Question about Chevrolet Malibu
Replace the blower motor resistor. Remove the shroud below glove box, 2 screws and a snap-pop fitting. Be careful of the courtesy light. Remove the blower moter and disconnect the purple/black power connector to it - - you'll need this extra room to work with. 2 more screws, same size, 6.5mm on mine, 7or 8mm on some others, that holds the blower motor resistor in place. This replacement part is less than 40 bones at most parts store. Unplug, replace, re-install, test and you're on your way with about 2 hours of slow paced effort in your own driveway. Typical cost at a garage - up to $400, what a sham.
Posted on Mar 19, 2009
The blower motor is located under the dash on the passengers side. I will assume the blower quit on ALL Speeds, not just speeds other than High.
Using a 12 Volt test light or DC Voltmeter (DVOM):
Check for power to the blower motor with the Key ON and Blower set to HIGH. Unplug the electrical connector for the hot wire and use a known good ground. If you have about 12 Volts with no electrical connector damage, the blower motor is bad.
Update me and we'll continue as necessary.
Posted on Dec 17, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 03, 2011 | 2001 Chevrolet Malibu
Jul 29, 2010 | 2001 Chevrolet Malibu
Feb 27, 2010 | 2001 Chevrolet Impala
Nov 22, 2009 | 2003 Chevrolet Malibu
Oct 31, 2009 | 1985 Chevrolet Chevy
Apr 20, 2009 | 2006 Chevrolet Trailblazer
Apr 13, 2009 | 2001 Lincoln LS
Mar 08, 2009 | 2001 Lincoln LS
Jan 09, 2009 | 2007 Chevrolet Equinox LS New Cars
978 people viewed this question
Usually answered in minutes!