Question about 1999 Chevrolet Blazer
I put my 99 chevy s-10 blazer from 2 hi to 4 low this morning to get out due to bad weather, when i got to the highway i put blazer in neutral and pushed 2 hi button and the button would not push in or move at all. so i pushed from 2 low which it was currently in and tried 4 hi and it went into that fine, but will not go from 4 hi/low into 2wd at all?
You could have a split vaccume line goin to the actuater switch that operats the 4 wheel drive under neath the battery box.
Posted on Jan 09, 2009
I have worked in GM dealership. The first thing we would do as inexpensive normal maintenance is change transfer case fluid. Once it is changed drive it until warm taking turns. Then drain it again and refill. This type of flush usually helped with any tarnish. It helped because four low is rarely used.
Posted on May 12, 2015
Most likely a bad encoder motor. These were very common problems on the S series trucks. Unfortunatly not a cheap fix either. Usually around $450 - $550, more at a dealer.
Posted on Jan 03, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 14, 2017 | 1999 Chevrolet Blazer
Jan 31, 2014 | Cars & Trucks
Oct 29, 2009 | 1998 Chevrolet Blazer
Oct 03, 2009 | 1989 Chevrolet S-10 Blazer
Jul 19, 2009 | 1999 Chevrolet Blazer
Jun 23, 2009 | 1991 Chevrolet S-10 Blazer
Mar 02, 2009 | 1986 Chevrolet S-10 Blazer
Jan 26, 2009 | 1997 Chevrolet Blazer
Dec 31, 2008 | 1994 Chevrolet S-10 Blazer
536 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: