Question about 2007 Ford Excursion

1 Answer

Ford excursion door handles

Someone broke into my excursion by braking the door handle and punching in the lock. is there any thing out there that would not break as easy and or something i can do to upgrade them cause my radio missing now was over a grand. sucks!!! dammmm assholes from dallas=)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

Consider remote handle-less door lock kit.
Big bucks but no door handles or locks..

May want to consider an aftermarket alarm with a paging remote. that will signal you if anyone is messing with your car (within the distance limits).

But if you think about it... you can do all that, and they can still get in like they did to mine in Ensenada Mexico recently.... smash the window and take all they want... So upgrading the locks in only a deterrant ..
Anyway you cut it, it sucks, I know..
Good luck..
Ps. I've kept the factory radio... because it's ugly and no one would want to steal it, but under the seat is a poweramp and sub, and it's got an ipod connector to the stereo... it's a sleeper...power and quality speakers, but no one will steal the head unit!!

Posted on May 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door handle broke


can you open from the inside, its the only way you going to get to sort this, failing that you may need to get a new door card and rip the one off the door at the top corner near to the lock latch and split the plastic and pull the door pin inside to open then take the door card off. sometimes you can do it with out braking the door card but would not say it will not brake. inside there is a plastic clip that the handle go's on then another bar to the lock. this is designed to snap if some one trys to open the door with force.failing that the handle part can snap where the bar fits to it. that you would need to change the handle.

Dec 06, 2013 | Land Rover Cars & Trucks

1 Answer

Interior handle is broke and door wont lock? How much to repair?


Not enough info. It could be simply the interior handle broke and a new one is about 30 bucks. U say it won't lock. This could be cause by a stuck door lock actuater. This part may have caused the handle to break. U need to find a good mechanic & he will have to take the door panel off and see exactly what is wrong and give u an estimate. Good luck.

Sep 24, 2012 | 2008 Ford Fusion

1 Answer

2008 ford fusion interior door handle does not work so my sister has to roll down her window just to get out of her car. how can i check to see what the problem is ?


you have one of two things that happen,, 1. the handle broke , 2. the connecting rod has come off,,,, which is usually y the case,, in the HELP section of the auto parts store, they have little clips that are for replacement,, his is what breaks most the time from extended use, and they are cheap ,, remove the inner door panel,, you will see a sheet of plastic,, peel it up out of the way,, Look inside the openings in the door where the handle is located, you should see the rod hanging loose,, if it was just knocked off by someone trying to unlock the door with a slimjimm or something like that , Just pop it back in place, if the clip broke, replace it, and your set to go

Oct 01, 2011 | 2008 Ford Fusion

1 Answer

Need to replace inside door handle that broke completely off. How do I replace this section?


you will need to remove the cover around the handle they are easy to brake from the inside of the outside cover ring go from the inside with a small screw driver and slide between and pry the cover up it has 4 mounting points top left top bottom right and left.
next pop off the switch from the front slide a screwdriver at the front leading edge and push it towards the back of the door panel and lift gently there is a flange on the rear of it that holds the rear of the assembly down dont pry up on the back lift the front and slide it forward unplug all the wires. remove the two screws inside the door arm rest where you pull the door shut. the cup to close the door. next you need to remove the mirror cover at the front top of the door panel slide a screwdriver pry
straight out. using a door panel clip tool. slide under the panel at the bottom rear corner to find the clip and pry the clip out of the hole. work your way around the door to each clip. sometimes you can pull the panel off with your hands but if you are not experirenced you might break some clips or the door panel be nice to it dont break things. all the way around the sides and the bottom are released then pull away from the door and hold the bottom and lift up and hit the top of the door handle with your hand so the clips will release accross the top. remove the light socket from the rear bottom of the door. place the panel somewhere so you dont scratch it up. now remove the rivet from the handle. I punch the center out then use a sharp chisel to punch it off. you may want to drill the rivet. up to you. then the handle slides forward and you have to disconnect the linkage clips from the handle. install the new handle make sure the lock rod is in the hole that slides the lock. hook up the linkages new slide back in position and rivet then reverse the prosess of removing the handle

Dec 12, 2010 | 1999 Chevrolet Suburban

1 Answer

The driver side door lock wont go all the way up.


The outside door handle spring is broke ,or the latch spring is broke. The only way to tell is remove the door panel and inspect the rod from the handle to latch. Look for broken spring on handle. I have installed an external spring from the handle rod to latch to keep the rod in the full up position.

Nov 18, 2009 | 1999 Ford Ranger SuperCab

1 Answer

Replace left front door outside handle pot metal tip broke off


SECTION 501-14: Handles, Locks, Latches and Entry Systems 2001 Escape Workshop Manual REMOVAL AND INSTALLATION Exterior Front Door Handle Removal and Installation
  1. Remove the front door trim panel. For additional information, refer to Section 501-05 .
  1. Position the watershield aside.
  1. NOTE: The tie strap does not need to be reinstalled.
    If equipped, remove the tie strap from the anti-theft guard.
  1. Remove the screws and position the anti-theft guard aside.
  1. Release the clip and disconnect the exterior door handle actuating rod.
88661dd.gif
  1. Remove the anti-theft guard.
  1. Remove the exterior door handle screw.
  1. Remove the exterior handle actuating rod.
  1. Remove the exterior door handle lock cylinder cover.
  1. Remove the exterior door handle.

Apr 25, 2009 | 2001 Ford Escape

1 Answer

Door lock broke


rod is very hard to break it just the handle the clips broke so you just need a new handle

Feb 15, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

How to replace '96 Ford Explorer driver side exterior door handle


You will need to remove the door panel to gain access to the handle. Roll the window up or down as needed to get to the nuts that attach the handle to the door. You will also need to remove a rod the goes to the door lock. You will see the rod after the door panel is removed. Good luck.

Jan 19, 2009 | 1996 Ford Explorer

1 Answer

Door handle


take handle off on inside/ should be one screw/ push or pull rod and it should unlock. Power door lock motor may be froze up common problem with that model. Not using the doors can cause them to lock up also.

Jun 18, 2008 | 1997 Ford Explorer AWD

Not finding what you are looking for?
2007 Ford Excursion Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...