Question about 2002 Kia Sedona

1 Answer

Serpentine belt how do i change a serpentine belt

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

Hi Lucamp7,

It's easy and you won't need a prybar. If the belt routing diagram is not to be found under the hood, make note of it before you begin.

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • For putting the belt on: Get the belt around all the pulleys except the A/C compressor or Alternator.
  • The tensioner pulley is on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
To get the belt off, apply enough pressure to the tensioner to get the belt off one of the smaller pulleys.

Hope this helps you out.
Mike

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt diagram 2002 Ford escort zx2


The picture is for a zetec. Let me know if wrong diagram?
26017169-0d1su300qx55v1h5u01lpo5r-3-0.jpg

Dec 21, 2015 | Ford Cars & Trucks

1 Answer

How to change power steering belt


How To Change The Serpentine Accessory Belt On Nissan Maxima Altima Etc

Nissan Drive Belt Tensioner and Belt Replacement 3 5 Front Wheel Drive

There are several videos on how to change out the serpentine belt For more info just do a web search " 2002 Nissan Altima serpentine belt replacement".

May 26, 2014 | 2002 Nissan Altima

1 Answer

Instructions needed for changing serpentine belt on 2002 Ford Windstar 3.8L


  • the serpentine belt routing chart, adhered to the fan shroud. This chart will show you the location of the belt tensioner.
  • 2 Pull the belt tensioner off the belt with the serpentine belt tool. Reach in with your free hand and slip the belt out of the tensioner's path and then slowly move the tensioner back into position.
  • 3 Pull the belt off the remaining pulleys by hand


  • Read more: 2002 Ford Taurus Serpentine Belt Removal ' eHow.com http://www.ehow.com/how_7233863_2002-taurus-serpentine-belt-removal.html#ixzz1XPRa20xf

    Sep 09, 2011 | Ford Windstar Cars & Trucks

    1 Answer

    Change a serpentine belt on a 1996 chevy cavalier


    Diagram should be under the hood
    The auto tensioneris down low and dificult to get to.
    If it has not been changed in a while you will need a long thin push stick and a serpentine tool.
    Push on the belt hard at the auto adjuster and pop the belt off the smooth pully (located top).
    hook up the serpentine belt tool and then mount the new belt

    Jan 17, 2010 | 1996 Chevrolet Cavalier

    1 Answer

    Replace serpentine belt 1998 olds cutlass


    Here's a link to a series of videos that will explain how to change the serpentine belt.

    http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

    Here is a diagram of the belt routing which will help you put the belt back on correctly...
    18841fa.jpg

    Dec 05, 2009 | 1998 Oldsmobile Cutlass

    2 Answers

    Changing serpentine belt 3.8 2007 pontiac grand


    • Make sure your new belt exactly matches the old belt demensions
    • Take a breaker bar or big rachet & release the tension on the automatic tensioner; very slowly
    • Loop the old belt around the pulleys & fan
    • Install new

    Oct 17, 2009 | 2007 Pontiac Grand Prix GXP Sedan

    1 Answer

    How do I change the serpentine belt?


    Here's a good series of short videos that deal with repalcing your serpentine belt. Hope it helps you!
    http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

    Aug 15, 2009 | 1994 Ford Escort

    1 Answer

    Chage serpentine belt


    Try watching this set of free videos to see if it helps to explain how to change the serpentine belt...
    http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904_6/

    I'm connecting you with video #6, but you can always go back if you like.

    Aug 08, 2009 | 2006 Pontiac Montana SV6

    1 Answer

    Serpentine belts


    Altima doesn't have serpentine belts. There is one belt for the a/c and one for the alternator p/s pump.

    May 14, 2009 | 1998 Nissan Altima

    Not finding what you are looking for?
    2002 Kia Sedona Logo

    305 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kia Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    yadayada
    yadayada

    Level 3 Expert

    61168 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Kia Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...