Most stereo functions just stopped working.

It is a known issue

2006 300C Radio Display Has Gone Our, but Radio Still ...

300C Forums https://www.300cforums.com > threads > 2006-300c-r...
Feb 26, 2012 - Then the Radio LCD screen goes blank, but the radio and the preset stations still work fine. Once the LDC screen goes out, the radio controls ...
300C LCD Radio Screen goes out but radio still works?
Feb 26, 2012
8.4 screen blank, HVAC controls not functional
May 23, 2018
300 Stereo Problem (With Picture!)
Jul 26, 2014
2017 300C radio/uconnect issues
Jun 24, 2020
More results from www.300cforums.com

My Chrysler 300c 2006 radio screen is black, on/off work and

JustAnswer https://www.justanswer.com > chrysler > anxib-chrysle...
Sep 8, 2017 - This sounds like the display board in the radio has failed. But try rebooting the radio first by disconnecting the negative battery cable (in ...
1 answer · Top answer: Hello, my name is ***** ***** I will assist you today. This sounds like the display board ...

Q: 2006 Chrysler 300 limited edition radio screen went black.

YourMechanic https://www.yourmechanic.com > Questions
Jan 25, 2017 - I have a 2006 Chrysler 300 limited edition, and the screen went black on my rec nav. I can only change preset stations, eject CDs, adjust volume ...
1 answer · 36 votes: Hello. The issue you are having with your radio is a common problem with Chr

If its got a factory amp and its bad you will get those symptoms.

they have a stock deal called scv (speed contoled volume) gt the correct radio

time to rip it out and fit a after market one ,it sounds like microprocessor has packed up and its cheaper to replace than mess around trying to get it repaired

check your fuses first. You may have blown one.


Visual Inspection Chart Mechanical Electrical

• Integrated control panel (ICP) physically damaged, misaligned, any control(s) inoperative
• Digital audio compact disc player physically damaged, misaligned, any control(s) inoperative
• Antenna or antenna cable physically damaged, misaligned connection(s)
• Radio speakers, mounting/speaker cones physically damaged, misaligned
• Radio ignition interference capacitors, radio frequency interference suppression bond misaligned (also check for cleanliness and metal-to-metal contact)

• Battery junction box (BJB) fuses F127 (5A), F117 (20A), F127 (5A).
• Central junction box (CJB) fuse F227 (10A) F211 (15A), F216 (15A), F226 (10A) (wagon only)

1. If the fault is not visually evident, proceed to diagnose the integrated control panel (ICP) by entering the ICP Self-Diagnostic Mode.

ICP Self-Diagnostic Mode
NOTE: To enter the ICP Self-Diagnostic Mode, the ICP must be ON and in radio tuner mode (AM/FM).

1. Enter the diagnostic mode by pressing and holding preset buttons 3 and 6 simultaneously. This will suspend all radio functions, and display SP.

1. Preset Button 1 = Audio internal/external SELF TEST. The display will flash SELF while gathering the diagnostic trouble codes (DTCs), then stop flashing when complete. Press the TUNE UP button to display the DTCs if any exist. Record codes and refer to the following table:

ICP SELF-TEST CODES Code Description 0 No diagnostic trouble codes logged 1 No response from rear chassis unit (RCU) 2 No response from cassette player 3 - 4 No response from compact disc player 5 - 6 - 7 No response from remote climate control 8 - 9 Read Only Memory Verification failed

1. Preset Button 2 = Displays the feature strap for code identification, refer to the following table.

Code Description 01 Base-Electronic Search Radio (ESR) with Manual Climate Control (MCC) 07 Electronic Search Radio with Cassette (ESC) with MCC 17 ESC with Electronic Automatic Temperature Control (EATC) 97 Not programmed default of ESC with EATC

1. Preset Button 3 = ICP and RCU identification. This test identifies the software level of the ICP and RCU. The ICP is tested first, followed by the RCU. The display will have two sequences of three codes each. The first sequence is for the ICP, the second sequence is for the RCU. For code identification, refer to the following table:

Item Part Number Description 1 - Product variant code 2 - Tape model 3 - CDR


SOFTWARE IDENTIFICATION CODES Product Type Code Description Product Variant Code Description 21 ICP 07
08
09
10
11
12 EATC with AM/FM, cassette player and CD changer
EATC with AM/FM and cassette player
Manual A/C with AM/FM and cassette player
Manual A/C with AM/FM
EATC with AM/FM and cassette player
EATC with AM/FM cassette player and CD changer 31 RCU 01
02
03 Analog
Digital
Midline 71 Remote climate control 01 LH drive 52 Compact disc/disc jockey 01
02
03
04 Sony® 10 disc
Sony® 6 disc
Clarion® 6 disc
FMS 6 disc

i had this prob in my ford truck, i took a long tweezers and helped it out while hitting the eject button didnt have a prob since

the cheapest way to go is a replacement from a wrecking yard, unless it is an aftermarket stereo then the cost rises

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_00678fd4800d19c5

try using a cd cleaner first

The same thing happens with my 2005 Jeep.

You have to have a dealer or authorized repair facility contact the mfr to get the code. you will more than likely need proof of ownership.