Question about 1988 Jaguar XJ6

1 Answer

Replacing a thermostat in a 1988 xj6

I need to replace in a 88xj6

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 286 Answers

Hi Ray

It is in the housing below the engine coolant filler cap, at the inlet manifold.
You will have to remove the top hose, and slacken bypass hose to the water pump, and remove the 2 bleed hoses on top.
There are 2 bolts and a, stud that secure the housing, take care with the bolts they sometimes snap in the inlet manifold, bearing that its 2Oyrs old now,
You will need to replace the gasket on the housing along with the thermostat.
I see you posted this on the 18th Dec, so maybe you know all this by now ?
Good Luck !
John.

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the fuel filter on 1988 jaquar xj6 and the front fuelline on the filter is leaking


if its a threded type tighten it if clip type seal may have not sealed correctly

Oct 01, 2014 | 1988 Jaguar XJ6

1 Answer

1988 xj6, no heat no air no blowers NOTHING. will not turn on at all.replaced swtch board in dash still nothing.


jags suffer with condensation and water comming in to the front compartment and the blower motor seize up remove and check and also checc the drain holes in bulkhead , also if it was a s/h control panel is it ok ??

Dec 30, 2013 | 1988 Jaguar XJ6

1 Answer

What does the code fuel falure 2 mean on my 1988 jaguar xj6


THE COSE MEANS YOU PUT THE WRONG FIRING ORDER ON THE CAP OR THE SPACE BETWEEN THE SPARK PLUGS ARE WRONGTHE FIRING ORDER IS 153624 AND THE SPACE BETWEEN THE SPARK PLUGS IS .035

Jan 26, 2013 | 1988 Jaguar XJ6

1 Answer

How do I reset the computer on 1988 xj6 jaguar


TO RESET ECM ON A 1988 XJ6 JAGUAR.YOU DISCONNECT NEGATIVE BATTERY CABLE FOR 30 SECONDS TO CLEAR CODE.THIS WONT DO ANY GOOD IF YOU HAVE A ECM TROUBLE CODE DONT FIX PROBLEM.CHECK ENGINE LIGHT WILL STAY ON, UNTIL YOU FIX FAULTY COMPONENT OR SENSOR.

Sep 14, 2010 | 1988 Jaguar XJ6

2 Answers

What does fuel failure 4 mean on 1988 jaguar xj6


That means there is a problem with the oxygen sensor that is fitted in the exhaust

Feb 28, 2010 | 1988 Jaguar XJ6

1 Answer

1994 XJ6 hard start problem


Check Air Flow meter/Sensor

Jul 08, 2009 | 1988 Jaguar XJ6

2 Answers

LOW BREAK PRASSURE HARD PEDAL


master cylinder needs to be rebuilt or replaced

Jun 25, 2009 | 1988 Jaguar XJ6

1 Answer

Heater problem in Jag 1988 XJ6


Hi
Did you check the vacuum to the new heater control valve, they usually give trouble.
Fuse for fog lamps will have nothing to do with the heater system.
Good Luck!
John.

Jan 03, 2009 | 1988 Jaguar XJ6

1 Answer

Need to know heater motor location and how to replace


to get to it you will need to remove your glove box. I should be obvious how to get it out from there.

Dec 31, 2008 | 1988 Jaguar XJ6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Raygin
Raygin

Level 2 Expert

322 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...