I went to get an oil change and my control arms needed to be changed. The repair shop fixed everything but now my suspension is low, nothing on the steering wheel works and all of the fault lights are on. They tried taking out the battery to reset it but I know there is more to the problem but what?
This is not a problem you should try to solve. The workshop obviously stuffed up and it is their job to fix it, even if they have to end the vehicle elsewhere to get it right, Do NOT be nice about it!
My guess is that the ECU needs to be reset and only an experienced Land Rover shop will have the gear and experience to do it correctly
SOURCE: Steering Vibration (Death Wobble)
HEY I HAVE A QUESTION YOU DONT FEEL THE PROBLEM WHEN YOU HIT THE BRAKES AT HIGH SPEED IF YOU DO THE PROBLEM IN WHIT YOU BRAKES YOU NEED TO DO NEW SURFACE IN YOU ROTORS AND PUT NEW BRAKES
SOURCE: change battery everything gone dead will not take land rover disc
Firstly, pop a new battery in the fob.
Now we can enter the EKA.
Close all the doors.
Turn
the key in the driver door lock to the unlock position and hold there
for at least 5 seconds until the alarm sounds once. Then return to
centre - always ensure you return to centre and do not delay more than
10 seconds between turns, or hold in the position for more than 5
seconds or you will reset to the start. Turn to full extent of travel.
1st
Digit turn to unlock the number of times specified.
2nd Digit turn
to lock the number of times specified.
3rd Digit turn to unlock the
number of times specified.
4th Digit turn to lock the number of times
specified.
Finally turn to unlock once more. If it is correct a
double bleep will sound (single bleep is incorrect code)
You now have
a 5 minute delay - don't open any doors. The anti-theft indicator will
continue flashing once every 2 seconds for the five minute period. When
this goes out, open the door and start within 30secs.
After 3 failed
attempts, the security system invokes a delay period of 10 mins during
which the system will not accept any further attempts to enter a code.
SOURCE: after changing lower front control
try disconnecting the battery and then join the battery cables together and leave overnight and see if clears the fault
SOURCE: we change the front left
Call tire and muffler shop (or any shop that replaces suspensions work) it's probably a reset somewhere.
SOURCE: took my 2006 land rover
any bonnet light come on? Youll need to have the potentio meter at each axle inspected for disconnection
54 views
Usually answered in minutes!
×