Question about 1996 Chevrolet Blazer

2 Answers

Whats the cost to repair the overdrive in a 96 chevy blazer

The car just turns over in overdrive when its in overdrive once u get up to 30 mph it starts to just like spin but it drives fine if its in second

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

About 1200 or more, unless you buy a used one and have a wrecking yard install it, be sure to buy a warranty and ask how many miles the transmission has on it that they are selling you. Cheapest way I know unless you have a man to put it in for you..LOL

Posted on Dec 18, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 36 Answers

Trans needs to be rebuilt. I just had one rebuilt for a 2000 chev pickup $2000 

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 Chevy Blazer 4 door I've change the ignition switch starter all that good old stuff if I turn the key and jumper by the starter it will run I have liked it just no crank no start


1989 Chevy blazer 4.3 won't start..I have ... - CarGurus

www.cargurus.com > Questions > Chevrolet > BlazerCarGurusJan 30, 2013 - 96 Chevy S10 Blazer with 4.3 L engine vortex will turn over but won'tstart. ... i a 93 k5 blazer 5.7tbi in cold weather it will not start, if i hook jumper ... was told it just needed a Fuel pump, I replaced the Fuel pump, and the Filter, ...

Oct 12, 2015 | Cars & Trucks

2 Answers

How can I get a free chilton repair manuel for a 2002 Chevy S10 Blazer


Chilton and Haynes books are never free. You may get lucky and find a used one for a decent price. Your best bet may be to go online at "alldatadiy.com". This will cost about $30 a year but it is very vehicle specific. You input the year,make ,model, engine and transmission and they provide detailed repair instructions complete with diagrams.

Sep 14, 2014 | 2002 Chevrolet Blazer

1 Answer

Chevy C1500 4.3 liter


If you mean the engine starts running rough at say 40 or 50 mph, once you go into overdrive the engine is working very hard and any weak component can show up. Could be spark plugs or other factors.
If the check engine light is on you need to have the computer checked for trouble codes to help narrow down the options.

May 09, 2013 | 2000 Chevrolet Express Cargo

1 Answer

Transmission relay and wby will it not go over 30 mph. 2004 Chevy trail blazer


transmission slipping,check transmission fluid level.if been long while.try doing a transmission fluid filter change.

Dec 02, 2012 | Cars & Trucks

1 Answer

Rides loud once you get up to 20 mph sounds like grinding on front passenger side


perform this test, SAFELY! while driving at 20-30 mph lightly pull steering wheel to left, then to right, if sound worsens, then gets better in the other direction, I believe you have a wheel bearing problem. this will be a hub bearing assembly, and is not a difficult repair.

DW Mylin

Nov 27, 2012 | 2002 Chevrolet Blazer

1 Answer

Where the relay switch for over drive on the transmission II think thats whats getting stuck or not funtioning right?96 olds regency


Despite the overdrive icon and manufacturers calling it overdrive, there is no overdrive unit on your Oldsmobile. What is mistakenly referred to as an overdrive unit is the lock up torque converter. Over a certain speed (usually about 35 mph), and absent a call for heavy acceleration, the torgue converter is hydraulically locked so that the drive and driven vanes in the converter spin as a single unit. The lock-up is controlled by a solenoid valve in the side pan of the transmission. The most common problem with the solenoids is that they fail to release and keep the converter locked up which stalls the engine at stops. The usual cure is to replace the solonoid

Jul 24, 2011 | 1996 Oldsmobile Ninety Eight Regency

4 Answers

96 chevy blazer 3rd gear and overdrive slipping


i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do

Jun 30, 2009 | 1996 Chevrolet Blazer

2 Answers

97 s10 blazer cuts out and loses power while driving.


Had the same problem with by 1998 S10 a couple years ago. Changed fuel filter?? didn't work. Changed the fuel pump?? didn't work. Changed the fuel pressure regulator?? didn't work.

I was about to the end of my rope when I put a timing light on it and it showed firing on cylinders more then once a cycle. Turns out my distributor cap was bad and spark was jumping between contacts. When a spark is spread out over more then one cylinder, it doesn't fire correctly and that is causing it to bog out. Simple and a lot cheaper then all the other fixes I tried. Crank sensor was my next option though.

Feb 01, 2009 | 1997 Chevrolet Blazer

1 Answer

I was wanting to know if u could tell me how much it would cost to repair the overdrive in a 96 chevy blazer?


It,s expensive i beleive it,s a 700r4 transmission about $900 is a cheap figure some shops charge more it,s a complete rebuild.Usually the reverse will go out at the same time.

Dec 18, 2008 | 1996 Chevrolet Blazer

1 Answer

I have a 98 chevy blazer and the front end makes a grinding noise every once and a while and there is a wobble until you get it up to about 30 mph.


Sounds like you are losing a wheel bearing. PARK IT!! until you have a mechanic diagnose it. If you lose a wheel assembly while driving, you could get dead quick!

Dec 16, 2008 | 1989 Chevrolet C1500

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63572 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...