Cant get key out of ignigtion

there is a retaining pin that you have to move out of the way for the barrel to slide in

HUH ?

try taking in and out of park several time fast if its not going into park all the way it will get stuck

no
go to an accredited service center ot have the fault codes read
most likley an immobilizer problem

Hi....
On your question.
Put the KEY in the Passanger door lock cylinder and turn.
If stop Flash will start ok.
If Not Do de same in the Rear Gate door.
It will deactivate the Factory Alarm.

I hope this help on your question.

Sound like the key barrel is broken, remove the swith from the back of the ignigtion and check the barrel.

Try vigoursly shaking the wheel left to right right to left whilst turing the key, may have just jammed

The steering wheel lock is a metal prong that protrudes into the steering shaft from within the ignition lock assembly, that is held on by two security screws pointing upward underneath the plastic steering column covers. You can remove the 2 screws and check out the working of the mechanism. It's probably stuck. Most likely, when you put on the new steering wheel, you simply twisted the ignition assembly and it is now causing the steering lock to be wedged on in the lock channel. Try twisting it back the other direction with your hands and I'm pretty sure it will allow the spring loaded locking mechanism to release. This same problem happened to me and took me a while to troubleshoot what was going on in the mechanism and figure it out. If twisting it both directions and checking to see if it releases with the key turned doesn't fix it, just remove the ignition assembly and lubricate the locking mechanism bolt and that will fix it for sure.

replace selenoid