Question about 1996 Audi A4
Depending what side you need to change? Ive changed loads of these for my customers over the years, Golf's and A3's can both be a little tricky. Directly behind the lamp assembly you should see a large single piece plastic cover. x2 tags are visible at the top and have to be depressed for the cover to tilt backwards and upwards to lift out. Be aware, these tags can break so pushing the cover inwards slightly whilst depressing these tags will lesson the chance of breaking. The dip beam bulb is normally a type 499 and will have a 2 wire connector plug. Pull this straight back to remove. A sprung steel clip holds the bulb in place. With a torch you will see an obvious end to this clip. Depress and ease to the side to bring it out of line with its recess. It will no swing backwards and allow the bulb to be removed. Note the tag is upper most on the bulb. Dont touch the glass of the bulb with your fingers, hold it by the base, then reassemble in the reverse order. Hope this helps? Good luck
Posted on Jan 17, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 09, 2010 | 2006 Audi A6
on Jan 27, 2016 | Audi Cars & Trucks
Jan 21, 2010 | 2004 Audi A4
Jan 15, 2010 | 2006 Audi A6
Apr 27, 2009 | 2000 Audi A6
Apr 21, 2009 | 1991 Audi 90
Dec 16, 2008 | Audi A3 Cars & Trucks
Dec 15, 2008 | 2006 Audi A4
Dec 09, 2008 | 2001 Audi A4
Dec 09, 2008 | 2005 Audi A4
494 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: