Question about 1993 GMC Sierra K1500

1 Answer

1993 GMC Sierra 4x4, no brake lights, no rear running lights

Got rear ended the other day. Don't feel like making the guy pay through the nose this close to x-mas so I'll try to fix it first, when he hit me he only broke my trailer plug which crossed over the connectors and blew a fuse. Replaced the 20 amp park light fuse and removed the broken plug which gave me my dash lights, signal and my hazards back but I still don't have rear running lights and brake lights and all the other fuses look fine.

Posted by on

  • Anonymous Jan 25, 2009

    My brake lights want work when I turn on my headlights also brake lights don't work when blinkers are on. Blinkers blink real fast.

  • Barry May 11, 2010

    check for power at the tail light socket or wire and if there is power search for a broken ground wire

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If you still have this problem maybe this will help. I had to replace the trailer plug on a 93 GMC Sierra K1500 and had a problem with the light's not working. Had to trace wires from trailer plug up to tail lights. The problem was a broken ground wire. It took longer to remove all the tape and replace it than fixing the problem.

Posted on Jan 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Right rear brake and turn signal out running lights work 93 gmc sierra


Same thing was wrong with my 95 gmc it was tail light assembly that bulbs plug in to 15dllars eBay or 68 dollars at dealer ?!!!

Jan 20, 2013 | 1993 GMC Sierra

1 Answer

We can't get the alternator to get entergized to


brake wire to brake lights ? or wire to brake switch?
alternator sounds like a possible broken wire in the charging circuit.

Feb 12, 2012 | 1993 GMC Sierra K1500

1 Answer

What makes a front end shake on a 2004 GMC Sierra 1500 4X4?


FRONT END SHIMMY AND SHAKING COULD HAVE A TIRE OUT OF BALANCELOOSE OR WORN WHEEL BEARINGS, WORN OUT BALL JOINTS,WORN OUT TIE ROD ENDS, FRONT END NEED ALIGNMENT.BRAKE ROTOR WORN OUT OR WARPED, MANY THINGS WILL CAUSE FRONT END TO SHAKE SHIMMY.

Aug 09, 2011 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

How do i properly put put my 4x4 lever in gear,do I need to be in nuetral or park or can I do It while driving its a 1993 gmc sierra and appears to slip out of 4x4 periodically and feels it dosent go into...


The GMC I had you stopped, put the gear selector in Neutral, selected 4x4, put the gear selector in reverse and backed up a little then moved it to drive. Same procedure to go back to 2 wheel drive.

Dec 13, 2010 | 1993 GMC Sierra K2500

1 Answer

Went to start my truck Sun morning and it idled very sluggishly. When it was given the gas it hesitated. Applied brakes and it died but started right up. No warning hadn't driven it for a couple of days,...


I own a 93 GMC and I have had this happen a few times, First its a chevy they are cold blooded take a bit to warm up and get heat. That and im sure the oil had not warmed up and gotten up to the top end. Let it warm up then try it out.

Nov 02, 2009 | 1993 GMC Sierra K1500

1 Answer

Rear-end grinding noise in 1993 GMC Sierra 1500


your description sounds like the gears inside the the same differential you just replaced.

Oct 13, 2009 | 1993 GMC Sierra K1500

1 Answer

Rear wheel came off while driving!


the answer is yes but it is held on by a clip ring located at the bottom of the shaft if replaced make shure that you feel it lock in and it should be fine also make sure to put grease on the end of the shaft

Oct 03, 2009 | 1996 GMC Sierra

1 Answer

1999 gmc sierra rear brake trouble


Most likely a the caliper needs to be replaced. Could be more than that though, maybe brake hose. open brake bleeder and make sure you are getting brake fluid from the hose.

May 31, 2009 | 1999 GMC Sierra

2 Answers

How to replace a brake light switch for a 1989 sierra gmc 1500 pick up truck


Look up under dash where brake pedal pivots, you should see a switch that is activated by pedal arm.

Mar 07, 2009 | 1989 GMC Sierra

Not finding what you are looking for?

Open Questions:

See all 1993 GMC Sierra K1500 Questions

Cars & Trucks Logo

816 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...