Question about 2006 Pontiac G6
Theres two bolts on top of the lighting housing that you have to remove first. in the back corner of the housing there is a ball and joint that you have to slip out this will remove the housing from the car. on the back of the housing there is three circlular disks that u can twist off which will expose the bulb. repeat these steps in reverse to reinstall.
Posted on Feb 11, 2009
to raise you headlights there is a small brass allen screw located above each headlight under the hood. to raise your headlights turn clockwise until they reach the desired level.
Posted on Oct 23, 2008
its probally a haligen bulb needs replaced from the inside under the hood that twists in the back of the light just half a turn the unplug old and put in new
Posted on May 31, 2009
There are 2 white retainer clips behind the headlight. Pull these up and out and remove the lamp. Light bulbs are twist and turn pull out and replace without touching the bulb. Open the end that plugs in and use the plastic bulb came in to hold and push in. Replace lamp the same way removed. Place headlight in mount panel and put retainers over the h/l tabs and push down. Do this carefully these are plastic and break east and are about 4.50 each. Thanks
Posted on Nov 06, 2009
Posted on Nov 20, 2009
It's really easy to get to the headlight. You have to pull really hard on the whole headlight assembly to pop it off its ball tab. Then unscrew the round back of headlamp and change it. Push the assembly back into place with a lil force. Replace plastic tabs you have to take out to loosen top of bumper and your all done. No need to spend a lot of money at a shop its a do it yourself project.
Posted on Feb 01, 2010
Tips for a great answer:
Nov 12, 2010 | 2006 Pontiac G6
Oct 14, 2010 | 2006 Pontiac G6
Mar 27, 2010 | 2006 Pontiac G6
Jan 19, 2010 | 2006 Pontiac G6
Dec 30, 2009 | 2007 Pontiac G6 GT Convertible
Nov 16, 2009 | 2006 Pontiac G6
Dec 22, 2008 | 2006 Pontiac G6
Oct 13, 2008 | 2006 Pontiac G6
420 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: