Question about 2002 Chrysler Sebring

1 Answer

2001 chrysler sebring will not go above 25 code p0700 p1684

6 cylinder

Posted by on

  • Anonymous Mar 15, 2014

    p0700 & p1684

  • Anonymous Mar 21, 2014

    The airbag light stays on in my 2001 Sebring. I scanned for codes and there were none.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 21,932 Answers

Something has triggered the fail safe ,could be anything from a tail light bulb out to low brake fluid level,but i could be wrong of course and no doubt i am.europeon cars use encrypted software thats designed to be dealer only, american cars ??dont know about this but iam assuming their standard as lots of boy racer ,sunday car mechanics type tools for fault reading??here on a europeon car they tell you your not connected ??connection pins in different places and encrypted software.. makes any fault a dealer only job and lots of money,just to connect computer is around 80€ before you evan pay labour .

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have chrysler sebring 2004 I need the name for 3 codes p0562 , p0700,p0499


P0562 - system voltage low (speed control and idle control system)

P0700 - transmission control system malfunction

P0499 - evaporative emission system vent valve control circuit high

Dec 29, 2015 | Chrysler Cars & Trucks

1 Answer

Why my 2001 town & country 3.8 will not shift gears?


p1784 shift up /down wire open,,,P0700 Transmission Control System Malfunction

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com

P0732 Gear 2 Incorrect ratio

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com

Apr 23, 2015 | 2001 Chrysler Town & Country

1 Answer

Error code 0700 aa1 aa2


Hi there:
The DTC P0700 is a Information Code The Transaxle Control Module (TCM) that monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM.
This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it, which can only be done with a diagnostic scanner. The self retreival method for chryslers with the ignition key will not pull up the specific transmission fault codes in the TCM.


Hope this helps.

Mar 30, 2012 | 2001 Chrysler Town & Country

1 Answer

Can not locate the starter on my 96 convertible sebrign


In 1996, Chrysler made Sebring Convertibles with two engine types:
Select the engine of your 1996 Chrysler Sebring Convertible:

Available engines
4 Cylinders X 2.4L SFI DOHC
6 Cylinders H 2.5L MFI

The VIN 8th digit will be "X" or "H" as in the table above.

Dec 12, 2011 | 1996 Chrysler Sebring

1 Answer

2004 Chrysler Sebring won't start with P0700 error code


Code P0700 just means the trans computer has a code. You need to have the trans computer read to get the trans code p0034 the rubber turbo hose to the inlet manifold which had a small split in it causing it to loose pressure these codes will not make your car not start check battery to see if its dead again does the engine turn over at all when you put battery back in car is terminals tight

Dec 05, 2011 | 2004 Chrysler Sebring

1 Answer

0700 code gets stuck in 2nd gear


Hi, the 0700 code is not explanatory, Code P0700 simply means that there is a code stored in the transmission control unit which sounds like you are in a limp mode. The first thing we need to do is get these codes. They will have to be read with a code reader or scan tool. Almost all parts stores will read codes for free. If you could have the codes read and come back and post them here I'll be able to tell you what to do to fix it.

Jun 25, 2011 | 2001 Chrysler Sebring

1 Answer

P0700 code, but nothing seems wrong.


p0700
Transmission control system malfunction

Aug 26, 2010 | 2005 Chrysler Sebring Conv

1 Answer

Code PO740 and PO700 show on scanner for 2002 Chrysler Sebring LX. What's going on?


Best to have a transmission place work on this.
Here are the meaning of the codes:
P0700 Transmission Control System Malfunction
P0740 Torque Converter Clutch Circuit Malfunction

It maybe cheap to fix like a bad sensor. Or it maybe something serious going on. Best to have a transmission shop check it out.
Good luck.

Apr 14, 2009 | 2002 Chrysler Sebring

1 Answer

Scan tool will not erase code # P-0601/2001 chrysler sebring 2.7


Sounds like a bad PCM.A dealer may be able to reflash the thing but not certain.Do a web search for the above code and you'll get all kinds of info. Good Luck

Mar 28, 2009 | 2001 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...