Question about GMC Jimmy

1 Answer

Four wheel drive will not engage - Jimmy GMC Cars & Trucks

Posted by on

  • charlie Dec 17, 2008

    I have a 94 jimmy with electronic 4 wheel drive. when I ran the diagnostics it came back with a code 2. I checked all the connections and have the proper voltage at the plugs. but not the proper ground resistance at the actuator on the transfer case.
    can I just jump the wire to ground to the frame?


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If it is the electric shift the linkage or the sensor might be dirty

Posted on Dec 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 gmc sierra won't engage in manual 4 wheel drive


it sounds like the front differential is not engaging, check the solenoid on front diff.

Feb 09, 2014 | GMC Sierra Cars & Trucks

1 Answer

Four wheel drive wont engage


try and give more detail eg. what make and model?

Apr 11, 2013 | Cars & Trucks

1 Answer

Four wheel drive doesnt engage


Sounds like you have a bad switch.

Apr 21, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

I have a 1999 GMC Suburban. I have automatic four wheel drive but when I shift into four wheel high it makes clunking sound. I have not tried four wheel low. I wondered why I can still use auto four wheel...


the auto 4 wheel does the same as part time in jeeps, it engages only when the vehicle loses traction. when auto 4 wheel is on the truck isn't fully in 4 wheel drive. my 02 sierra makes the clunk noise too but it does engage. try checking your fluids, i know its way pass the time for me to change mine out.

Feb 09, 2010 | GMC Suburban Cars & Trucks

1 Answer

I have a 2001 Kia Sportage and took it to the shop two years ago to have the four wheel drive fixed it cost 550 now that we have 3ft of snow the four wheel drive went out again the light comes on but does...


See vacume pipes at the front wheels. sound like it is broken or pulled out by snow. there is 2 pipes one for brakes on calliper and one for vacume suction to engage or dis engage 4 wheel drive. Enjoy. Willem SA

Feb 08, 2010 | 1999 Kia Sportage

1 Answer

While driving, four wheel drive quit working. It


Check the fuse for the four wheel drive before taking another step,it is electrically engage,hope that help you and clear your mind

Jan 17, 2010 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Four wheel will not engage


you need to also check the relays that are in same circuit

Aug 14, 2009 | 2006 Ford F-150

1 Answer

1979 ford f-250 four wheel drive won't engage


I take it the transfer case shifter feels okay (shifts through all four gear positions), so try jack up one side of front end, rotate wheel while looking in knuckle to see if drive axle turns, if it does, then hubs engaged. Now if someone holds the front d shaft, and wheel won't turn, then both hubs are engaged. Next put t case in 4xhi or 4xlow, if you cant turn the wheel, then the t case is engaged, and all is normal. If wheel still turns at this point, then the t case is not engaged for some reason, but post again if it does. Hope this helps.

Jan 04, 2009 | 1979 Ford F 350

1 Answer

Four wheel won't engage


Theres a vacume dash pot under the battery box. It pulls a cable that engages the front diff. Put the vacume line and you'll have lights and four wheel drive. (it happened to my blazzer)

Dec 29, 2008 | 1991 GMC C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...