Question about 2001 Jeep Grand Cherokee

1 Answer

2001 jeep grand cherokee laredo

When i turn on the windshield wipers the lights come on, why is it doing this? i also need to replace the switch for the turn signals,they quit working first. could you tell me how and where i find the part to replace?

thanks

Posted by on

  • danette0469 Dec 18, 2008

    Thank you I will try this.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 41 Answers

The lights are designed to come on when you activate the wipers, this is because most often, state law dictates that you turn your lights on while driving in the rain, no matter the time of day.  This way you don't have to remember to turn them on. The turn signal switch is a multifunction switch which is comprised of the headlights, wipers, turn signals and all the other stuff that is controlled via the stalks and switches that are mounted on the steering column, you can check with your local auto parts store to see if they can get the assembly from an aftermarket source, this will be cheaper than the dealer.  Also you can check eBay for new and used ones.  Get a part number by calling the dealer about the part and see whats available online.  Also Chryslerpartsdirect.com is an online site that sells direct from the dealer but at a deep discount, the parts are mailed to you.  Best of luck!

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok my 2001 Grand Cherokee Laredo wont stay in park


Transmission sticks in reverse- won't go into park. - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...won-t-go-into-park
Jun 14, 2013 - 12 posts - ‎5 authors 2003 6 cyl 4x4 Grand Cherokee Laredo automatic- Occaionally, when shifting from REVERSE TO PARK, my Jeep will stay in reverse. Typically its ... '2001 WJ'4,0L'42RE'NV 242'380000 km'ECE Compliant' ??????????? ??? ...

2001 jeep grand Cherokee laredo - CarGurus

www.cargurus.com > Questions > Jeep > Grand Cherokee
CarGurusJan 27, 2014 - 2001 jeep grand Cherokee laredo - Just purchased a 2001 Jeep GrandCherokee Laredo and ... It starts in PARK sometimes and sometimes it won't and I have to start it in Neutral. ... Hatch shuts flush, but won't stay shut. help!

Oct 22, 2015 | Cars & Trucks

1 Answer

In my 1995 jeep grand cherokee laredo 4.0 inline 6 the windshield wipers do not work i have changed the fuses motor and switch and they still will not work what should i do


can you run 12 volts to the wiper motor to see if you have a bad switch and make sure motor has a ground to it lots of times they are mounted on rubber

Feb 27, 2014 | Jeep Cars & Trucks

1 Answer

How do you troubleshoot 2000 Jeep Grand Cherokee Laredo front wiper blade


Check your manual for wiper fuse & relays location.You can inspect fuses visually...hope this helps

Dec 29, 2012 | 2000 Jeep Grand Cherokee

2 Answers

1995 jeep grand Cherokee windshield wipers will not park at bottom and wiper delay wont work


your problem is the wiper motor its self,the park position in internal,you will need to replace the motor

Jan 19, 2010 | 1995 Jeep Grand Cherokee

1 Answer

How to install a brake light switch on a Grand Jeep Cherokee


Dont do it... It will take you bout 30 minutes to remove and replace it on the steering column

Dec 04, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Dash & Instrument panel lights


The whole dash bezel has to come off but are all the dash lights out? if so check the switch for dash lights on a 01 it is built into the turn signal handle I think check it to make sure it's not set to off for dash lights

Mar 09, 2009 | 2001 Jeep Grand Cherokee

1 Answer

How can I bypass my windshield washer from the turn signal knob


if you rigged up a seprate switch and it stoped woring all together it sounds like you need to replace the motor and the turn signal switch isnt that hard to do by yourself if your looking for cheap good luck and i hoped i helped

Jan 11, 2009 | 1993 Jeep Grand Cherokee

1 Answer

2000 Jeep Cherokee Windshield Washer


You have a motor for the front and rear washer. Check the fuses. If the intermitted wipers does not work, there is a relay under the dash near the steering colum that needs to be replaced.

Jan 01, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...