Question about 2001 Ford F350 Super Duty SuperCab

1 Answer

1999 ford 350 suoer duty over drive dont work what can I check

Over drive dont work

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I had same problem,, wiring at shift lever were it goes into column had to be fixed, was wore thru,,,

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1 1999-2004 super duty transfer case,will it work for a 1996 ford F-350 diesel king cab pickup,both are manual shift and both have front and back yokes married to the transfer case


if you look at the rear facing cover if the transfer case there is a round tin tag with numbers in the middle, like nvg263 which is new venture gear 263 model, or it will be np255 which is new process 255. just make sure to match numbers and whether it is electric or manual shift.

Aug 26, 2014 | Cars & Trucks

1 Answer

What fuse is for the door ajar on a ford f-350 super duty


http://www.f150online.com/forums/electrical-systems/193352-if-your-door-ajar-dome-light-staying-read-2.html

worked on my f-250

Aug 20, 2012 | Ford F-350 Cars & Trucks

2 Answers

What size torque bit to get brakes off? 1999 expedition


To front pads, tighten the caliper pins to 16-30 ft. lbs. (22-40 Nm) on 1997-98 F-250HD, F-350 and F-Super duty models. Tighten the caliper pins to 21-26 ft. lbs. (28-36 Nm) on the F-150, F-250, Expedition and Navigator. Tighten the caliper pins to 42 ft. lbs. (56 Nm) on the 1999-00 F-250SD, F-350 and F-Super Duty models.

To install the rear disc brake caliper onto the rear support bracket. Tighten the caliper retaining pins on the F-150, F-250, Expedition and Navigator to 20 ft. lbs. ( 27 Nm). Tighten the caliper retaining bolts on the 1999-00 F-Super Duty models to 27 ft. lbs. (36 Nm.)

Hope helps.

May 09, 2011 | 1999 Ford Expedition

1 Answer

Truck is equiped with a fuel shutoff switch it says to check manual, i did but is not listed where it says can u help me please ?


Hi, here is what I have. Indication is in the driver's side pillar.

The inertia switch is located behind the passenger side kick panel on the F-150, F-250, Expedition, Navigator and 1999-00 F-Super Duty models. On 1997-98 F-250HD, F-350 and F-Super Duty models, the switch is located behind the driver's side kick panel.


RESETTING THE SWITCH

jturcotte_392.jpg

Fig. Fig. 1 The inertia switch reset button is located on the top of the switch

Apr 02, 2011 | 1999 Ford Super Duty F 450

1 Answer

I currently own a winnebago class C motor home. It has a 2001 suoer duty 450 ford engine. I discovered that none of the lights are working. How can I find out if a fuse is blown and which fuse would it be?...


You will need a 12 volt test light ( $ 6.00 for a good one at any auto parts store) Test both sides of the fuses to find a bad one
I have seen them bad when to look at the I would have bet you a hundred bucks it was good

Nov 14, 2009 | 2001 Ford Super Duty F 450

1 Answer

1999 Ford F 350 7.3 blowing white smoke


Check the EGR and the fuel pressure regulator.These are very common culprits.

Jan 10, 2009 | 2001 Ford F350 Super Duty SuperCab

Not finding what you are looking for?
2001 Ford F350 Super Duty SuperCab Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...