Question about 2003 Honda Civic

1 Answer

2003 honda door lock

I have removed everything off the door the inside handle, the panel the clips off the outside handle and nuts holding it to the door but the handle is still holding on to the side were the key is and I can't see any other clip or nut holding it can you help

Posted by on

  • 1 more comment 
  • fyapp Dec 17, 2008

    Thank you greg_vdk I see it. wow even now that I know what to look for it was hard to see. Thanks to you I got the job done.

  • Anonymous Mar 15, 2014

    plastic clip on rod to out door handle from lock on car

  • Anonymous Mar 15, 2014

    plastic clip on rod to out door handle from lock on car a result Scenic

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

There is a clip just behind the plate holding the key lock you need to pull the clip out then the handle will come apart the clip is shaped like a u if you use a mirror underneath the lock on the inside of the door you will see it

Posted on Dec 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing outside door handle on a chevy elcamino


with the inside door panel removed look inside the door towards the handle you will see 2 bolts/nuts that hold the exterior handle to the door. you will have to disconnect the lock clip that holds the rod to the handle that moves to open the door when you pull on the door handle.

Aug 29, 2014 | Cars & Trucks

1 Answer

Exterior door handle on 97 thunderbird


You will have to remove the door panel. To do this use a phillips screwdriver and remove the two screws under the inside door handle. Then lift and remove the section. Remove another screw from the interior lower left corner. Pry the window crank apart "if exists" then use a T20 torq bit to remove the screw in handle. Remove the panel by lifting and pulling at same time. With window in up position you can see inside the hole a rod going from the door handle to a bracket with a Yellow clip. Slide the clip to the open position and pull the rod out of the clip. From the outside of door under the handle there are two rivets. Use a punch and knock out the center of each rivet. Then use a 1/4" drill bit and drill out the rivet. A flat tip screwdriver will be used to knock off the rest of the rivet. You will need two flat head screws and lock nuts or to reinstall the handle. Lift out old handle with attached rod. Twist rod as you pull to remove it and install it into the new handle. Place the rod through the hole and look inside to be sure is will move to the location of the yellow clip.Install the screws from the outside and the nuts from the inside and tighten. From inside connect the rod to the yellow clip. Lift on the rod while closing the clip. Then test door handle. If it doesn't work properly the rod was not lifted or pulled outward enough. Redo that step until you get it right. Reinstall inner panel as removed.

Feb 26, 2012 | 1997 Ford Thunderbird LX

1 Answer

2003 for focus doors wont open outside handle feels loose and wiil not open latch


plastic door handles on this model break easy, buy on ebay or similar cheap places, dealer could be fair also, you need to remove the door handle from inside with 10mm nuts / screws, you need to remove the door panel, google instrucitions, once door panel is off it is simple, make sure you do not disconnect the switch connected to the door lock cylinder otherwise the car will not restart if so equipped, switch turns off factory immobilizer if equipped...make sure you connect the rod to the door handle and make sure you lock the clip on it before you reinstall door panel, test first....

Jul 13, 2010 | 2003 Ford Focus

1 Answer

How do I remove the outside door handle on drivers door on 1996 tahoe


hello there:
to replace the door handle you will need to take the inside door panel off and access the two nuts for the door handle disconnect the rod going to handle should have a plastic or metal clip holding it in place twist the clip off the arm of the handle rod and lift out then remove the two nuts and slide out the handle in stall in reverse hope this helps you out please leave a review thanks sincerely D.Jones

Jun 05, 2010 | 1996 Chevrolet Tahoe

1 Answer

I need to replace the door handle on my '96 honda civic, how do i get it off?


Pop off the speaker grill and remove the three screws securing the panel to the door frame. You do not have to remove the screws holding the speaker to the panel. Remove the window crank. There is a "U" shaped retaining spring holding the handle to the spindle. It can be removed with a special tool or just by pressing in on the panel and loosening the clip with a small flat blade screwdriver. Remove the screws in the arm rest and above the interior door handle lever.

Pull the panel from the door - be careful of the speaker wires - carefully undo the quick connect.


From the top corner, pull down on the plastic sheet.
Remove the square white plastic box that is used as a guide for the control bars.


Locate the exterior handle mechanism. There are 2 10mm bolts that hold the handle to the door frame. Remove them with a ratchet and extension.


Pop the retaining clip (it's green for the left door) free from the lock cylinder control rod, then pull the rod from the back of the lock cylinder.
Covering the back of the lock cylinder is a metal plate. Holding the plate to the cylinder is another "U" shaped spring clip that can be pulled down with a flat blade screwdriver.


After removing this clip, the metal plate will seperate from the cylinder. The culinder can then be pulled free from the inside and the handle from the outside.

Reverse the procedure to reinstall.

Its possible that need check the Honda-Civic-1996-1998-Service-Manual-Part-III

Hope help with this (remember comment and rated this post).

Apr 21, 2010 | 1996 Honda Civic

1 Answer

2000 cadillac deville remove door panel


2000-2001 Deville Door Panel Removal:

1. Position window fully downward and ensure manual lock knob is in unlock position.
2. Disconnect locking clip at front of manual lock knob, by insertingsuitable flat bladed tool into top service notch.
3. Remove manual lock knob.
4. Remove inside handle bezel by holding inside handle to open position, inserting sutiable flat-bladed tool at front lower corner and prying outward.
5. Remove bezel.
6. Remove inside door handle mounting screw.
7. Disconnect eight retainers around outside edges of door trim panel using clip zip tool No. J-36796, or equivalent.
8. Slide door trim panel upwards to release alignment datums, eight retainers, armrest steel retainer clips and inner belt mouldings (see fig #7 amd #8).
9. Disconnect electrical connector(s).
10. Reverse procedure to install.

23785ad.jpg

Hope this help (remember rated this).

Mar 28, 2010 | 2000 Cadillac DeVille

1 Answer

How to remove rear door panels on a 2003 ford f 250to get to door switch


Tailgate latch, handle and lock
  • Open the tailgate.
  • Remove the two bolts and detach the door stop.
  • Lower the tailgate and remove the tailgate access cover.
  • Disconnect the control rods.
  • Detach the retaining nuts and remove the handle and lock cylinder assembly from the tailgate.
...
Door trim panels
  • Disconnect the cable(s) from the negative battery terminal(s).
  • On manual window equipped models, pull the window crank cover aside, remove the screw and detach the handle.
  • On the front door of power window equipped models Pry up on the retaining clip at the front edge of the armrest and lift the armrest switch control plate out and disconnect the electrical connections,then remove the retaining bolt from the opening.
  • Use a small screwdriver to pry off the courtesy light cover for access to the trim panel retaining bolt.
  • Carefully pry off the mirror trim panel from above the front edge of the door panel.
  • Once all of the bolts are removed, remove the trim panel by gently pullingit up and out .Detach the courtesy light bulb housing from the panel.
  • For access to the inner door components, remove the speaker (if it would interfere with watershield removal) and the screws from the trim piece at the lower trailing corner of the door, then carefully peel the watershield from the door.
  • Remove the screws securing the latch.
  • Working through the large access hole, position the latch as necessary to disconnect the electrical connector and disengage the outside door handle and outside lock cylinder to latch rods and the inside handle-to-Iatch cable.
  • Detach the locking rods by unsnapping The remaining outside handle retaining nut can be reached through the access hole in the door frame and the upper striker the portionof the plastic clip engaging the connecting rod, then pulling the rod out of its locating hole.
  • Position the latch as necessary to disengage the door lock actuator hook. Detach the cable cover and disconnect the cable from the latch. Remove the latch assembly from the door.

Oct 30, 2009 | 2003 Ford F250 Super Duty Crew Cab

3 Answers

ELECTRIC DOOR LOCKS ONLY LOCK SOME TIMES


if you hit the lock button a couple times, will it finally lock?

If so, then you will need to take door cover off and lube up the connectors as they probably got corroded.

Aug 14, 2009 | 2000 Ford F350 Super Duty Super Cab

3 Answers

1997 buick park ave 4 door right front door handle won,t work from the outside


Order the exterior door handle AND the clip that attaches the rod to the exterior handle from your local dealership ( any part in the salvage yard will have at least as much wear as the one U are replacing ) Also order a can of touch up paint matching your car. After you have the parts and have painted the new exterior handle, roll down the window and remove the interior door panel. ( instructions have been posted at 'replace door lock buttom' ) Two nuts, one on each side, hold the broken handle in place and must be removed ( DON'T loose them ). Loosen the rod from the clip at the top to allow a bit more room, But take note on the way it is attached ( you will need to reattach the rod to new handle ) To install new mechanism put the new clip on the rod, carefully place the gasket and the new handle in place and install nuts to secure. Test the door handle and make sure it works. Reinstall interior door panel.

Jul 06, 2009 | 1997 Buick Park Avenue

2 Answers

Broken door handle


no matter what you do door panel has to come of if it is a two piece top and bottom better for you once it is off make sure window is up all the way disconnect handle rod most are held on with a lock clip from one of access holes in top of door then remove two mounting nuts on the handle bolts that come from the outside to the in the vhandle should come right out then have someone on the outside install handle threw door will you reinstall the two nuts on the threaded bolts on the inside reinstall rod to handle then door panel your done

Sep 11, 2008 | 2000 GMC Sierra

Not finding what you are looking for?
2003 Honda Civic Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...