Question about 1998 Chevrolet Blazer

2 Answers

1998 CHEVY BLAZER SOUNDS LIKE TURN SIGNAL IS ON BUT NOT

THOUGHT THE MODULE THAT MAKES THE TURN SIGNAL SOUNDS WAS FAULTY SO I REPLACED IT BUT STILL MAKES THE CLICKING SOUND. ALL LIGHTS SEEM TO BE WORKING PROPERLY. BUT NOISE IS COMING FROM THE MODULE FOR TURN SIGNAL. ANY SUGGESTION WHAT TO LOOK FOR?

Posted by on

  • 2 more comments 
  • dayglow_2000 Feb 10, 2009

    We had the smae problem, hubby replaced the multi switch and it's fixed!

  • Kysparky Mar 19, 2009

    Same clicking sound as JHC. Where is the multiswitch located?

  • Coroline May 15, 2009

    Sounds like the turn signal is on but it isn't. Turn signal works just fine, all lights respond accordingly. Emergency lights work just fine. Everything else is fine except for the sporadic clicking noise. What is it and how is it fixed?

  • Kara-Lee Joann Reifel May 18, 2012

    I'm having the same issue with the 98 Blazer I drive. It's driving my fiance crazy with all of that ticking, so I'm taking it upon myself to try to find him a solution. Where is the multi switch located? Is it a black box underneath the glove box that looks like a relay box?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

We had the same problem. Hubby replaced the multiswitch and that fixed it

Posted on Feb 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

First it could be another relay under the dash.... i'm curious tho... does it flash really fast... if so turn on the emergency flasher.. four way flasher.. whatever you prefer to call it.... and walk around the vehicle and check the lights.. you may have a bulb burned out.


Robert

Posted on Dec 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi: I have a 1998 Chevy Blazer 4.3 The brake lights and turn signals don't work.... HELP


Sounds like you have a bad multiple function turn signal switch. A couple things to try With your foot pressing on the brake pedal, Press the four way flasher button up and down, press and hold it down, pull up on it, or wiggle it. If the brake lights come on during any one of those replace the switch. With the key in the run position pull, push, the turn signal lever slightly. If the turn signal or brake lights start to work replace the switch. Let me know if none of those work, they usually do, and I'll get you some more in depth diagnostic info.

Jun 17, 2011 | 1998 Chevrolet Blazer

1 Answer

I have a 95 chevy blazer and my brake lights and signal are not working however the 3rd light works. Just replaced the signal switch and the brake lights work now however the signal still does not work. My...


Do the lights turn on on the dash when you signal left or right?

Do the four way flashers work?

If no to either of these check the turn signal flasher module.

Sep 28, 2010 | 1996 Chevrolet Blazer

3 Answers

How replace turn signal switch 2000 chevy blazer?


Since the 2000 chevy blazer is equipped with SRS (Saftey Restraint System), ie: Airbags, which is located in the steering wheel. In order to replace the turn signal switch you must remove the steering wheel. Therefore I would only highly advise you to take it to a dealer to have this done.

Oct 07, 2009 | 2000 Chevrolet Blazer

1 Answer

Noise like turn signal is on


 It could be your brake light switch may need adjustment or it's faulty. Try driving with your cruise control on and see if it dis engages or see if your brake lights fliker as your diving which is the harder of the two. 
Good luck and hope this helps.

Apr 08, 2009 | 1998 Chevrolet Blazer

1 Answer

Chevy blazer runs funny in 4 wheel drive


Hello,
Be sure that the joints on your front driveshaft are in good condition, hope this helps, good luck

Apr 03, 2009 | 1998 Chevrolet Blazer

2 Answers

No start, no spark, no signal to the coil


there is a fuse that works the battery try checking if it is still good

Mar 03, 2009 | 1996 Chevrolet Blazer

2 Answers

Replace the front turn signal light bulb


you have to go under the front of the car. very easy to fix.

Oct 21, 2008 | 1998 Chevrolet Blazer

3 Answers

Turn signal flasher won't stop


I believe you'll find the problem is on the, or IN the, switch arm. The turn signal arm has several switches in it and they get dirty...you can either...take the whole assembly off and replace it with a new one..cost around $150 for the part...or take it apart and clean and regrease it using electrical grease.....oooooooooorrrrrrrrrrrrrrrr just live with it as we have done for 7 years now...

May 29, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...