Question about 1993 Lexus Es 300

1 Answer

Rear Brake Light Bulb Replacement " one in rear window" 93 es300

How do i get to that bulb? It"s the one in the rear window deck on my es33 1993...Hellllppp mmmeeeee pplleesse,,And thank you nofearspear

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 651 Answers

If there are 2 screws holding it on, remove them. if no screws, it's just snapped in. use small screwdriver to pry it off.

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change high mount brake light bulb in a 2002 lincoln navigator


Instructions
    • 1 Open one of the rear doorsicon1.png of the LS. Position yourself on your knees in the back seat, facing the rear deck or rear dash.
    • 2 Remove the cover from the high-mount brakeicon1.png light assembly, by hand. Pull the cover toward the front of the vehicle. Do not pull extremely hard, or you will break the clips that mount through the deck from the trunk.
    • 3 Pull the old light bulbsicon1.png out of the high-mount assembly. Wrap the new bulbs in a paper tower prior to picking them up. Insert new bulbs into the assembly, by hand. Do not touch the bulb lenses with your hands directly.
    • 4 Install the high-mount cover onto the rear deck and push the cover toward the rear glass to lock it in place.


Read more: http://www.ehow.com/how_10060583_replace-upper-brake-bulb-2001-lincoln-ls.html#ixzz30cNQ559F

May 03, 2014 | Cars & Trucks

1 Answer

Rear window brake light dead how do I repaire it ?


The third brake light socket is located inside your trunk...under the rear shelf...unscrew the socket counterclockwise to remove the bulb...use a book (or your manual) to confirm replacement with the exact bulb type...have help to check before completing. Hope this helps.

Feb 01, 2011 | 1998 Saturn SL

1 Answer

How do i fix the brake lights on my 93 altima


check this out it should help you out http://www.paulstravelpictures.com/Nissan-Altima-Rear-Brake-Light-Bulb-Replacement-Guide/Nissan-Altima-Tail-Light-Bulb-Replacement-Guide-011.html

here you can see every step to that question.. I just did it.. and works

Apr 23, 2010 | 1993 Nissan Altima

1 Answer

How do you change the rear window brake light bulb on a 93 Honda


unscrew the case from around the light pull the case off and then youll have access to the bulb take the bulb out usually turns counter clockwise replace with new one reverse the process.

Nov 14, 2009 | 1993 Honda Accord

2 Answers

How do you replace the tail light bulb on a 2000 Lexus ES300?


2002 security light keeps coming on, is there any permanent fix
besides turning key on for ten minutes

Nov 05, 2009 | 2000 Lexus ES 300

1 Answer

Toni Here - I have 2000 Lincoln LS - 5 speed - the brake light in the back rear window - cyclops light is not working - how do I replace that bulb please?


Firmly press down on the brake light cover. Press down into the rear deck. This will release the bezel from the teeth on the metal housing. Now slide it forward ( toward the front of the car) while holding it firmly pressed down into the rear deck. Once removed you will see how the metal teeth on the bottom of the metal housing bracket bit into the plastic bezel.

Oct 21, 2009 | 2000 Lincoln LS

2 Answers

Replacing third brake light bulb lexus 2001 es300


If you mean the 3rd as in lite on the rear dash , the cover pops off from inside the car.You must flex it it slightly from the sides or gently try to pop it with something wide , but flat like a putty knife. the bulb should be a common one

Sep 15, 2009 | 2001 Lexus ES 300

2 Answers

My high level brake light has bruned out,(third brake light). I was informed by the dealer the back window panel has to be removed to replace the 3.00 dollar bulb, total cost 75.00 dollars. With some


replace the bulb...??? This requires you remove the rear package deck (to access the bulb & socket). to do this, remove the seat bottom (two bolts hold the rear seat bottom to the chassis, then remove the bolts which hold the shoulder cushions (LH & RH - 12mm bolts) then remove the cosmetic molding around the trunk access (7 to 8 screws) then remove the "C" pillar covers (SRS curtain airbag LH & RH) to access the rear deck package & access the third brake lamp bulb. replace it, then reassemble.

May 26, 2009 | 2006 Hyundai Sonata

1 Answer

High Level Brake bulb replacement


If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.

May 18, 2009 | Hyundai Motor 2004 Accent

1 Answer

No juice to the third brake light in a 93 honda accord


The right brake light sensor is located in the trunk area by the right rear taillight assembly.

Apr 13, 2009 | Honda Accord Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...