Question about 1998 Ford Escort

1 Answer

Hi i need the torque setting for ford escort p reg cylinder head and cam bearing can you help

Posted by on

  • Anonymous Mar 18, 2014

    need the torgue settings,head, main bearings etc.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 40 Answers

Hi the cylinderhead torque settings are
STAGE 1, 30Nm (22l bf ft)
STAGE 2, 50Nm ( 337 lb ft ),
STAGE 3, angle tighten another 90 degrees,
STAGE 4 angle tighten another 90 degrees

Cant help you with the cam bearing though sorry

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine torque settings


Commonly Asked Torque Specs in foot pounds
The main bolts have a torque of 76 lb.-feet and the cylinder head bolts have 62 lb.-feet of torque. The cylinder head studs have 70 foot-lbs of torque, the cam timing gear have lb.-feet of torque, and the cam bearing bolt has 14 lb.-feet of torque.

Crankshaft Torque Specs
  • The stock rod bolts have 46 lb.-feet of torque and the ARP rod bolts have 50 lb.-feet of torque. The crankshaft pulley has 116 lb.-feet of torque, while the flywheel has 80 lb.-feet of torque.


Other Torque Specs
  • The intake manifold and exhaust manifold have 33 lb.-feet of torque each and the oil pan bolts have 9 lb.-feet of torque. The cam timing gear has 58 lb.-feet of torque and the cam bearing bolt has 14 lb.-feet of torque. One set of timing cover bolts have 9 lb.-feet of torque and another set has 29 lb.-feet of torque

Nov 07, 2012 | 1994 Toyota Corolla

1 Answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks


Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Dec 17, 2010 | Volkswagen Polo Cars & Trucks

1 Answer

Need torque specs for 1994 ford escort 1.9 ltr head bolts


Torque new cylinder head bolts in sequence to 44 ft lb. Loosen bolts approximately two turns, then torque bolts in sequence to 44 ft lb. Turn bolts an additional 90 degrees in sequence, then an additional 90 degrees

Torque sequence
9 3 1 5 7
8 6 2 4 10

May 07, 2010 | 1994 Ford Escort

1 Answer

Hi iv got an escort 1.8 16v zeetec its r reg and iv had the head re conditioned i need 2 put the head bck on but i need to no the torqe setting can u help me thankyou.


hi yes here are the torque settings

stage 1 is 25nm
stage 2 is 45nm
stage 3 is turn 105 degrees

try leaving about 10 mins between each torque so it can settle also you have to tighten them in sequence and make sure you use new head bolts as these are the stretch type and if you are using the old ones there could be a chance of one snapping, just a little advice..hope this helped

Feb 15, 2010 | 1998 Ford Escort

1 Answer

2003 mazda 6 3.0 need the main bearing torque specs


I'm sending you the torque specifications for your main bearings and also your head bolts. I also sent you main bearing and cylinder head tightening sequence. I hope this will be useful2c713bf.giffce6623.gif
Main Bearings Torque specs. 40-43 Ft. Lbs.
Cylinder Head Torque specs. 56-60 Ft. Lbs.

Oct 05, 2009 | 2003 Mazda Mazda6

1 Answer

Require ford escort rs 2000 1976 torque settings head bolts


2lt overhead cam with them horrible tappet adjusters,cast iron head but valves dont hit the head if the timing belt breaks ,but it does on the 1600 .called a pinto in america .Remember the assembly line well ,have many a fond memory of working on it and the staff canteen on night shift ,what lovely grub we got.Head bolt torque is about 80lbs because i used to pull them down to check them after the machine had tightened them up

Apr 24, 2009 | 1997 Ford Escort

1 Answer

2000 W reg ford escort wheel nut torque settings


2.0L DOHC Engine 85-105 Ft Lbs EX 2.0L DOHC Engine 65-87 Ft Lbs

Please let me know if this information is helpful. Positive feedback is appreciated. Thank You!

Mar 28, 2009 | 1989 Ford Escort

1 Answer

Cylinder head torque specifications


torque the bolts to 45 ft/lb then tighten each bolt 90 degrees and then 90 degrees again

Jan 03, 2009 | 1986 Ford Escort 4-Door

1 Answer

Cylinder head ford zetec escort p reg


Stage 1 = 15Nm
Stage 2 = 40Nm
Stage 3 = Plus 90 degrees or quarter of a turn. Good tip is to mark all the bolts after initial torque setting with tip-ex , i.e. all to the front of the car. When you finish they should all point towards the timing belt.
This is also a good way to make sure you don't miss one or tighten one twice if you are distracted since it is not a torque setting. New bolts should be used by the way as they are stretch bolts. Timing of cams - remove cam cover and you will see a slot on the end of the cams. Opposite end from belt. You need to slip a piece of 5mm flat bar or a long 5mm allen key into then so that the bar rests on the face of the head. Engine should be a tdc.
cheers John

Dec 17, 2008 | 1998 Ford Escort

1 Answer

Timing zx2 escort TDC ?


The cams have a notch in the back of them (facing driver's side) in which fits a flat piece of steel to lock the cams in place. The notches are not exactly centered on the camshaft, meaning that it's impossible to set them 180 degrees out, because then the flat piece of steel that is supposed to be inserted to lock the cams in place simply won't fit because the top of the cylinder head will get in the way. I highly recommend getting a Hayne's or Chiltons manual if you don't already have one. It should explain this process under the Timing Belt Replacement instructions. The cam lock tool (that flat piece of steel) can be purchased at ZXturner.com:
http://zxtuner.com/product.sc?categoryId=23&productId=191

Jun 24, 2008 | 1999 Ford Escort

Not finding what you are looking for?
1998 Ford Escort Logo

Related Topics:

455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...