Question about 1995 Buick Park Avenue

2 Answers

Engine runs very sluggish at start up

My check engine light is on had it checked but for some reason error comes back computer wont read it help!!

Posted by on

  • jamieoberlin Dec 17, 2008

    i changed the fuel filter next to the wheel well- under passenger side seat, is there another fuel filter i dont know about?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Change fuel filterS...plural
Don't forget the big canister unit under (next to wheel well)

Posted on Dec 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello i have a 1995 buick park avenue that has a rough idle and stalls in the mornings after sitting over night the first two or three times it will stall but after that it idles rough til it gets warm,ok since the problem has started i've changed the fuel pump fuel filter cataylic converter spark plugs egr valve mass air IAC throttle body vaccum lines and flange exhaust gasket and the problem still continues i need help

Posted on Mar 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Renault trafic wont start...engine warning light flashing


The light and the word stop should be sending you a clear message . The engine hard starting and sluggish is also sending a message and if you do not heed the message and have the fault codes read and the problem fixed then the next message may be replace the engine or gear box . The light is there --not to be an annoyance ---but to inform you that something drastic is going wrong and it needs urgent attention.

Mar 09, 2014 | Renault Cars & Trucks

1 Answer

I have a 2001 Toyota Ipsum 240e. The engine check light goes off when I disconnect the battery terminal. The light will not come on when the engine is run as long as required but once it is switched off...


You should have the error code read from the vehicle's computer (a code scanner is needed for this). If you constantly are disconnecting the battery, some manufacturers program an error code in the computer indicating that the battery has been disconnected within the last XX number of starts. If the code is P1600 or P1630, this is probably your problem. If you're disconnecting the battery for security reasons, either install an aftermarket security/anti-theft system or realize that the check engine light will keep coming on.

Sep 29, 2013 | 2001 Toyota Sienna

1 Answer

My 01 gmc jimmy spits and sputters on take off and rpms jump around




As per your problem,the check engine light comes on due to technical problems in your car.In this case i suggest you to click the link below :----Check Engine Light On car? http://schematicsdiagram.blogspot.com/2011/06/check-engine-light-on-car.html
------------Basically the computer needs to be scanned to retrieve the error codes stored in ECM.In this issue,i suggest you to click this link:----How to Read Codes from Check Engine Light? http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html----------After scan procedure you will get P4 digit error codes.If suppose you get this error codes,then click the link below,to know more about error codes:----

Check engine light with codes P2195 and P2197?http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html
---------------There are many other reasons to for check engine light coming ON,i suggest you to click this link below and go through its troubleshooting procedure:---------Car jerks while going uphill and Check engine light is ON?http://schematicsdiagram.blogspot.com/2011/12/car-jerks-while-going-uphill-and-check.html
--------One more reason is as follows :----After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?

http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html


---------

After replacing throttle body the Check engine light starts blinking?http://technoanswers.blogspot.com/2012/01/after-replacing-throttle-body-check.html

---------

This will help.Thanks.

Feb 16, 2012 | Cars & Trucks

1 Answer

How to reset engine service light 2001 lincoln towncar


As per your problem,the check engine light comes on due to technical problems in your car.In this case i suggest you to click the link below :----Check Engine Light On car? http://schematicsdiagram.blogspot.com/2011/06/check-engine-light-on-car.html
------------Basically the computer needs to be scanned to retrieve the error codes stored in ECM.In this issue,i suggest you to click this link:----How to Read Codes from Check Engine Light? http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html----------After scan procedure you will get P4 digit error codes.If suppose you get this error codes,then click the link below,to know more about error codes:----

Check engine light with codes P2195 and P2197? http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html
---------------There are many other reasons to for check engine light coming ON,i suggest you to click this link below and go through its troubleshooting procedure:---------Car jerks while going uphill and Check engine light is ON? http://schematicsdiagram.blogspot.com/2011/12/car-jerks-while-going-uphill-and-check.html
--------One more reason is as follows :----After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?

http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html


---------

After replacing throttle body the Check engine light starts blinking? http://technoanswers.blogspot.com/2012/01/after-replacing-throttle-body-check.html

---------

This details will help you.Thanks.

Feb 16, 2012 | Lincoln Town Car Cars & Trucks

2 Answers

Engen light came on


When the Check engine light comes on an error code is recorded. Parts stores will read the error codes fro free. That will tell you the reason for the light. If there is a part needed it will identify what part.

Apr 05, 2011 | 1998 Ford Windstar

3 Answers

What could be the reasons for the check engine light to come on and stay on?


if your engine is running different then before the check light came on. have your computer system checked for error codes. start there. or your owners manual. or a service manual at your local auto store.

Jun 07, 2010 | 1998 Ford Explorer

1 Answer

94 Camry was running fine, suddenly became sluggish


How did you try to obtain the codes? Did you short pins E1 and Te1 in the grey connector under the hood?

When the light comes back on, short the above pins, and get back to us.

Without seeing the codes, I would venbture a guess that you first consider a good tune-up, and use Toyota plugs only. Any other manufacturer will not work very well. I see this every day, new plugs, and the engine runs poor. Toyota plugs fixes it right up. The heat ranges are diffferent in Toyota plugs.

Nov 03, 2009 | 1994 Toyota Camry

1 Answer

Sluggish performance and engine light - added new plugs and oil


You need to check for engine codes to see what is wrong. Bring it to a parts store for a free scan for codes. The check engine light indicates a problem, probably the emissions system, which is causing the poor performance. The parts store will plug a hand held scan tool into the cars diagnostic port (usually located under the dash) and 'read' any codes stored in the cars computer. They can them tell you what code #'s come up, what they mean, and how to correct the problem. If you have any questions after that, post them here w/ the code #;s for further help.

Jul 27, 2009 | 2003 Toyota ECHO

1 Answer

1996 chevy cavalier


The reason it all goes circuslights could be that the alternator is overcharging.
The charge rate increases as the load and engine revs go up but only supposed to be a little, thats what the voltage regulator on the alternator is for.. when the regulator fails and alternator is overcharging eventually enough power is sent through the ground to light everything up and the computer cannot run properly.
High voltage levels cause sensors to read incorrectly so the computer cannot manage the engine.. Suggest you check out the charge cicuit at idle, at 2500 and at 3500 revs (briefly!)
Charge should be between 13.5 at idle, to 14.6 at 3500
Its a starting point for diagnosis.
Note that putting the alternator on a machine at Autozone will not necessarily pick up the fault - it needs to be checked ON the vehicle.
Hope this helps

Jan 07, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1995 Buick Park Avenue Logo

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...