Question about 1990 Lexus LS 400

1 Answer

1990 Lexus SL400

Lights on license plate is out , how do I replace it ? I don't have an owners manual. Where do I look to change light.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 92 Answers

There is usually a housing for the light with a screw holding it in place

Posted on Dec 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My license plate lights dont work help?


the bulb is most likely burned out. there are a few types of license plate lights out there. some where you have to replace the whoel unit and some that have replaceable bulbs. both you can find at your local parts store.

Jan 30, 2010 | 1990 Nissan Pathfinder

1 Answer

How do i replace the license plate lights on my 1990 honda accord. i can't get the bulb out of the socket


You should have two license plate lights, right above the license plate. If you remove the two screws that hold the one you want to change in, the entire fixture will drop down(best to do this with the trunk open). Remove the metal clip plate that covers the bulb. The bulb SHOULD simply pull directly out.
Hope this helps you.

Oct 21, 2009 | 1990 Honda Accord

1 Answer

License plate lights go out when the trunk is shut


try looking at the wiring from the light and fallow it back to the fuse, sounds like a short in the wires if not change you fuse, you can find it by looking in your owners manual,

Apr 29, 2009 | 2004 Honda Civic

1 Answer

How do I change the license plate lights on a 1997 Lexus ES 300?


Open the deck lid (trunk) to better access the lights. There will be 2 of them. Recommend replacing both at the same time even if only one has failed. Generally sold in pairs anyway.

Directly above the license plate will be mounted 2 clear light covers. On the right side of each light cover you can see a small plastic rivet. Push in the center 1/4 inch with a small screwdriver then you will be able to pry out and remove the rivet without damaging it. This will save you from buying replacement plastic rivets for re-installation. Remove the light cover with the bulb harness attached.

The bulb harness requires a short turn counter clockwise to remove it from the light cover and the new bulbs snap into the harness. No twisting or screwing. Replace the bulb harness the same way and fasten the light cover back into place using the plastic rivet.

Saves time because both bulbs and light covers are exactly the same style, there is no left or right. Cheers!

Apr 29, 2009 | 1997 Lexus ES 300

1 Answer

Tag light is not working on 2002 Lexus GS300


I'm guessing you are referring to the license plate light. There are two bulbs. Pretty rare for both to go out at the same time. It could be the fuse. You can check if the fuse location by looking at your owners manual.

I think the license plate bulb is W5W LL. (Check to make sure). You can find the bulb a your local auto store, Walmart, Target, etc....


Dec 24, 2008 | 1998 Lexus Gs 300

1 Answer

Dome light/license plate light out


check the fuse panel and make sure you dont have a blown fuse. If one looks black replace it. Check your owners manual for fuse panel location and for specific fuse.

Dec 20, 2008 | 2003 Pontiac Bonneville

1 Answer

Burned out license plate bulb


open trunk,

remove felt liner from rear of trunk, (liner directly behind rear lights in side trunk) should be 4 plastic Phillips head screws. Loosing screws, then slowly peel liner away. You will see 3 nuts on each side, removing these nuts will loosing the rear light lenses, so you can pull the lense away from the body from the out side to gain access to the license plate bulbs. Re-install in reverse order. While in there I would recommend replacing your brake light and reverse light bulb. Hey your already in there might as well do a little preventive maintance.

Dec 12, 2008 | 1995 Lexus ES 300

1 Answer

Change License Plate Light Bulb


you should be able to get to thru the trunk

Dec 10, 2008 | 1995 Lexus ES 300

1 Answer

Replace license plate lamp


push the fastener pin in. and pull light off . its easy just dont loose the fastener pin.

Nov 23, 2008 | 1996 Lexus ES 300

1 Answer

License Plate lamp burned out.


you'll see the lights plugged in under rear bmper. grasp the light plug,twist counter clkwise 1/4 turn, pull out plug, pull bulb strait out, push new bulb back in.

Nov 11, 2008 | 1998 GMC Suburban

Not finding what you are looking for?
1990 Lexus LS 400 Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...