SOURCE: locating the iat sensor on a chevy tahoe 2008
Yes. That is exactly it. The Air Intake Temp Sensor is built into the Mass Air Flow Sensor on the Air Filter Box. Below is a picture...
I personally have not connected one of these Chips to a Tahoe...What I can provide you with, is the Connector Diagram so you know exactly what Wires you need to Splice in to. See below...
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesisitate to ask...Thanks again, JShreader.
SOURCE: wire colors for my IAT sensor
red with blue stripe and black... cut the red with blue strip and connect one end of the resistor to the harness side. Then splice the other end of the resistor to the black wire... do not cut it just splice into it.
SOURCE: wHERE IS THE iat SENSOR ON A 2008 DODGE RAM 1500,4.7L V8
on the intake manifold passenger side near the front i think
245 views
Usually answered in minutes!
×