Question about 1991 Dodge Spirit

1 Answer

Replaced motor and checked fuse wipers still dont work

I do not know where the wiper relay is or how to tell if its not working

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 66 Answers

Left inner fender under hood there should be three other relays next to it smack the relay with screwdriver with wipers turned on should start working

Posted on Dec 17, 2008

  • tom purcell Dec 17, 2008

    also ck your wiper switch for power

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My f250 2003 wipers and pump dont work iv replaced switch and wiper moter fuses are good the 2 i could locate for wipers


Have you done a Probe Test on the vehicle? A Probe Light Tester can help you locate a short in your cars electrical system. To learn what a Probe Tester is and How to use it, watch the following video: https://www.youtube.com/watch?v=tXzKcEyIOq8

Dec 22, 2015 | Cars & Trucks

3 Answers

Its a 1997 montero sport


it could be the actual motor burnt out or siezed wich is causing the fuses to blow and the motor is under the bonet just below the windowscreen near the top vents.

Jul 25, 2008 | 2000 Mitsubishi Montero Sport

3 Answers

2004 Hyundai Sonota - both wipers stopped working - Is it really the wiper transmission or could it be a fuse?


if its the transmission you would still hear some noise coming from it. if that's not the case then go after fuses and wiper relay.

Mar 02, 2015 | Hyundai Cars & Trucks

1 Answer

Wipers dont come on at all


raise the hood , turn on your wipers to verify if your wiper motor is even working if not check wiper motor relay fuse if fuse is blown replace and try again. could also be that the plasitic bushing that connects the wiper arms to the wiper motor is worn and has seperated

Feb 24, 2011 | Dodge Caravan Cars & Trucks

3 Answers

Front wipers will not operate. checked fuse and relay look ok. back wiper works


Here are a few other things to check beside the fuse and relay:

Check Wiper Motor - the wiper motor is the driving force of the windshield wiper. Feel the motor and listen to a humming sound. If there is no humming, the motor is the problem. Check if the motor is working properly and see to it that its electrical connections are made properly. If you find that the motor is dead and beyond repair, get it replaced immediately.

Check For Break in Connecting Wires - the connecting wires of the motor sometimes go loose and that may cause the windshield wipers to stop working. Also check the battery plug connection which the motor has. Connecting the loose wires properly or fixing/replacing the plug might solve your problem.

Check Wiper Switch - another wiper assembly part that can malfunction is the wiper switch itself. Check for switch malfunction and if you find that is indeed the problem, get it replaced from a mechanic.

Check for Bent Wiper Arms - bent wiper arms can cause the operation of the wipers to be hampered. If the wiper arms are bent beyond repair, get them replaced immediately.

Nov 25, 2010 | 2003 Isuzu Ascender

2 Answers

Front windshild wiper is not working but back ones are. what is my problem?


The fuse could be blown, or the motor could be bad, or the switch may be bad, or the wiring in between.

Oct 12, 2010 | 2001 Ford Windstar

1 Answer

Windshild wipers stop working


CHECK FUSE IF FUSE GOOD.HOOK A JUMPER WIRE TO GROUND AND GROUND WIPER MOTOR.TURN WIPER SWITCH ON IF WIPERS WORKS YOU HAVE TO FIX GROUND CONNECTION. IF WIPER STILL DONT WORK.REMOVE THE COWL COVER.TURN WIPER SWITCH ON TO SEE IF POWER GOING TO WIPER MOTOR IF YES.REMOVE WIPER MOTOR HOTWIRE IT.IF WIPER MOTOR DONT WORK REPLACE IT.IF WIPER MOTOR DO WORK CHECK FOR BINDING OR DAMAGE LINKAGES.IF POWER NOT GOING TO WIPER MOTOR AND FUSE GOOD.WIPER SWITCH FAULTY OR IT HAS BROKEN WIRE FROM SWITCH TO WIPER MOTOR.

Oct 04, 2010 | 2002 Toyota Avalon

3 Answers

Windshield wipers stopped working not fuse is there a relay and where is it


with the key on and the wiper switch in the low or high position tap the wiper motor with a screwdriver handle. If it starts working replace the wiper motor.

Sep 26, 2010 | 2002 Buick Rendezvous

1 Answer

Wiper blades stopped working on 2000 Taurus


  • Central junction box (CJB) Fuse 211 (15A), Fuse 215 (30A)
  • Multifunction switch
  • Wiper run/park relay
  • Wiper high/low relay
  • Windshield wiper motor
  • Circuitry
  • Battery junction box (BJB)
  • CJB
  • Generic electronic module (GEM)
-------------------------
42c55af.gif

Apr 09, 2009 | 2000 Ford Taurus

2 Answers

The windshield wipers do not work on my Jaguar XJR 2002. Could be the fuse but i do not know which fuse it is as i do not have an owners manual. Maybe the motor is bad, but I wanted to check the fuse...


I have a 1999 XJ8. Same setup as yours, with very minor differences. I had the same problem, turned out NOT to be fuse, OR bad relays, OR wiper motor, OR Body Processor Module. It was simply a loose connection at the body processor module below the Glovebox. I Literally jiggled the wires, and it started working again, and has been ever since. I have the Shop Manual, Technical ability, and Tools available to test all of the circuits involved, and went forth with printing out the wiring diagrams, and step by step eliminated each, until I decided to give the connection a jiggle, JUST BEFORE replacing the Body Processor Module (which would have been expensive)

Test 1:
Try the jiggle trick. Should be able to access harness just below, and behind the left of the glovebox. touch around up there, but don't be a brute, as you MAY break stuff.

Test 2:
Check Fuse under hood, (#22) Should be a 30A fuse

Test 3:
Swap the relays located on the drivers side, just behind the radiator. One is for Wiper motor run, the other is for wiper motor high speed.

Test 4: Jumper Pin 3 & 5 on the LEFT relay (drivers left) (please remove relay first). This should turn the wipers on, regardless of whether or not the computer is telling it to run. If wiper does not turn on, check fuse, or replace wiper motor.

That's all I've got.... Hopefully this works for you.

Feb 22, 2009 | 2004 Jaguar XJR-Series

Not finding what you are looking for?
1991 Dodge Spirit Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...