Question about 2006 Ford F-250 Super Duty
I can't locate the block heater cord for the 07 Ford Fusion.
behind glove box look under hood on pasnger side for two hoses going in to fire wall this is where your heater core will be located if you need more help call me at 850-791-4498
Posted on Dec 05, 2008
The block heater is already installed in your 6.0. The cord may not be there as it is an option in some states and standard equipment in others. The best way to see if your cord is there is to crawl under and look up by the # 4 cyl and you will either see 2 prongs sticking out for the cord or you will see the cord. The cord should end in the front bumper behind where the front tag would be. If you dont have the cord Id suggest getting it off ebay as it should be cheaper than the dealer. Hope this helps.
Posted on Jan 16, 2009
MIne was on the passenger side inside the wire loom next to the shock. You can get to it through the fender well. It just looked like a ball of tape and only the plug itself was exposed with the rest of it doubled back on itself inside the loom. It was actually long enough to stick out of the front of the truck.
Posted on Jan 18, 2009
It is located on the there where it says.....but if u are like me took a mechanic to find mine on my 99Grand cherokee.......when u look at the vechile motor it comes out in a acordian type hose ....not the flat electrical like I was looking for........but mine was still on the inner fender......never used before at all..........when u look directly at your engine it comes out from behind on the left corner of everything on the inner fender ........mine was founded when changing my plugs and wires.......
hope this helps .......let me know ........if not will take a pic as to location and send it too you on here......
I also have a 99 Chrysler Town and Country LXI van and I cant find it on that so maybe someone could help me on that one......
Posted on Jan 30, 2009
None on the block, other than freeze plugs...
The only drain is on the bottom of the radiator (you knew that)...
I installed a Prestone motor flush kit and it flushes just fine, but does not "empty" the engine cavities. This is better, anyway.
You have to splice a "Tee" fitting into a convenient heater hose (highest one).
Hope this helps..
Posted on Sep 10, 2009
The IAT is integrated with the MAF sensor on the 09 Fusion. The MAF is located near the air box on all three engines. on the driver's side, and will be held to some part of the intake tubing by 2 torx screws. http://media.photobucket.com/image/2009%20Fusion%20MAF/itsamecameron/fusion4cylengineMAF.jpg 2.3L shown, 3.0 and 3.5 should be similar.
Posted on Oct 04, 2009
Tips for a great answer:
May 18, 2015 | Ford Cars & Trucks
Jan 08, 2015 | Ford Cars & Trucks
Nov 14, 2014 | 1999 Ford Taurus
Sep 13, 2012 | 2006 Ford Fusion
Aug 21, 2012 | 2007 Ford Fusion I4 SEL Sedan
Nov 20, 2010 | Ford Escape Cars & Trucks
Sep 28, 2009 | 2006 Ford Fusion
Dec 22, 2008 | 2005 Ford F 350 Super Duty
1,047 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: