Question about 2007 Mazda MX6

2 Answers

Car still won't start

Hi,

purchased a new battery, but car still only ticks and the hazzard lights keep flashing. could it be imobilisor?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

If your security light is blinking red with the key in the on position it's an immobilizer problem could be as simple as reprogramming the keys.

Posted on Dec 18, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 6,982 Answers

Don't remember posting anything to you, But, regardless, first a question... Can you turn off the flashers
at the switch?? Do you have an alarm system? (if so, possible malfunction there) Otherwise, check battery grounds and connections (other ends of cables from battery) if you have one, check start relay&or starter solenoid!

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Did a flasher fuse hazzards work still no directionals


it will be the flasher relay the part you hear tick when turning a corner when flashers going is it ticking when turned on do the lights even flash

Dec 01, 2014 | 1995 Nissan Altima

1 Answer

Turn signal and hazzards won't work; have checked fuse and is good.


Flasher been checked? Do lights come on, but no flashing, or nothing?

Apr 18, 2013 | 2003 Dodge Durango

1 Answer

I can't start my 1995 hyundai elantra after forgetting to turn off the lights when going for class. I try to jump start it but the car won't start and all the lights keep on flashing and flick


After connecting battery, try using key in drivers door to lock, and /or unlock. Try passenger if that doesn't work, as well as valet key if it came with one.

Nov 21, 2012 | 1995 Hyundai Elantra

1 Answer

1992 mazda protege dx 4 dr won't start. Battery is only 2 months old. Makes a fast ticking sound from inside car similar to turn signal light out.


Hi Robin, As the battery is new and presumably not defective, I think you should suspect the soloniod fitted to the starter motor. If that component has become defective it will give the sound you're reporting. Depending on where you live in the world and the labour charges, you can have the contacter's replaced or the starter motor (if labour charges are high) Regards John

Jun 30, 2012 | Mazda Protege Cars & Trucks

1 Answer

Alarm issues


What kind of issues?

Dec 14, 2011 | 1996 Chrysler Sebring

1 Answer

I have a ticking like a blinker sound ticking inside my vehicle.. it sounds like a continuous blinker going. All my out side lights flashers blinkers are working .What could this be?


look for the hazzard /4 ways switch. see if this is where this ticking is coming from. if so slowly move the turn signal switch . if it stops or changes, you have a bad turn signal switch. the hazzard and the turn signals operate through the hazzard switch..it has a built in relay.hope this was helpful

Feb 28, 2011 | 2005 Pontiac Grand Am

1 Answer

I have 850 volvo and keep getting imobilisor and alarm when i go to start it new battery it doesnt reset


Hi

Did you switch the new battery over directly after you removed the old one? If so try disconnecting the car battery for a few hours, then when you put it back on put the live "red" on first then the "negative" black second. this often resets the immobiliser.

Hope that helps.

p.s in some cases with other makes you have to leave the battery off over night as the immobiliser if factory fitted has a battery backup built in. this needs to run dead.

Regards
Dan

p.s.s also try lock and unlock with the key not the remote.

Dec 29, 2010 | 1997 Volvo 850

1 Answer

New key fob


Just get in your vech , close all doors. Using your power lock switch , lock all doors. After doors are locked take your Ignition Key and insert it and remove it from ignition switch in a slow fashion , but consitant pace. (97 and earlyer are fast) When you see the hazzard lights flash, put key in ignition switch and turn to the On postion .. Do NOT CRANK or you will have to Start over .. After in the On postion .. Hit the Lock button on remote... Hazzard lights should flash..( note..you have to reprogram all remotes when adding a new one , if you don't your old remotes will not work ) If your doing just the one , turn igntion switch off and unlock door and get out and try it. If you are doing more than one. While still in Vech with Key on . After you hit the Lock button on Remote and hazzard light flashed .. with key still on .. use master lock switch unlock doors and relock and then hit Second Remote, Lights should flash again , repeat if adding a 3rd remote.. after done just turn key off and unlock door and get out and try. Good Luck :)s.gif

Oct 26, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...