Question about 1999 Ford Mustang Cobra

1 Answer

Windshield washer fluid is not being pumped out

My windshield wipers work, but when I pressed the stick in to pump out the windshield washer fluid, no fluid came out. I heard a sound when I pressed it.

Posted by on

  • 2 more comments 
  • Anonymous Mar 24, 2014

    how to take out the windshield washer fluid tank

  • Anonymous Mar 24, 2014

    replace

  • Anonymous Mar 28, 2014

    Washer does not run

  • Anonymous Mar 31, 2014

    windshield washer pump doesn't work

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Has it got to below freezing in your area recently? If so, your fluid is probably frozen and will need to be replaced. That is the only thing I can think of. It happened to me recently! Good luck I hope this helps

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2007 Saturn Vue there is what I think is an air pump which is cracked that one port is not connected to anything.


There is a electric motor that pumps washer fluid . Located in the bottom of the washer fluid tank .
Wash Operation (Front and Rear Wipers)
The front and rear washer systems use the same windshield washer fluid pump. When either the front or rear wiper is in the washer position voltage will be supplied to one side of the windshield washer fluid pump (depending on whether it is front or rear), while the other side of the pump is grounded.
At this point, the windshield washer fluid pump sprays solvent onto the windshield. When the front or rear washer is activated, the BCM receives an input from the switch that is activated. The BCM will control the wipers while in the WASH mode. The BCM will control either the front wiper relay or the rear wiper relay to turn on the wipers. The windshield wipers operate at low speed for 3 swipes and returns to the park position.

When turning on the washers do you hear the motor run ? Have some one try it while you listen at the washer fluid tank ! These pump motors do go bad .
turn OFF the ignition.
Disconnect the harness electrical connector of the windshield washer fluid pump.
Connect a test lamp from the windshield washer pump control circuit to a good ground .
Turn ON the ignition, with the engine OFF.
Press the front washer switch.
Does the test lamp illuminate?
YES or NO !

Nov 18, 2016 | Saturn Cars & Trucks

2 Answers

My windshield wiper motor works, but washer does not work/


I would start by checking fuses. If you've checked already, then the windshield washer pump has probably gone bad. The wiper motor and washer pump should be separate units. Typically the washer pump is located in the base of the washer fluid reservoir.

Dec 19, 2013 | 2005 Dodge Neon SXT

2 Answers

Windshield washer not working


  1. check your windshield washer fluid level.
  2. make sure you can hear the fluid pump operating when you operate the switch.
  3. If you can hear the pump working and you have fluid in the reservoir but still no spray,
  4. check the washer fluid lines don't have holes and aren't clogged or pinched. check the sprayer nozzles make sure they are not clogged with debris.
  5. if your washer still doesn't work your fluid pump is probably the problem.

Sep 28, 2013 | 1999 GMC Jimmy

3 Answers

My 2006 Dodge Dakota windshield washer fluid does not spray. I checked the washer pump and it works. The fuses are all good. And the wipers work. When I press the windshield washer button inside the truck...


If the pump works, something should be flowing thru the hose to the spray nozzles.
And if the pump works, everything electrical is working.
How do you know the pump works ?

Apr 14, 2013 | 2006 Dodge Dakota

3 Answers

My windshield washer motor in my 2003 Hyundai Sonata does not make any noise nor dispense any windshield washer fluid when I turn it on, but the wipers do engage


Is your wiper fluid level good?Look for leaks at pump,it's connected to container,also check your hoses leaving pump to windshield,could be loose or binding.

Dec 11, 2012 | Hyundai Motor 2003 Sonata

2 Answers

My windshield washer pump works,but no fluid on


Those little nubs on your hood or the spray jets on the wipers those spray jets need to be adjusted and be pointed up you can use a sewing needle just don't jam them or break them.

Jan 15, 2010 | 1995 Buick Regal

2 Answers

Windshield washer does not pump fluid


The pump works off the same circuit as the wipers, so it would be same fuse. Most likely the pump is no bad.

Jan 30, 2009 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
1999 Ford Mustang Cobra Logo

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

66126 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5363 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...