Question about 1997 Hyundai Elantra

1 Answer

Lantra gear box problem

Hey hope you can help i have a problem with a auto lantra j2 coupe 06/97.
when you try going from park in to drive the car jolts a bit but dosnt select drive but if you go to low it will select and then it will start moving and then it will select drive. plz help - i cheaked over the levels at work and all is fine ATF is brand new

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Hyundai Expert
  • 152 Answers

Hi the trans range switch or some times called an inhibitor switch needs replaced and have the bands adjusted for the transmission which is an external bolt with jamb nuts near the range switch after that has been performed the battery cable removed for 10 minutes to reset all adaptive learn for transmission

Posted on Nov 03, 2017

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: Hyundai Coupe gearbox ( not car in product)

hi there! i was a master tech 4 hyundai, first of all has the atf fluid been changed and at the correct level. or have you had the multifuntion switch checked? please feel free to contact myself and i will advise you as required with my exsperience

many thanks

Dominic Hill

Posted on Dec 11, 2008

didik23
  • 35 Answers

SOURCE: gear box dip stick location- hyundai lantra automatic

try the left side of the engine... gear oils smell are diffent from the engine oil and the viscosity... gear oils are thicker... u wont go wrong on this...

Posted on Jul 19, 2009

SOURCE: gear disengagement while driving an automatic car.

The gear oil must be very low, have it checked out & refilled

Posted on Oct 12, 2010

SOURCE: ive replaced clutch and gear

1. replace your gear oil.
2. is this an automatic or manual transmission engine? if manual, adjust your clutch release a little higher than usual to let your clutch engange earlier.

Posted on Aug 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine stops while trying to park, car jolts when going 35+ mph.


Try replacing the sparkplug wires. These are all common symptoms of bad sparkplug wire on a DIS ignition system. I would also suggest changing the fuel filter. I tell all my coustomers to replace their fuel filter at every 3'rd oil change i.e. 80 to 90K. hope this helps:)

Mar 14, 2014 | Ford Freestar Cars & Trucks

1 Answer

Car rolls park


drive shaft is disconnected or the rear end is shot-cheers Denny

Oct 31, 2013 | Cars & Trucks

1 Answer

Hey, I drive a 04 Infiniti G35 coupe, when I first bought it off a private seller I realized that whenever I did a auto-car wash the passenger floorboard would fill with water. It seems to be coming...


Gday mate,geoff here, seems a smple problem of a blocked drain in the plenum chamber, simplified, it's the chamber under the windscreen wipers where the wiper motor is, most probably black plastic, in there will be full of leaves & whatnot, clear these out and use your garden hose to clear the little drain in there and presto, the chamber is currently full and leaking in through the vent on that side, hope this helps, geoff.

Feb 09, 2012 | 2004 Infiniti G35 Sport Coupe

1 Answer

Ive replaced clutch and gear lever cables but it still is stiff going down throught the gears also had new gearbox on a j2 lantra


1. replace your gear oil.
2. is this an automatic or manual transmission engine? if manual, adjust your clutch release a little higher than usual to let your clutch engange earlier.

Aug 17, 2011 | 1998 Hyundai Elantra

1 Answer

I have a hyundai Lantra 1998 and i am trying to get a workshop manual does anyone know where i can get one ?????? what is the difference between a Elantra & a Lantra other that the letter


the manual can be purchased at auto zone or advanced auto parts. if no luck there, try looking it up online at clear mechanic.com if that does'nt help try webresourceful.com for a complete auto manual online.clear mechanic will give an indepth look where parts are located.webresousreful.com will want you to pay online for an auto manual. hope this helps and thank you for choosing fixya.com

Mar 20, 2011 | Hyundai Elantra Cars & Trucks

2 Answers

When you shift into gear from park, our Jeep jerks a bit. We have it up for sale and potential buyers are afraid its the transmission that is going. Is that always the case, is there something we can...


its only the transmision taking up the slack of the fluid drive.a tip is to allways have your foot hard on the brake when changing into gear(safety factor) now if it were a limo, that would not be right......

Aug 26, 2010 | 1997 Jeep Grand Cherokee

2 Answers

Will not shift into 3rd until 55mph its an automatic what is possible cause?


Check your auto transmission levels. Slow, often jerky, gear shifting is often accompanied by a bit of a jolt when putting it into drive from park or neutral. When fluids are low the torque converter impeller has to work harder to get pressure up and therefore it is slower at shifting to the next gear . Low transmission fluids also lead to poor fuel consumption.

Apr 23, 2010 | 1994 Toyota Pickup

1 Answer

When I shift the car into park there is a jolt


You could have some play in your motor mounts. They are made of rubber and being your over 10 years old the rubber probably has shrank and is allowing the engine to shift a bit. My 2001 is doing the same.
I had someone shift it from park to drive and back to park while I watched the engine running with the hood up.

Sep 24, 2009 | 1998 Chrysler Sebring

1 Answer

Handbrke adjustment


the adjustment is inside the passenger compartment. will give you the instructions i have:
1. fully release the brake lever
2. pull the parking brake lever with normal effort. maximum travel should be 6 to 8 clicks
3.remove the console and adjust the cable length by turning the nut on the equalizer
4.recheck the parking brake stroke and adjust the stroke as necessary
5.loosen the parking brake switch mounting bolt. adjust the switch so that when the lever is fully released, the switch lamp goes out, and when the lever is pulled one click the switch lamp illuminates.
6.if the switch does not operate as described, check the switch lamp bulb. if the bulb is good, replace the switch.
7. after the adjustment make sure that the rear brakes do not drag when the parking brake lever is released.
8. install the console
hope that helps

May 28, 2009 | 1995 Hyundai Elantra

1 Answer

Hyundai Coupe gearbox ( not car in product)


hi there! i was a master tech 4 hyundai, first of all has the atf fluid been changed and at the correct level. or have you had the multifuntion switch checked? please feel free to contact myself and i will advise you as required with my exsperience

many thanks

Dominic Hill

Dec 09, 2008 | 1998 Hyundai Elantra

Not finding what you are looking for?
1997 Hyundai Elantra Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

83940 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22441 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...