- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P0404 Exhaust Gas Recirculation Circuit Range/Performance P0502 Vehicle Speed Sensor Low Input P0440 Evaporative Emission Control System Malfunction
hope that helps /a little beyond my expertise but theres your codes your looking for ;)
Can't answer your last question but catalytic convertors that are just not working anymore won't cause any loss of power.
However, if they have shattered inside (they are kind of a ceramic honeycomb) they can dump junk into the exhaust system that can eventually clog your muffler or resonator.
Checking whether this has happened isn't difficult; after the warm up of the engine, either you or a helper needs to listen to the exhaust note.
If firing of the cylinders is still distinct, the system isn't clogged with shrapnel; if it seems to hiss at higher RPMs, it is likely clogged.
This effect is easy to miss; I've had two failures and when cold, the engine would pull fine because the chunks of ceramic would fall to the bottom of the muffler and glue together somewhat.
Once hot and agitated, they would clog the muffler and cause a severe loss of power but the idle would be OK.
A hill that I would normally pull at 70 MPH, I couldn't top at all; had to sit and wait for things to cool down before proceeding.
It also seems some engines appreciate a bit of back-pressure in the exhaust system because the car gained in mileage and pulling power for several thousand miles before the clog became critical causing the mileage to fall sharply along with the power.