Question about 1994 Isuzu Rodeo

1 Answer

Automatic Transmission stuck in 3rd gear; curious warning lights

This all happened simultaneously. Start the Rodeo and I see BRAKE and REAR ANTI-LOCK warning lights (parking brake off). I put the gear selector in DRIVE and the transmission is in third gear. I can manually select 1st, 2nd and third and it will follow through the gears. If I go one step further and put it in 4th it never shifts out of 3rd. Also the lights that illuminate when I select the POWER or WINTER mode do not come on and there is no affect in either mode. HELP!!!!

Posted by on

  • Anonymous Mar 14, 2014

    I have a 2000 xterra, 4x4, automatic trans, it wont go into 3rd gear. you put the car into selection drive (D) It start out fine by going first(1st) and second (2nd)gear no problem but wont up shift into third (3rd) gears, the more you push the gas the more it revs in second gear and just wont come out of second gear. It will down shift to first gear tho.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 66 Answers

Ck ciggeret lighter fuse if it blows makes trans do funny things same with honda passport or trans controler going bad lighter fuse controls trans controler

Posted on Dec 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't 98 Buick century shift into any gear?


is it a linkage issue? if the shift lever is working and you can feel the detents, check your fluid make sure it is full and clean, if not you could have internal issues with the trans

Oct 30, 2015 | Buick Cars & Trucks

Tip

My car is stuck in gear.


Hi.

If we are talking about automatic transmission stuck in park position, then the problem is the solenoid switch that unlocks the gear shift lever when brake pedal is pressed. The switch is located behind the brake pedal.
When the problem is the solenoid the brake lights usually do not work.
A definitive test on the switch is done by jumping the switch contacts to bypass the brake pedal switch.

If the brake pedal switch is not the problem, or if an automatic transmission is stuck in a different gear, then the first step in troubleshooting is scanning the ECU (car computer) for codes. If there is a code P0700 stored, that means that more codes are stored in the TCM (transmission control module). The TCM is the computer module controlling the transaxle, and can be tested at any authorized garage. See: I get code p0700 after an OBDII scan.
There are many possible reasons for automatic transmission malfunctions. Most common reasons (that can also cause lock in one gear) are discussed here:My car does not shift in second gear.
If you are lock in park, check the pedal switch and brake lights as a first thing.

If you have a manual transmission stuck in any gear, it is usually the gear shaft broken or detached from the hub. In that case the gear shaft must be replaced.

on May 25, 2010 | 2007 Mercedes-Benz C230 Sedan

1 Answer

No indicators working found fuse box which fuse?


When you are talking about "indicators" we could assuming that your are refer about signal lights. This work with "flashers" devices.

For 1996 Audi A4 2.8L SFI 6cyl the Flasher is located in front seating area, driver side, under dash, behind dash lower panel, mounted above driver side of steering column.

About generic fuses, open the driver side door. Remove panel on left side of dash. Fuse box is behind panel:

Fuse # / Description / Amps
1 / Heated washer jets / 5
2 / Turn signals flasher unit / 10
3 / Headlight washer, illumination of glove compartment, engine compartment, climate control, automatic transmission, instrument cluster / 5
4 / License plate light / 5
5 / Instrument cluster, seat heating, test connection for cruise control, bulb monitor for auto-check control, Automatic transmission display, switch lighting, mirror switches and actuators, airbag warning light, outside temperature indicator, Climate control / 10
6 / Central locking system / 5
7 / Anti-lock brake system / 10
8 / Vacant
9 / Mirror heating / 10
10 / Vacant
11 / Cruise control (automatic transmission) / 5
12 / On board diagnostic system / 10
13 / Brake lights / 10
14 / Interior lights, reading lights, anti-theft alarm system, vanity mirror / 10
15 / Instrument cluster, power windows, climate control, automatic transmission / 10
16 / Anti-lock brake system, Anti-Slip-Regulation / 5
17 / Heated door locks / 10
18 / High beam right / 10
19 / High beam left / 10
20 / Low beam right / 15
21 / Low beam left / 15
22 / Tail and side marker right / 5
23 / Tail and side marker left / 5
24 / Wiper and washer system / 25
25 / Blower for heating, climate control / 30
26 / Rear window defogger, mirror heating / 30
27 / Rear window wiper / 15
28 / Fuel pump / 15
29 / Engine timing / 20
30 / Sun roof / 20
31 / Tail lights, cruise control, automatic transmission / 15
32 / Engine timing / 20
33 / Cigarette lighter / 15
34 / Engine timing / 15
35 / Trailer receptacle / 30
36 / Fog lights / 15
37 / Radio / 20
38 / Luggage compartment light, central locking system / 15
39 / Emergency flasher / 15
40 / Horn / 25
41 / Anti-lock brake system / 25
42 / Vacant
43 / Vacant
44 / Seat heating / 30

Hope this helps (remember to rate and comme this free answeer).



Jun 16, 2011 | 1996 Audi A4

2 Answers

Fuel Pump Fuse Number for a 1998 audi a4 2.8 quattro


Fuses: Fuse arrangement in fuse panel, behind instrument cluster, left
Fuse Arrangement In Fuse Panel 62624464

1 - Heated washer jets 5A 2 - Turn signals 10A 3 - Headlight washer (relay), illumination for glove
compartment, climate control, Automatic Transmission, instrument cluster 5A 4 - License plate light 5A 5 - Instrument cluster, seat heating, test connection
for cruise control, bulb monitor for auto-check display, Automatic Transmission display, switch
lighting, mirror switches and actuators, airbag
warning light, outside temperature indicator,
climate control 10A 6 - Central locking system 5A 7 - Anti-lock brake system (ABS) 10A 8 - Vacant 9 - Mirror heating 10A 10 - Vacant 11 - Cruise control (Automatic Transmission) 5A 12 - On board diagnostic system 10A 13 - Brake lights 10A 14 - Interior lights, reading lights, anti-theft alarm system, vanity mirror 10A 15 - Instrument cluster, power windows, climate control, automatic transmission 10A 16 - Anti-lock brake system (ABS), Anti-Slip Regulation (ASR) 5A 17 - Heated door locks 10A 18 - High-beam, right 10A 19 - High-beam, left 10A 20 - Low-beam, right 15A 21 - Low-beam, left 15A 22 - Side marker and tail light, right 5A 23 - Side marker and tail light, left 5A 24 - Wiper and washer system 25A 25 - Blower for heating, climate control 30A 26 - Rear window defogger, mirror heating 30A 27 - Rear window wiper 15A 28 - Fuel Pump 15A 29 - Engine timing 30A 30 - Sun roof 20A 31 - Tail lights, cruise control, automatic transmission 15A 32 - Engine timing 20A 33 - Cigarette lighter 15A 34 - Engine timing 15A 35 - Trailer recptacle 30A 36 - Fog lights 15A 37 - Radio 20A 38 - Luggage compartment light, central locking system 15A 39 - Emergency flasher system 15A 40 - Horn 25A 41 - Anti-lock brake system (ABS) 25A 42 - Vacant 43 - Vacant

Apr 05, 2010 | 1998 Audi A4

1 Answer

Rear Anti Lock & Brake indicator lights come on


There is a sensor on top of rearend housing. Remove it and clean off the debris (will be fine metallic particles)-replace sensor-reset the computer (disconnect battery power for a few moments-reconnect battery-you're done. If this does not work-you'll have to replace the sensor.

Feb 23, 2010 | 1995 Isuzu Rodeo

1 Answer

Does the 1992 dodge dakota automatic trans have a fuse to overdrive button


The fuse number is

#16 - 5 Amp (Tan)

Gauges & Indicator Lights: Low Oil Light, Low Washer Light, Service Reminder Light, Transmission Oil Light, Brake Warning Light, Anti-Lock Brake Warning Light, Fuel Pacer Light, 4WD Indicator Light, Malfunction Indicator Light, Warning Buzzer, Overdrive Switch (1992-93); Transmission Oil Temperature Lamp, 4WD Lamp, Overdrive Module Seat Belt Warning Buzzer
(1994-95).

Jan 25, 2010 | 1992 Dodge Dakota

3 Answers

My 2001 chevy blazer wont shift gears. A machanic told me it's the rear end? What's that?


The term 'Rear End' when used with a vehicle, is a slang term for Rear Differential. Your engine turns the transmission, which in turn turns a driveshaft, finally turning the rear differential. The gears inside the differential turn axles, and your rear wheels are connected to these axles.

These two link explain the basics of a differential,
http://www.drivingfast.net/technology/Differentials.htm

http://auto.howstuffworks.com/differential.htm

The rear differential, has Nothing to do with why your transmission won't shift. Manual or Automatic. I suggest you find a competent shop, and leave That One Alone!

Jul 25, 2009 | 2001 Chevrolet Blazer

1 Answer

Problem with my cruise control and ABS light on 03 Explorer


Anti-Lock Control —Vehicles Built After 03/2002 The 3-channel anti-lock brake system consists of the following components:
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • Anti-lock brake control module (ECU)
  • rear wheel speed sensor
  • rear wheel speed sensor rings
  • yellow anti-lock brake warning indicator
The 4-channel anti-lock brake system with traction control and stability assist system consists of the following components:
  • active brake booster with integral solenoid
  • brake booster release switch
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • stability assist module (ECU)
  • stability assist event indicator
  • lateral accelerometer
  • longitudinal accelerometer (4x4)
  • rear wheel speed sensors
  • rear wheel speed sensor rings
  • steering wheel position sensor
  • yaw rate sensor
  • yellow anti-lock brake warning indicator
  • brake pressure transducer
  • traction control switch
---------------------------------------------------------------------
I suspect the abs issue is causing the speed control not to work if it happened at the same time the cruise control stopped working. When the yellow ABS light comes on, it means the ABS is dactivated. You may have a faulty accelerometer which senses acceleration and yaw (side to side lean). I have not seen a bad one but you said it is sensitive to acceleration.
I would unplug it and see what happens. The connector should have a small tab to depress so you can pull the connector out.
Here is where it is:

Accelerometer Removal and Installation
  1. NOTE: The accelerometer is located under the center, rear passenger seat carpet. (I think you have to remove seat for access).
    Cut the carpeting along the perforations.
  1. Disconnect the electrical connector.
  1. Remove the nuts and remove the accelerometer.
cd31596.gif
Have dealer hook up tester and pull fault codes if you can't find an easy solution.
Some background info
  • A malfunction in the anti-lock brake system will cause the anti-lock brake control module to shut off or inhibit the system. However, normal power-assisted braking remains.
  • Malfunctions are indicated by the yellow ABS warning indicator in the instrument cluster.
  • The anti-lock brake system is self-monitoring. When the ignition switch is turned to the RUN position, the anti-lock brake control module will carry out a preliminary self-check on the anti-lock electrical system indicated by a three-second illumination of the yellow ABS warning indicator in the instrument cluster.
  • During vehicle operation, including normal and anti-lock braking, the anti-lock brake control module monitors all electrical anti-lock functions and some hydraulic operations.
  • Each time the vehicle is driven, as soon as vehicle speed reaches approximately 20 km/h (12mph), the anti-lock brake control module turns on the pump motor for approximately one-half second. At this time, a mechanical noise may be heard. This is a normal function of the self-check by the anti-lock brake control module.
  • Pedal pulsation coupled with noise while braking on loose gravel, bumps, wet or snowy roads is normal and indicates correct functioning of the anti-lock brake system.
  • Warning Lamp Indicator
    The anti-lock brake system (ABS) uses the yellow ABS warning indicator to alert the driver of a malfunctions in the ABS.
    The yellow ABS warning indicator will come on to warn the driver that the ABS has been turned off due to a symptom that exists in the ABS. Normal power assist braking remains but wheels can lock during a panic stop while the yellow ABS warning indicator is illuminated.

    -----------------------------------------
    Please report back, I am curious if that is what it is. Good luck

    Mar 03, 2009 | 2003 Ford Explorer

    2 Answers

    Anti lock brake light


    abs relay some times go bad

    Dec 05, 2008 | 1999 Oldsmobile Alero

    Not finding what you are looking for?
    1994 Isuzu Rodeo Logo

    1,137 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Isuzu Experts

    yadayada
    yadayada

    Level 3 Expert

    63990 Answers

    Steve Hurc
    Steve Hurc

    Level 3 Expert

    450 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21990 Answers

    Are you an Isuzu Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...