Question about 2000 Oldsmobile Intrigue

1 Answer

I have heat; however the blower doesn't work.

The LCD system works intemittently. I do not have the compass on the mirror working; and sometimes I do not have lights on my dash.

Posted by on

  • bstone1954 Jan 05, 2009

    My engine heats up but the heater display will not operate and blower will not come on. I checked the fuses, breakers and relays and they all seem ok. What do I do next?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have the same problem. It is intermittent which makes it difficult. It was off for a while, so I took the speedometer out which revealed a main wiring harness. I shook it and it started working again. I kept shaking it, and it wouldn't turn back off. Clearly a loose connection somewhere, maybe when it quits working again I can figure out what is really wrong. Hope this helps a little.

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Compass in the dash stop working


needs service.
the FSM covers this toy.

alldata.com read

or the real deal (FSM)
click jeep

https://www.techauthority.com/en-US/Pages/Home.aspx

RTM

Did you scan the PCM yet, if not why not, id bet there are errors there. like compass module not talking or?

Feb 24, 2015 | 2014 Jeep Grand Cherokee

1 Answer

My rear view mirror with temp and compass sometimes will not work. It will show all the digital shows up at once and not the temp, but sometimes it works ok. What can I do?


Does the compass work when the temperature goes out? If the compass still works then chances are that the ambient temp sensor is defective. Also, could be wiring to the sensor. If the compass goes out with the temperature then chances are the mirror itself is defective. Cheapest most common problem is the ambient temp sensor. It's behind the grill by the condenser at the front of the vehicle.

Aug 20, 2014 | 2003 Chevrolet Silverado 1500

1 Answer

Buick Park Ave Lighting/Electrical Problem


the common system problem look like the headlights switch
and cluster back bulbs .... remove front panel cluster and remove headlight switch look for burn wire or connector terminal. test light
fuses all
hope it helps

Mar 22, 2014 | 2001 Buick Park Avenue

1 Answer

Outback 2002 subaru - Rear view mirror foggy; stopped working


there is nothing the shop did the that caused this they do that because of the heat inside the car sitting out in the sun

Sep 26, 2009 | 2002 Subaru Outback

1 Answer

2005 impala has no dash lights at all,exeptthe


usually in the newer impalas the bcm (body control module) located under the dash on top of the emergency brake pedal

Feb 24, 2009 | 2003 Chevrolet Impala

2 Answers

Compass


Fuse no. 10 (7.5 amp) in the interior (dash) fuse panel.

Feb 06, 2009 | 1998 Ford Explorer

1 Answer

The rearview mirror on a 2001 Nissan Xterra.


It may be a fuse, but I think that all the dash lights are on the same fuse and if they work, then there is a bulb located inside the rear view that needs to be accessed to be replaced. I would check all fuses with key on and lights on, both sides with a test light, and if all read good then it'll be the bulb.

Jan 31, 2009 | 2001 Nissan Xterra

1 Answer

Interior rearview mirror anti-glare failure


Problem experienced w/2001 OB Wagon. The 'mirror' w/auto adjusting for anti-glare is actually an LCD. When they go 'murky' it is the LCD layers delaminating. Not repairable -- remove and replace.

Bob

Jul 24, 2008 | 2001 Subaru Forester

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

67912 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...