Question about 1986 Ford Bronco

1 Answer

Transmission repair manual for 1986 ford bronco needed

Where do I find a parts list/repair manual for the bronco? the tranny is laying on the ground and I can't find a part identifier/list for it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Theres a couple places you could look, a haynes book for the ford bronco gives great detail on removal, repair, and installation of the transmission, and can be found at autozones or even bookstores.

Posted on May 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a free manual, to reuild a automatic transmission in a 1986 ford bronco 2 w/2.9l. and how to remove and rebuild,doing this myself. any step by step manuals for this beginner?


The info is in the factory repair manuals, we do not have them because they are copy protected by Ford. You can buy the factory manuals here used for a very reasonable price. You will need many special tools as well.

Oct 24, 2012 | 1986 Ford Bronco II

Tip

Speed sensor issue.


I have A 1995 Bronco XLT that had A problem with harsh shifts and seemed to be running in "limp mode". I have had other trucks and cars with these symptoms and the fix was A new speed sensor.
The bronco had no speed sensor on the tranny like my F-150 (also A 1995) although there was one listed for it at the auto parts store. After many days of messing with this heap I bit the bullet and took it to A transmission shop where they tried rewiring the dash. After spending $350.00 it worked for about 6 months when the symptoms returned. The original tranny shop wanted nothing to do with this boat so I took it to A Ford dealer and found out that the speed sensor is built into the instrument cluster which must be removed and replaced with A rebuilt or A new unit.
A new one was in excess of $1000.00 while rebuilding mine was around $600.00. I opted to rebuild my unit. The total for this came to almost $1500.00 to remove and replace the rebuilt cluster. But at least it now runs right.
Another better idea from Ford! Instead of an external,tranny mounted speed sensor that costs around 35 bucks, and can be replaced by the average shade tree mechanic, lets bury it in the dash and charge more than the truck is worth to repair it! And they wonder why the foreign auto makers are eating there lunch.

on Jul 06, 2008 | 1995 Ford Bronco

1 Answer

I am looking to replace the tranny in my 1986 bronco 2. what other bronco 2 year models will fit?


well first off which tranny do you have?? if the vin code is T it is automatic-A4LD, which was used in the years of 1984-1990 if you have a manual tranny then it might be one of these two.. toyo koygo tk5 vin code is 5 which was used in the years of 1985-1987, they also used a mitsubishi FM145 vin code D in the years of 1985-1987 hope that helps..

Nov 16, 2010 | 1986 Ford Bronco II

1 Answer

I need to know how to remove the transmission on a 1986 ford bronco 2


That is not a job, to do in your driveway,certainly not as winter approaches

Remove transfer case first,then trans.

Need a floor jack and at least one helper.

You could get hurt real easy,those parts are so heavy, you need two people to put trans on the bench

Nov 07, 2010 | 1986 Ford Bronco II

1 Answer

When i put my 1986 bronco 2 in any gear it only goes forward in any gear even reverse and you have to rev it up to 4 grand before it moves


Hi!!
This transmission have band adjustments, your best bet is to get a $15 Haynes Repair Manual for your vehicle, on the Transmission Section, you'll find step by step instructions. Don't even have to remove anything. all it's done on the side of the tranny.
Good Luck!! Don't forget to rate this post!!

Sep 22, 2010 | 1986 Ford Bronco II

1 Answer

1986 Ford Bronco Dash/Instrument Light Problem


"painless wiring kit" maybe available for your application. sometimes not so "painless" though

Apr 11, 2010 | 1986 Ford Bronco

1 Answer

Transmission fluid leaking back, 1988 Ford Bronco


your output seal on the tranny or input seal on your transfer case is bad. you have to pull your transfer case to tell. this is a pretty straight forward job. block wheels. put transfer case in neutral. drop front and rear drive lines.diconnect transfer case shift linkage. there is a short commponent connecting the trans to the transfer case. the bolt on either end face each other. remove the bolts to the transmission. the transfer case is heavier than it looks, i suggest getting help. pull back on the transfer case until it will drop down. it will pull out a bit because of the trans output shaft. replace what will probibly turn out to be the tranny output shaft seal and reassemble in reverse order.

Nov 06, 2009 | 1988 Ford Bronco II

1 Answer

I have an 86 ford bronco II. Ive been driving around with the tranny not going into 4th gear. Today I was driving and the tranny started to completely slip into 3rd gear, almost like going into neutral....


I would have to say no,there is nothing else you can do now. Does the fluid smell burned? Is it discoloured? If it is ok now after the top up and additive ,consider your self lucky.

Sep 30, 2009 | 1986 Ford Bronco II

1 Answer

Need a repair manual for a 1986 bronco transmission


U should have no trouble finding one.

Dec 17, 2008 | 1986 Ford Bronco

1 Answer

Tranny


try changing the transmission filter once they get clogged they will act like that.

Jun 02, 2008 | 1986 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...