dec 23, 2008

    no signals

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

There is two seperate relays for right and left trun singals, they are located under the hood in the relay box. i would start there this is a fuse that powers them both, in the same relay box

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals and hazards are not functioning


Check the bulbs the dash lights will still come on even if the bulbs are blown. A good way to tell does the lights stay own are do they flash ?

Oct 12, 2014 | 2002 Dodge Caravan

1 Answer

Only front left signal flashes when hazard lights or on, does get a dash indication light but only the left one; turn signal lights work but sometimes stays on solid (doesnt blink) on the dash. is this a...


I would check each bulb on the side with the most issue, usually when one light goes out,for whatever reason, the system is designed to malfuntion signalling an alert to the operator..with the lights and hazards on, check each fixture for good operation while opening up each light take the bulbs out and inspect them for defects, replace with new if anything is doubtful be careful with the bulb grease dont get any on the contact points because it will get hot and cause small issues.. do each light at a time until all 4 are working fix any defects to include burnt fixtures and broken wires and make sure all grounds are good also, these connectors are notorious for rust and corrosion so clean them well before reinstalling , I use the same bulbs in my 92 dodge so i am aware of the type..good luck..

Jan 13, 2013 | 2004 Ford Explorer

1 Answer

2004 gmc denali: backlit dash lights do not work


Check your bulbs first, I have lost both headlights on my ford at once on account of the bulbs burning out at the same time. Same thing probably happen, you have one filament out. The lights can work, but if the filament for brake is burnt, you don't see brake lights.

Sep 12, 2012 | Cars & Trucks

2 Answers

Right turn signal flashes fast


One of the bulbs is burnt out. Turn on hazard lights and check bulbs.

Dec 31, 2010 | 2005 Ford Taurus

1 Answer

Signal lights have power and work will not blink when indicator is on light stays solid and hazards light do same.


that is usually an indication of a burnt out bulb in the turn signal/hazard lights. the other possibility may be a bad flasher. Check all the running, blinker and hazard lights by turning them on one at a time and walk around the car looking for burnt out lights.

Aug 17, 2010 | Toyota Camry Cars & Trucks

1 Answer

Rear turn signal and hazard light don't flash (left side only)


The rear left turn signal bulb must be replaced immediatly before it melts the light socket, if it has'nt yet. Also please verify that the correct light bulb is being installed. because even though many bulbs look the same they are not identical. Installing the wrong bulb can be the begining of many, many problems in the particular circuit

Mar 26, 2010 | 2000 Ford Focus

1 Answer

Indicator Problem


when you noticed the indicator being on solid, but flashing with the hazards, are you inside your car? I mean have you gotten out of your car to check if the bulbs are working when the indicator thrown and when the hazards are on. A hard on indicator usually means that you have a bulb burnt out. The hazards will still flash as normal when inside the car even if a bulb is burnt out because the hazards do not run via the Electronic Flasher Module. The EFM is what detects a burnt out bulb

Aug 24, 2009 | 2005 Audi A3

2 Answers

Hazards and blinkers not working


There are separate fuses for the turn signals and blinkers, but you should check both of them just to see if they're good.

You may have a burnt out turn signal bulb as well. I know that this sounds like an obvious answer, but a single bulb can sometimes disable the entire system because of the way that some flashers operate.

You could also have a defective turn signal/hazard light flasher. This is located under the dash board on the driver's side between the steering column and the door. You have to remove the sound insulation/kick panel (the cover on the bottom of the dash board) to reach the flasher (it is easy to remove - I don't think you even need tools).

May 16, 2009 | 1997 Pontiac Grand Am

1 Answer

My turn signal quit working in my 1995 Mazda B2300 2WD Pick-up


Keepthecmd: where is the signal relay located? how do I find it?

May 10, 2009 | Mazda B2300 Cars & Trucks

3 Answers

No turn signals


they are seperate flashers. most times they are both on fuse block or clipped along the metal inside edge of the lower part of dash. Don't count on that. if someone changed it once, it could be tucked into wiring somewhere.

Feb 06, 2009 | 1994 Chevrolet Camaro

Not finding what you are looking for?
2002 Ford F250 Super Duty SuperCab Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...