Question about 2005 Pontiac Montana SV6

1 Answer

Real right turn signal light - Pontiac Montana SV6 2005

Hello,
How do I replace the bulb for the rear right turn signal light on my 2005 Pontiac Montana SV6. I bought the replacement bulb at the store but don't know how to get to the old one.

Posted by on

  • 4 more comments 
  • Anonymous Mar 16, 2014

    Replaced headlight bulb on my pontiac montana and it still does not work

  • Anonymous Mar 16, 2014

    wipers dont work motor pontiac montana 2005

  • Anonymous Mar 18, 2014

    oil light with tool light underneath it is lite up come on when van is started then turns off in about 5 minutes of driving dales anyone know what this means?

  • Anonymous Mar 22, 2014

    parking brake cable doesn't work. backed adjustment nut up to relieve tension and the pedal is extremely hard to push.

  • Anonymous Mar 24, 2014

    no sound, and battery voltage now up and down from the radio not working.

  • Anonymous Mar 28, 2014

    never was ******* gas

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.

Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My left turn signal flashes rapidly after applying the break


Check your bulbs sound like one is burnt out, or it is not properly grounded. Good luck.

Mar 15, 2014 | 1999 Pontiac Montana

1 Answer

Right turn signal does not work after replacing bulb - 2003 Pontiac Montana


There is probably another burnt out bulb somewhere.
If that is NOT the case then check your flasher relay under the hood, it should be near or in the main fuze box. You can test it by having someone flick the blinker switch and listening you should hear a clicking sound.

Feb 06, 2012 | 2003 Pontiac Montana

2 Answers

2007 cadillac dts passenger side rear brake light is not working


If the turn signal is blinking fast on the dash then this means that the bulb is blowned outside of the vehicle. Check to see that all of your exterior turn signals are lighting up and if not then it's time to replace the bulb(s). Hope this was helpful to you

Oct 30, 2011 | Cars & Trucks

1 Answer

I own a 2005 Pontiac Montana. My drivers side front turn signal went out. My husband tried to take out the right side bulb to see what bulb to purchase. When he tried to get the right bulb out the...


there shoild be a pull out panel under the dash pull it out to check the fuses there should be a diagram of the fuse location on the back of the panel

Oct 23, 2011 | 2005 Pontiac Montana SV6

1 Answer

Im having problems with my rear lighs on my 2001 pontiac montana, the rear lights, i wanna check the computer relay fuse to see if that could be the problem but i dont have the manual to locate the proper...


Replace the rear light assy socket panel, the Montanas have a problem with the plastic melting at the bulb contacts, I have replaced both left and right twice on my 2003 Montana!

Feb 10, 2011 | 2001 Pontiac Montana

2 Answers

2002 Pontiac Montana. Front passenger side turn signal doesn't blink but the bulb is working as a running light. The faulty turn signal connection causes the right turn signal to blink excessively fast. Do...


Need to replace the bulb. There are 2 filaments in the bulb. 1 works parking light the other is turn signal. It flashes fast to alert you that it has a blown out bulb.

Jun 25, 2010 | 2002 Pontiac Montana

1 Answer

Replace front right turn signal bulb


I replaced the front right turn signal on my 2005 Pontiac Montana by reaching up from underneath. I tried removing the battery but the opening from above was too small. I was able to pull the ground effects open enough to get my arm in. When you reach the bulb holder feel for two wings on the bulb socket and give the whole socket a quarter turn to and it will release. The wires are long enough so the entire bulb holder will drop down below the vehicle so you can easily replace the bulb.
Reverse the step to put it back in. You will not be able to see what you are doing so I had someone guide me by watching from above. Took less than 10 minutes once I decided to change the bulb from the bottom. I did not need to jack the vehicle up or use ramps.

Jun 14, 2010 | 2005 Pontiac Montana SV6

1 Answer

2000 pontiac montana. I want to replace the driving ligh bulbs. the under the headlights what size is it?


Fog/Driving Light Bulb Size: 880
Here is the rest of the bulb size used in your Montana.
2000 Pontiac Montana Auto Light Bulb Diagram
Low Beam Headlight Bulb Size: 9004
High Beam Headlamp Light Bulb Size: 9004
Parking Light Bulb Size: 4157NALL
Front Turn Signal Light Bulb Size: 4157NALL
Rear Turn Signal Light Bulb Size: 3156
Tail Light Bulb Size: 3057
Stop Light Bulb Size: 3057
High Mount Stop Light Bulb Size: Assembly
Fog/Driving Light Bulb Size: 880
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 3156
Front Sidemarker Light Bulb Size: 194
Ash Tray Light Bulb Size: 558
Glove Box Light Bulb Size: 194
Map Light Bulb Size: 168
Dome Light Bulb Size: 562
Step/Courtesy Light Bulb Size: 168
Trunk/Cargo Area Light Bulb Size: 212-2
Daytime Running Light Bulb Size: 3157NALL
Thank you for using fixya.


Apr 30, 2010 | 2000 Pontiac Montana

1 Answer

1998 pontiac transport/montana has not tail or break lights...turn signals blink fast or not at all. changed rear bulbs and noticed carbon on front build up on front bulbs. Help!


If one of the filaments in the bulbs is burned out, the remaining working lights will flash alot quicker.
Check the bulbs, and replace if the filaments are broken.
If the front bulb has a carbon build up it blown out...change it..
Once the bulbs are replaced your signals should work properly.

Dec 09, 2009 | Pontiac Trans Sport Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

1,517 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...