Question about 1995 Pontiac Bonneville

1 Answer

Unplug wiring harness

I am replacing the ignition switch on a 95 pontiac bonneville, but i cannot unplug the wiring harness from the ignition

Posted by on

  • yadayada
    yadayada May 11, 2010

    I don't understand, WHY can't u unplug it?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

There are usually clips holding it in.... and from doing my windstar.... it is an extremely tight fit... i believe i had to use a screw driver to pry it looks... make sure the battery is unhooked when you do that

Robert

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a 12 volt switched power supply for my sirius radio, where cani find a wire i can hook into?


Check the large wires coming down the steering column from the ignition switch. Use a test light and find one that illuminates the test light with the key in the on position.

Feb 15, 2016 | 2005 Pontiac Bonneville SE

1 Answer

Changed spark plugs, car turns over but wont start


Double check to make sure you didn't accidentally unplug and censors on the harness. Also check your fuses. for you ignition.

Nov 07, 2013 | 2000 Pontiac Bonneville

1 Answer

I have a 95 pontiac bonneville ssei and the tail lights dash lights and turn signals were not working. i replaced the headlight switch and a fuse and my tail lights and dash lights come on now, but when i...


you have a dead short in the wiring harness. Easiest way to diagnose is remove tail/parking bulbs and systematically replace them one at a time. When you replace them, not buy new ones just unplug them, your problem circuit will be when the lamps go dim. That's your short.

Let me know how it goes!

P.s. is the 666 because of the 3 b's in bobbie? Carefull, one's irthday is 12,22,12 may get upset. lol

Feb 01, 2010 | 1995 Pontiac Bonneville

1 Answer

How i cant see a picture of ignition control module of pontiac bonneville '95


you can see yours if you trace the spark plug wires to the coils. The ignition module is under the coils

Jan 31, 2010 | 1995 Pontiac Bonneville

1 Answer

How do I replace headlight switch in my 95 Pontiac Bonneville


assuming that u have replaced any bad fuses. you have to remove the cover around the instrument panel. then u need to have a socket small enough to remove the screws that hold the head light switch in place. the head light switch knob should come out. you may have to pull it out first before u take the cover off. then remove the old switch and disconect the wires then replace the switch. i hope this helps

Oct 03, 2009 | 1995 Pontiac Bonneville

1 Answer

95 bonneville the ignition switch locked up completely so i changed the cylinder on it and when i almost had it back together i noticed that the key wasnt going all the way back to the lock position but it...


The item at the end of the rod is the ignition switch. what you changed was the lock assembly. (you turn the key, it moves the rod and puts the switch in the correct position to do what you want it to)

Jun 08, 2009 | 1995 Pontiac Bonneville

1 Answer

'95 Pontiac Bonneville won't turn over


is the battery good.is the starter turning the engine.

Sep 11, 2008 | 1995 Pontiac Bonneville

1 Answer

Security light flashing, does not turn over, do i replace ignition or ecm or both? Do i need new key if i replace ignition?


Chances are the wire going to ignition broke allowing the security to start flashing.this will keep the
car from cranking.On my 93 bonneville I went to Radioshack and got a 680 ohm resister,cut the 2 small
yellow wires on lower steering column under dash,soldered resister to the 2 yellow wires coming from harness.Cost of repair..$1. you can read the resistance on the key by using ohm meter on each
side of chip in key

Jul 30, 2008 | 1997 Pontiac Bonneville

1 Answer

2000 pontiac bonneville wiring harness


u can get one to use out of a srvice book at the libruary

Jun 14, 2008 | 2000 Pontiac Bonneville

3 Answers

Stumped can get this car to start


if its auto check inhibitor switch also check ignition switch and all fuses

May 26, 2008 | 1995 Pontiac Bonneville

Not finding what you are looking for?
1995 Pontiac Bonneville Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...