Question about 1984 Chevrolet Camaro

1 Answer

Camshaft i have a erson camshaft number is tq20h you told me the duration thanks i woluld like to know if you think it would work on a 3/8 mile oval stock car track

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 599 Answers

You must have 2wo posts..check other post...glad to help any way i can ... let me know...

Posted on Dec 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2004 xg350 had 152 thousand miles when I bought it. Drove it only 3 thousand miles and it stopped running. Had it tested by Hyundai mechanic was told the problem is P-1192 ETS failure, plus P-0340...

ETS ( electronic throttle sensor ) and camshaft position sensor can be obtained from a wreckers /junk yard for good prices
or you can go genuine
the real cost is the quotes from service shops to replace the items

Nov 25, 2017 | Hyundai Cars & Trucks

1 Answer

The duration and lift for 1971 Lincoln 460 CI engine camshaft

COMP Cams® - Ford Engine Technical Specs and Information Block, 426 Hemi, 1966-1971 .... With the V8 engine sizes ranging from 221-460, there is an engine size and configuration to cover just about any need or application. ...The 4.6L version of this engine first came out in the 1991 Lincoln Town Car ... All of the factory valve springs are designed to work with a certain lift cam, ...

1969 460 Cam Profile? Please Help - Ford Truck Enthusiasts Forums
Sep 18, 2004 - I have searched enough to know that a 1969 460 from a Lincoln had 365 hp and about ... to look at the stock engine blueprints they have but they do not list a 460 until 1971. ... lobe lift .253/.253, valve lift, .443/.443 dur 276/276 ..... Diesel Engine Fuels, Competition, Performance, Engines & Troubleshooting ...

Oct 03, 2015 | Lincoln Cars & Trucks

1 Answer

The cam cam out of a 71 corvette no info on the lift or duration. got engine to build ,while taking it apart cam looks new maybe reuse if i can i.d it any info will be apreciated

Look up the number on the block that you pulled it from you,ll get your lift and duration if stock cam and or look for stamp on cam if not stock this link shows how to measure the cam also

How to measure camshaft lift - YouTube

? 2:28
Feb 25, 2012 - Uploaded by Emil Davis
Here I show you how to measure camshaft lift with the cam out of the the engine. All you need ...

Sep 11, 2015 | Cars & Trucks

1 Answer

I am changing the timing chain in a 1993 Chevy S-10 with a 4.3L engine. I was told you have to disconnect a wire to reset it but I don't know where the wire is.

Timing Chain: Service and Repair
Tools Required = Crankshaft Sprocket Puller
1. Remove the timing cover.
2. Remove the crankshaft position sensor reluctor ring.
3. Remove the camshaft sprocket bolts.
4. Remove camshaft sprocket.
5. Remove timing chain.
6. Remove the crankshaft sprocket.
7. Remove crankshaft sprocket key.

1. Install the key into the crankshaft keyway.
2. Use the crankshaft balancer installer to install the crankshaft sprocket.
3. Install the camshaft sprocket and timing chain.
4. Install camshaft sprocket bolts.
Be sure to align the camshaft and the crankshaft sprocket marks. Timing marks (Number 4 Firing).
Tighten bolts to 21 ft. lbs.
5. Align the keyway on the reluctor ring with the key in the crankshaft.
6. Install the reluctor ring onto the crankshaft until the ring is completely seated against the crankshaft sprocket.
7. Install the timing cover.

Don't know what Wire you are referring to.

Jul 30, 2013 | Cars & Trucks

1 Answer

Is a 97 2.4L GM motor capable of oval track racing performance. I've heard the oiling system and water pump can't handle it. Also been told that they work fine? What is what?

yes the 2.4 dual cam works well and fits great in most eco stock racing rules. I run one on a 3/8 mile high banked dirt track. The engines are light and so are the cavaliers. The waterpumps are not the easiest but i did not find it near as hard as everyone online cried about to change. Im not sure yet on the oil pump having a fualt to the bottom end issues, i lean more on the counter balance shafts airiating the oil at high rpms.

Feb 10, 2013 | Cars & Trucks

2 Answers

Partner hdi how far beetween timing belts

According to service manual after 80,000 miles in normal use; or 48,000 miles for arduous use. A lot of stop-start driving is known as arduous use. But to be on safe side, give a call to peugeot dealer and all informations are free of charge.

Jan 09, 2010 | Peugeot Liberte Cars & Trucks

1 Answer


90000 km (56000 miles) or 6 years (what ever comes first)

Jan 06, 2010 | 2000 Chrysler Cirrus

2 Answers

A bad camshaft position sensor for a 2.4L 2005 dodge stratus

THE CAMSHAFT POSITION SENSOR IS LOCATED ON THE LEFT SIDE OF THE HEAD. 2 BOLTS AND AN OVAL FLANGE. IT HAS A RED LOCK ON THE PLUG WHICH YOU JUST MOVE TO THE RIGHT TO RELEASE THE MAIN PLUG. BUT I dont know if thats your problem. the timing belt seems to fail on these cars prematurely. Dodge recomends 90,000 miles but many cars bend engine valves before this due to the timing belt. (around 83000-88000) miles. I would reccomend having someone look into this problem first. Also trying this yourself can be costly, simply because the timing belt MUST be installed properly and exactly. If this is not done the engine could be at risk causing expensive repairs. Ihave a friend who had the timing belt replaced by an individual and the i recieved it on a tow truck. Which it now cost them 1600.00 to repair. I have been a mechanic for 15 years. But i got smart and went back to college and npw i am a refrigeration technition. Just trying to help you out. any ? i would be glad to help.

Jun 22, 2009 | 2005 Dodge Stratus

1 Answer

A6 engine ''deep rattling'' noise

go to - i use this guy a lot - you just have to sign in - first name only! or whatever you want to call yourself. it is 100 percent free and he is an expert on all cars - you can expect an answer within an hour or so! this guy knows more than one person should know - trust me - no fee for free info? cant go wrong

Jan 03, 2009 | 2004 Audi A6

1 Answer

Cam shaft lift

rpm range =2000 to 5400....
advertised duration =292 In 292 EX.
duration at .050=214 In 214 EX
gross lift .463" IN .463" EX
lobe center 111
advance 4
valve lash .000 IN .000 EX

a good mid and top end performer ...good luck

Dec 16, 2008 | 1984 Chevrolet Chevy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides