Question about 2007 GMC Yukon

1 Answer

Problem with 2007 yukon

The following lights and conditions just occurred on my 2007 yukon: service stabillatrac light on, service traction control light on, engine power is extremely low and drives horrible!!

Posted by on

  • Anonymous Mar 20, 2014

    StabiliTrak Light on, Engine Power will slow & service engine light is on

  • Anonymous Mar 26, 2014

    traction control and esp lights on, low power

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The 3rd row is fairly simple, just pull the lever and make the back lay down on the **** part and the grab the handle that sticks out of the **** part facing you (you do have to take them out of the hatch area) and pull hard as they are heavy 50+lbs, the second row you do just the same except they come through the door on which the side they are on. Good Luck!

Posted on Jan 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Yukon Traction control and Chk engine light flash. Engine power reduced. How do i fix this?


Always always always start by getting the trouble codes read. These symptoms can be caused by a wheel speed sensor issue, wiring harness rub through, a dirty throttle body or a combination of all three. Asking us to guess is a complete waste of time. Get the codes and post them.
Service traction system service ESC Ricks Free Auto Repair Advice

Nov 27, 2017 | Cars & Trucks

1 Answer

My 2007 chevy suburban traction light came on and will not go off


Traction Control Off Indicator The IPC illuminates the traction off indicator when the following occurs.
?€¢
The EBCM disables engine torque reduction due to a malfunction and sends a serial data message to the IPC requesting illumination.


?€¢
The driver manually disables VSES and engine torque reduction by pressing the traction control switch. The EBCM sends a serial data message to the IPC requesting illumination.

Feb 07, 2016 | Cars & Trucks

1 Answer

My 2007 have a stabilitrak on and service traction control. Car fills like the brakes are on


Do you have a check engine light on? If so, get the codes using an OBD2 checker and see if the stabiltrak or/and the traction control are having problems. If not, pull the wheels and check the condition of ALL the brakes. Only one needs to be grabbing to give that effect.

Jan 24, 2013 | 2007 Chevrolet Equinox LS New Cars

1 Answer

How to reset stabilitrak on a 2007 chevy equinox


Your vehicle has electric power steering !
The Electric Power Steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the power steering control module (PSCM), torque sensor, power steering motor rotational sensor, power steering motor, discrete battery voltage supply circuit, and the GMLAN serial data circuit to perform the system functions. The PSCM and power steering motor are each serviced separately from the steering column assembly. However, the motor rotational sensor is serviced as part of the power steering motor, and the torque sensor is serviced as part of the steering column assembly. The PSCM also monitors vehicle speed from the engine control module (ECM) via the GMLAN serial data circuit. At low speeds more assist is provided for easy turning during parking maneuvers. At higher speeds less assist is provided for improved road feel and directional stability.
Stability System Indicator The IPC illuminates the stability system caution indicator when one or more of the following conditions exists. The EBCM sets any one of many VSES-disabling DTCs. The EBCM sends a serial data message to the IPC requesting illumination.
Traction Control System Indicator
TRAC OFF The instrument panel cluster (IPC) illuminates the TRAC OFF indicator when the following occurs:
?€¢
The electronic brake control module (EBCM) inhibits the traction control system due to a malfunction in the traction control system. The IPC receives a serial data message from the EBCM requesting illumination.


?€¢
The Body Control module (BCM) detects that the traction control switch has been pressed (signal circuit is low). The Body Control module (BCM) sends a serial data message to the EBCM in order to disable traction control. The IPC receives a serial data message from the EBCM requesting illumination. The BCM sends a serial data message to the radio in order to activate an audible warning.


Your best bet is to take it to a ASE certified an qualified repair shop ,that has the diagnostic tool to fix this problem .

Jun 17, 2012 | 2007 Chevrolet Equinox LS New Cars

1 Answer

My 2007 Yukon Denali has 86000mi on it. I shut it off and turned it back on 10mins later to see Service Traction Control, and Service Stabiltrak scrolling across the info screen. The truck runs poorly...


Ok just so you know that service traction control and stabiltrak well come on if there is any check engine light on and if it's running poorly then i have to guess that there is also a check engine light on!! Once there any repairs are done then you would have to clear out the codes in the ECM, traction and suspension in that order!! GOOD LUCK !

May 23, 2011 | 2007 GMC Yukon

1 Answer

My 2007 GMC Yukon will not start in cold weather. When I turn the key over the lights/dash controls come on, but the engine does not turn over at all. Nothing. Put a new battery in and still does it. ...


My 2007 GMC Yukon will not start in cold weather. When I turn the key over the lights/dash controls come on, but the engine does not turn over at all. Nothing. Put a new battery in and still does it. It is a random occurance. Would not start for two days this week so I had it towed to the dealership and the next morning it starts without the service dept doing anything??? Bring it home and two days later it does it again??? Any ideas?

Dec 14, 2010 | 2007 GMC Yukon

1 Answer

I am getting a message service traction control and stability track off


Is the abs light on as well?If so vehicle may have a bad bearing hub assembly.

Sep 14, 2010 | 2007 GMC Yukon

1 Answer

Service stabilitrak & service traction control


You need the system scanned with a special tool to determine the fault.

Mar 05, 2018 | 2007 GMC Yukon

3 Answers

03 Yukon Denali Traction Control/ ABS Problems


my 2000 yukon has the traction control light on and the abs light on any anwsers?

Jul 31, 2009 | 2003 GMC Yukon Denali

Not finding what you are looking for?
2007 GMC Yukon Logo

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

83081 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...