Question about 2002 Mitsubishi Lancer

Open Question

How to remove spark plug of mitsubishi airtrek

I want to change the spark plug of my car mitsubishi airtrek

Posted by on

  • ash seder May 11, 2010

    what engine are you running?

×

2 Suggested Answers

  • 333 Answers

SOURCE: Change spark plugs

Remove the intake baffle if equipped (5 10mm screws), then remove the coilpacks/wires (10mm bolts), then remove sparkplugs (use 5/8" socket)

Posted on Sep 10, 2009

SOURCE: how do I change timing

Don't want to steer you away from this or scare you away from saving some money...probably a lot of money, but depending on the size of the motor (litere size)...it is most likely an interference motor. This means that piston to valve contact is almost sure to happen if you make a mistake. You need to be very carefull when doing these types of jobs. If the valves bend because a mistake was made...it could make the price of a preventative maintanence timing belt seem like pocket change. Head has to come off of the car and well....it can get very expensive and messy. My proffesional suggestion is that you have a trustworthy, competent technician do this job. When you do it, make sure you change all pulleys, hydraulic tensioner, and water pump if it is in line...which I am almost positive it is. Just get it done right the first time. Thats my motto. If you are aware of the risks and are ok with it....I will be more than happy to post the service procedure for you. There are some special tools that you may need as well

Posted on Nov 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi Airtrek. 2001 model. When starting the


Iwould first try to change the fuel pump relays one is in the glove box and the other should be under the hood in a black junction box

Oct 12, 2014 | Cars & Trucks

1 Answer

Many quarts transmission fluid need for 2001 mitsubishi airtrek


you need to read the owner manual for must be sure.
or download from www.retrevo.com or www.fitness.manualsonline.com

God bless you

Jul 10, 2013 | Mitsubishi Cars & Trucks

1 Answer

Changing spark plug 2003 diamonte


Hi, to change the spark plug, remove the engine cover and intake manifold plenum. Remove the spark plug cables. CAUTION: When pulling off the spark plug cable from the plug always hold the cable cap, not the cable. Remove the spark plugs.
Hope it helps.....

Jul 12, 2011 | 2003 Mitsubishi Diamante

2 Answers

My spark plugs in my 2004 Mitsubishi Endeavor needs to be changed, and my husband wants to do it himself so is there some way to give me some instructions on how to change spark plugs for my 2004...


YOU NEED LONG SPARK PLUG SOCKET. NEED A 3/8 INCH RATCHET WRENCH.YOU NEED EXTENSION.YOU NEED SPARK GAUGE YOU NEED A TORQUE WRENCH. NOT MANDATORY JUST DONT OVER TIGHTEN SPARK PLUGS STRIP ALUMINUM THREADS WAIT UNTIL ENGINE COOL TO KEEP FROM WARPING THE HEADS. SPARK PLUGS LOCATION ON TOP OF CYLINDER HEADS.TO GET TO SPARK PLUGS THE COILS ON TOP EACH SPARK PLUG.HAS TO BE REMOVED BY REMOVING SMALL SCREW.THAT HOLD COILS DOWN.AND CHANGE ONE SPARK PLUG AT A TIME SO YOU WONT GET THEM MIXED UP.GAP PLUGS AT 0.028 - 0.031

Jan 28, 2011 | Mitsubishi Endeavor Cars & Trucks

1 Answer

My Mitsubishi Airtrek, is charging the batter at the rate of 14.5 Volts, is this to high and how do I remedy it.


No, this is perfectly normal. The alternator should put out between 13.5 −16 volts. You have no problem.

Aug 10, 2010 | 2003 Mitsubishi Outlander

1 Answer

How do I change the spark plugs in a 2003 Outlander


1.cool off engine
2. remove spark plug high tension cord from the spark plugs.
3. remove spark plugs using a spark plug socket wrench by turning it counter clockwise
4. install new spark plugs and high tension wires...

Apr 07, 2010 | 2003 Mitsubishi Outlander

1 Answer

Free how to change spark plugs on a 2000 mitsubishi galant es


You have to pull the spark plug boots out of the valve cover and use a long extension with a spark plug socket and remove them.

Mar 29, 2010 | 2000 Mitsubishi Galant

1 Answer

Change spark plugs


Remove the intake baffle if equipped (5 10mm screws), then remove the coilpacks/wires (10mm bolts), then remove sparkplugs (use 5/8" socket)

Jun 17, 2009 | 2004 Mitsubishi Outlander

2 Answers

On my 2004 Endevor, change the spark plugs reuires removing what?


To get to the rear spark plugs you have to remove the intake plentum (Black plactic piece on top of motor)

Mar 04, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Mitsubishi Airtrek (outlander) Question _wiper blades


try tapping lightly on the base of the wiper with a rubber hammer. do not break your winsheild.

Nov 30, 2008 | 2003 Mitsubishi Outlander

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...