Question about 1991 Honda Prelude

1 Answer

How do I change the alternator on a 1991 honda prelude...is it easy to do myself or should I take to a mechanic if its location is difficult to reach?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

It shouldn't be to difficult to do if it is accessible. Disconnect the battery first, then loosen and remove belt, remove wires and plug from alternator, then remove connecting bolts to the alternator, just go back in reverse order. Hope this helps!

Posted on Dec 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Freeze plugs


usually the freeze plugs are located on the engine block underneith the heads.

Mar 18, 2010 | 1991 Honda Prelude

1 Answer

Replacement of Alternator on 1989 Honda Prelude


Very difficult indeed. Try 1/4 drive ratchet or 12mm box end wrench--bottom bolt goes through the adjuster-really can't see it-slow go but do able

Feb 05, 2010 | 1989 Honda Prelude

1 Answer

My 1991 Honda prelude has lost a headlight ground. Where is it?


There are fuses for the headlights, right and left. G201 is the ground connection number. I have no picture but its located RH Center of eng compartment. Usually on the radiator support.

Dec 16, 2009 | 1991 Honda Prelude

2 Answers

1991 honda prelude speedometer not working,what is


Probably the Vehicle Speed Sensor (VSS). Cheap and easy to change (see ebay), once found! Probably on top of gearbox, to rear.

Aug 06, 2009 | 1991 Honda Prelude

1 Answer

Where is the thermostat located on a 1991 honda prelude


its located on the upper radiator hose. You could see a joint in which the hose is attach. remove the 2 bolts and make sure after replacing it to seal it properly before bolting it back.

Jul 10, 2009 | 1991 Honda Prelude

2 Answers

Honda prelude si 1991


Hi you are going to need an idle air control motor. This motor/sensor is what holds your idle at the correct rpm at idle.

Mar 27, 2009 | 1991 Honda Prelude

1 Answer

Transmission dipstick


Look on ths side the transmission is located on, and look for a yellow handled dipstick. It should be on the front of the transmission somewhere

Mar 21, 2009 | 1991 Honda Prelude

1 Answer

Changed alternator in a 1987 honda prelude, caused a new problem


check the drive belt and make sure no vacuum lines got knocked off especially the one behind the throttle body and put some STP in the gas tank make sure it has at least a half a tank of gas when adding

Jan 18, 2009 | 1987 Honda Prelude

3 Answers

Wheel bearing?


If it is a howling noise it is most likely your bearing (kinda sounds like an airplane)

You should also check the tires for broken belts and bulges. As well as that they are properly balanced.

Jan 06, 2009 | 1991 Honda Prelude

Not finding what you are looking for?
1991 Honda Prelude Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...