Question about 2004 Chrysler Voyager

1 Answer

Hi I'm Laszlo from Hungary, I have a Chrysler Voyager 2.5 CRD and the automotive starter doesn't rotate. I reloadt the accumulator 12V/62Ah, tried to start the engine from another car, changed the battery in the key. I think maybe the switch at clutch is wrong. I had no time the measure this swith. Can anybody help me? Any other idea? Thanks in advance. Laszlo

Posted by on

  • 3 more comments 
  • laszlo66 Dec 16, 2008

    Dear Robert,



    Thanks for your quick answer. I have manual shifter. Normaly my car engine doesn' start if I don't push on the clutch, therefore while I think that the switch is wrong there. The failure is : I push the clutch and start the engine with the key than all sign on radio, automatic climate control system, etc are off but the light inside stay on. The led on the right side of radio are blinking, but no rotation from automotive starter . Firs I think this is a battery problem because in my car a 1 year old 12V/62Ah battery, (I know this is small). But I loaded to full this battery and together with the battery of another car the failure is same. I'm electronic engineer If anybody can suggest something special solution I can do it if this is electrical. Now here 8 pm. I can do something just tomorrow morning.





    Regards,



    Laszlo

  • laszlo66 Dec 17, 2008

    I go out and want to start it but wouldn't start.



    Laszlo

  • laszlo66 Dec 17, 2008

    My engine has start. I has moved the connection at the switch of clutch and than set the key to position I. Now everything is work fine, but why ?

  • Roberta Smith
    Roberta Smith May 11, 2010

    did the motor suddenly die or did you just go out to start it and it would not start ?



    Robert

  • Roberta Smith
    Roberta Smith May 11, 2010

    first i presume accumulator is another name for a battery... correct me if i'm wrong on this... next i believe you are asking if it may be what is called the neutral safety switch. if it is an automatic ... try moving the shifter as you attempt to start it. was this all of a sudden that it stopped rotating or it's done this a few times before.



    Robert

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

First that sounds like the neutral safety switch... could have been corrosion on the contacts... sometimes you just need to move the shifter a little bit and that will fix it... glad you got it going

Robert

Posted on Dec 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi! I own a 2001 chrysler voyager 2.5 crd and need to know where the coolant temp sensor is located exactly?


Which one. There is one for the engine management system and one for the radiator fans.

Jul 30, 2014 | 2001 Chrysler Voyager

1 Answer

I have a Chrysler Grand Voyager crd 2.5 crd 2001. I am having trouble in replacing one of the glow plugs which is directly behind the distributor. There is not enough clearance to withdraw the plug from...


this is what happens when you try to make a chrysler a mercedes. Sometimes you have to charge more to work on these kind of cars and if the engine has to come out to get to it that is what it takes. I worked on a bmw that the pulley had a cover on the center you couldnt see any way to release it. I am guessing this is german technology bmw mercedes crd get it. Remove the cover off the tensioner and there is a bolt under i would lay odds on it loosen the pulley then is should have a way to turn a long bolt that iadjusts it for tension

Dec 12, 2010 | 2001 Chrysler Voyager

1 Answer

Idlind problem


Could be a Mass Air Flow sensor or the O2 sensor.
Probably will need to vosot your local tech or a friend that can "check codes" off the ECU.

Jan 09, 2010 | 2001 Chrysler Voyager

1 Answer

Automotive starter doesn't rotate.


You may have a bad starter. Does it click when you hit the key? Try having someone climb under it and tap on the starter with a bar or wrench, sometimes that helps.
Good luck!

Dec 16, 2008 | 2004 Chrysler Voyager

2 Answers

2002 Chrysler Voyager 02 sensor


From under vehicle, follow exhaust down from engine, eventually you'll see a piece about 3-4" long sticking out side of the exhaust with wire(s) going to it.

Oct 29, 2008 | 2001 Chrysler Voyager

1 Answer

New chrysler voyager se crd will not start reliably


Hi there I have a crysler 2002 model and my cd does not turn on. Can you please tell me where th fuse for it.

Regards
Tony

Sep 12, 2008 | 2002 Chrysler Voyager

1 Answer

Chrysler voyager crd


You must check the fluid right on the transmission because its a manual.

Aug 21, 2008 | 2001 Chrysler Voyager

Not finding what you are looking for?
2004 Chrysler Voyager Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...